Efficacy and stability of ammoniation process as aflatoxin B1 decontamination technology in rice

Rice, a cereal widely used in Venezuela for human and animal nutrition, is susceptible to aflatoxin contamination in the field and during storage. Therefore, the goal of this research was the evaluation of the efficacy and permanence of the ammoniation process through high pressure/high temperature (HP/HT) and atmospheric pressure/moderate temperature (AP/MT) conditions applied to rice samples artificially contaminated with aflatoxin B1. For this purpose a 2k design was drawn up considering the temperature, the rice moisture and the process time as variables. Under both sets of conditions, aflatoxin B1 concentration was reduced in a range of 90% to 100%. After in vitro stomach digestion simulation, toxin reversion ranged from 0% to 19%. In conclusion, the process efficacy and permanence were achieved through the use of high temperature and long process time for both sets of conditions (HP/HT and AP/MT), respectively.     

Catalysis with Soluble Hybrids of Highly Branched Macromolecules with Palladium Nanoparticles in a Continuously Operated Membrane Reactor

The continuous recovery and recycling of soluble metal nanoparticles by means of ultrafiltration is described, employing hybrids of palladium nanoparticles with highly branched amphiphilic polyglycerol as a catalyst for cyclohexene hydrogenation as a model reaction. In a continuously operated membrane reactor a productivity of 29000 TO over 30 exchanged reactor volumes was observed for nanoparticles of 2.2 nm size, with a maximum rate of 1200 TO h⁻¹. Catalysis by soluble metal complexes can be excluded. After 30 hours of operation, some decrease in activity is observed which is due to deposition of palladium on the ultrafiltration membrane, however this material does not contribute to catalytic activity.     

Resolving Confusion Surrounding d-Ala-d-Ala Ligase Catalysis in Cyanobacterial Mycosporine-Like Amino Acid (MAA) Biosynthesis

Mycosporine-like amino acids (MAAs) are natural UV-absorbing sunscreens that evolved in cyanobacteria and algae to palliate harmful effects from obligatory exposure to solar radiation. Multiple lines of evidence prove that in cyanobacteria all MAAs are derived from mycosporine-glycine, which is typically modified by an ATP-dependent ligase encoded by the gene mysD. The function of the mysD ligase has been experimentally described but haphazardly named based solely upon sequence similarity to the d -alanine-d -alanine ligase of bacterial peptidoglycan biosynthesis. Combining phylogeny and alpha-fold tertiary protein structure prediction unambiguously distinguished mysD from d -alanine-d -alanine ligase. The renaming of mysD to mycosporine-glycine-amine ligase (MG-amine ligase) using recognised enzymology rules of nomenclature is, therefore, proposed, and considers relaxed specificity for several different amino acid substrates. The evolutionary and ecological context of MG-amine ligase catalysis merits wider appreciation especially when considering exploiting cyanobacteria for biotechnology, for example, producing mixtures of MAAs with enhanced optical or antioxidant properties.     

Development of stabilized zirconia–alkali salts dual membranes for carbon dioxide capture

Molten Na₂CO₃–K₂CO₃ (NKC, 56–44 mol%) eutectic compositions were vacuum-impregnated, at the eutectic temperature, into two porous ZrO₂:8.6 mol% MgO (magnesium-partially stabilized zirconia, MgPSZ) and ZrO₂:8 mol% Y₂O₂ (yttria-fully stabilized zirconia, 8YSZ) ceramics. Thermogravimetric analyses were performed in mixtures of that composition with MgPSZ and 8YSZ ceramic powders. Before impregnation, porosity was achieved in the two compounds by addition and thermal removal of 30 vol.% NKC. To ascertain the carbonates had filled up through the ceramic body, both sides of the parallel and fracture surfaces of the disk-shaped impregnated compositions were observed in a scanning electron microscope and analyzed by energy-dispersive X-ray spectroscopy. The electrical conductivity of the two ceramics, before and after impregnation, was evaluated by electrochemical impedance spectroscopy in the 5 Hz–13 MHz frequency range from approximately 530 to 740°C. The permeation of the carbonate ions through the membranes via the eutectic composition was assessed by the threshold temperatures of the onset of the carbonate ion percolation. The objectives were to prepare dual-phase membranes for the separation of carbon dioxide and for the development of carbon dioxide sensors.     

Hydrophobization of hair to improve the interfacial adhesion between hair and high-density polyethylene

Concerned about environmental pollution, and aware of the comfort that polyethylene provides for daily human life, this work sought to replace a percentage of high-density polyethylene (HDPE) with human or bovine hair. Hair is natural, abundant, light weight, non-toxic, and disposed of as garbage. The main disadvantage of natural composites is the interfacial adhesion. To increase the interfacial adhesion between hair and HDPE, stearic acid or oleic acid was chemically anchored on the hair surface, which leads to an improved contact angle hysteresis and hydrophobicity. Dynamic-mechanical properties of the composites were investigated focusing on the type of carboxylic acid used (stearic or oleic acid), hair length, hair type (human or bovine) and amount of hair used in the composite. Taking 40°C as a reference, using 15% of hair with a length of 1 ± 0.15 mm, the highest storage modulus value was obtained with HDPE with human hair modified with oleic acid, exceeding the value of the storage modulus of HDPE by 67.64%. Increasing storage modulus on composites indicates of interfacial interaction and chemical affinity improvement between hair and polyethylene.     

Effect of Maleic‐Anhydride Grafting on the Physical and Mechanical Properties of Poly(L‐lactic acid)/Starch Blends

MA is grafted onto both PLLA and starch in an internal mixer in the presence of DCP in a one‐step reactive compatibilization process. The effect of maleation of MA on the physical and mechanical properties and morphology of the blends was assessed. The onset decomposition temperature of the PLLA/starch blends decreased as the starch content increases due to the lower thermal stability of starch and the low effect of the maleation reaction on the thermal stability of the blends. PLLA/starch blends without grafted MA showed higher crystallinity as the starch content increased. Reactive compatibilized blends with less than 20 wt% starch had higher storage modulus, indicating that the compatibility between the two phases was improved.

     

Rubber Particles from Tires Out of Use as Toughness Modifiers of Epoxy-Based Thermosets

Rubber particles from tires out of use (TOU) were used to modify an epoxy-based thermoset. The effect of size and particle content were evaluated. Three bending point and Charpy tests were carried out to study the mechanical behavior of the materials. A steady decrease in the critical stress intensity factor, K_Ic, with the content of TOU was observed, being attributed to the fact that the particles might also act as defects in the polymer matrix. Fractographic analysis confirmed that filled specimens showed localized shear yielding at the end of the particles along the crack propagation direction. No signs of cavitation mechanism were found on the surfaces of fracture, evidencing an extraordinary interfacial adhesion. The total energy absorbed at break increased as the size of TOU particles decreased, pointing out that particle size is crucial for the performance of these materials. Matrix yielding and plastic deformation were considered to be the main toughness mechanisms.     

LINEAR PI TEMPERATURE-CONCENTRATION CASCADE CONTROL FOR TUBULAR REACTORS

In this article we explore the application of linear PI cascade control schemes to improve the performance of industrial PI/PID controllers for controlling outlet reactor concentration. By departing from