An efficient method for a numerical description of virgin olive oil color with only two absorbance measurements

Four polynomial expressions are obtained that provide a good approximation and an easy, rapid calculation of the chromatic coordinates and the chroma—L ^*, a ^*, b ^*, and C—for the illuminant C and the standard observer, for a virgin or extra virgin olive oil; absorbance is measured at only 480 and 670 nm. These are as follows: L ^*=0.556458(A₄₈₀)²−2.51145A₄₈₀+0.55504(A₆₇₀)²−8.53016A₆₇₀+98.4089; a ^*=0.177372(A₄₈₀)²+2.1363A₄₈₀+1.43254(A₆₇₀)²−0.789231A₆₇₀−13.9246; b ^*=−16.0277(A₄₈₀)²+79.8932A₄₈₀−5.06558(A₆₇₀)²+3.36169A₆₇₀+31.9405; C=−15.8439(A₄₈₀)²+78.9312A₄₈₀−5.26784(A₆₇₀)²+3.56917A₆₇₀+33.3927. These give acceptable results, making the method a practical alternative to the extremely laborious Commission Internationale d’Eclairage (CIE) L ^* a ^* b ^* system, by which 391 absorbance values must be measured individually, nanometer by nanometer, before applying more complex equations. The validity of the proposed method has been confirmed by comparison, using a set of 20 sample oils different from the set of 25 oils used to generate the order of the equations. The variations between the values provided by the proposed and standard methods, respectively, had a mean of 0.00 for each of the chromatic variables—L ^* , a ^* , b ^* , and C; SD were moderate (0.71, 0.52, 1.22, and 1.22, respectively); the root mean square and the R ²-terms also confirmed the validity of the method.     

Interaction between dietary protein and fat in triglyceride metabolism in the rat: Effects of soy protein and menhaden oil

The objective of the present study was to determine the mechanisms by which dietary proteins interact with dietary lipids in the regulation of triglyceridemia in rats. Male Sprague-Dawley rats (n=56) were subjected to 28-d experimental diets containing different combinations of proteins (20% w/w) and lipid sources (14% w/w): (i) casein-menhaden oil, (ii) casein-beef tallow, (iii) soy protein-menhaden oil, and (iv) soy protein-beef tallow. Significant protein-lipid interactions were observed on triglyceridemia and hepatic cholesterol in fasted rats. The combination of casein and beef tallow was associated with high plasma TG and hepatic cholesterol concentrations, which were reduced by substitution either of soy for casein or of menhaden oil for beef tallow. Therefore, triglyceridemia and liver cholesterol remained low with soy protein feeding, independently of the lipid source, as well as with menhaden oil feeding, regardless of the protein source. The menhaden oil diets reduced plasma cholesterol, hepatic TG, and TG secretion compared with beef tallow diets independently of the dietary protein source. Modifying the source of dietary proteins and lipids had no effect on post-heparin plasma lipoprotein lipase activity. These results demonstrate that soy protein can lower rat triglyceridemia relative to casein when associated with beef tallow consumption, whereas menhaden oil can attenuate hypertriglyceridemia when rats are fed casein. The data further suggest that part of the hypotriglyceridemic effect of soy protein in the rat may be mediated by reduced hepatic lipid synthesis, as is the case for menhaden oil.     

Effects of the blending sequence and interfacial agent on the morphology and mechanical properties of injection molded PC/PP Blends

Summary The effects of blending sequence and the addition of an interfacial agent (triblock copolymer styrene-butylene ethylene/styrene, Kraton G1652) on the morphology and the mechanical properties of Polycarbonate (PC)/Polypropylene (PP) blends prepared by injection molding were studied. This study presents an analysis of impact resistance, tensile properties and morphology of the raw materials and the blends at different compositions. The blends, before being injected, were prepared in a twin-screw extruder by different sequences of blending. The results indicate that the blending sequence and the presence of humidity significantly affect the properties and morphology of the blends. For ternary blends (PC/PP/Kraton), only one-step mixing before injection molding proved to be sufficient to improve mechanical properties. Increasing the amount of blending steps did not present a significant change in properties. With the addition of the interfacial agent, higher impact resistance and particle size reduction were observed.     

In situ esterification of rice bran oil with methanol and ethanol

In situ esterifications of high-acidity rice bran oil with methanol and ethanol and with sulfuric acid as catalyst were investigated. In the esterification with methanol, all free fatty acids (FFA) dissolved in methanol were interesterified within 15 min, and it was possible to obtain nearly pure methyl esters. The amount of methyl esters obtained from a given rice bran was dependent on the FFA content of the rice bran oil. In the esterification with ethanol, it was not possible to obtain pure esters as in methanol esterification, because the solubilities of oil components in ethanol were much higher than those in methanol.     

New sesquiterpenes fromMaytenus species (Celastraceae). Taxonomic and chemotaxonomic considerations concerning chileanMaytenus

Three new dihydro--agarofuran sesquiterpenes from two species ofMaytenus were isolated and their structures were elucidated by means of¹H and¹³C NMR studies. The differences and similarities noted in the chemical content of the dihydro--agarofuran sesquiterpenes from the fourMaytenus species from Chile are in line with the taxonomic characterization of these species; their geographical distribution is also given.     

Thermotropic polyester: the influence of the spacer on the physical properties

Thermotropic polyesters prepared from series of 4,4-dihydroxy-,w-diphenoxy alkanes and 4,4-dichloroformyl-,w-diphenoxy alkanes are well known. The substitution of a methylenic spacer by an oxyethylenic spacer in the main chain of these polyesters drastically modifies their physical properties, particularly the mesogenic transition temperatures, as can be observed by DSC and thermooptical analysis. The thermal stability and the polymer solubility in common organic solvents of these polymers did not show a significant change. The physical properties of the two thermotropic polyesters prepared in diphenyl ether were evaluated.     

Investigation of Flow Patterns in Continuous‐flow Stirred Vessels by Laser Doppler Velocimetry

The flow structure of a continuous‐flow reactor stirred by a Rushton turbine was investigated by laser Doppler velocimetry for two different mean residence time‐mixing time ratios. Velocity measurements were obtained for two inlet locations, corresponding to the incoming liquid stream being fed co‐currently or counter‐currently to the flow discharged by the turbine. In all investigated configurations and for all operating conditions, it was found that the flow disruption caused by the incoming liquid stream was observable mainly in the first vessel quarter, which followed the feed‐tube plane. From comparison of the velocities encountered in the various planes in the continuous‐flow reactor to the velocities of the batch reactor, it was also concluded that it may be possible to intensify the usage of the turbine‐stirred vessel by decreasing the characteristic times ratio, without considerable flow by‐pass and/or short‐circuiting problems.     

Invariant three- and four-phase equilibria in the magnesium-rich corner of the Mg-Cu-Sn ternary system

Invariant three- and four-phase equilibria in the magnesium-rich corner of the Mg-Cu-Sn ternary system have been studied by differential thermal analysis, optical microscopy, electron probe microanalysis and X-ray diffraction. The L(Mg) + Mg₂ Cu + Mg₂Sn ternary eutectic reaction was found to be at 467 °C and at Mg–13.5 at % Cu–4.4 at% Sn. The LMg₂Cu + Mg₂Sn pseudo-binary eutectic reaction is tentatively located at 522°C and at Mg–26.0 at % Cu–7.7 at % Sn.     

Fusion of smartphone sensor data for classification of daily user activities

Multimedia Tools and Applications - New mobile applications need to estimate user activities by using sensor data provided by smart wearable devices and deliver context-aware solutions to users...     

Transmission electron microscopy study of extended defect evolution and amorphization in SiC under Si ion irradiation

The damage induced in 3C-SiC epilayers on a silicon wafer by 2.3-MeV Si ion irradiation for fluences of 10¹⁴, 10¹⁵, and 10¹⁶ cm⁻², was studied by conventional and high-resolution transmission electron microscopy (TEM/HRTEM). The evolution of extended defects and lattice disorder is followed in both the 3C-SiC film and Si substrate as a function of ion fluence, with reference to previous FTIR spectroscopy data. The likelihood of athermal unfaulting of native stacking faults by point defect migration to the native stacking faults is discussed in relation to damage recovery. Threshold energy densities and irradiation doses for dislocation loop formation and amorphous phase transformation are deduced from the damage depth profile by nuclear collisions. The role of electronic excitations on the damage recovery at high fluence is also addressed for both SiC and Si.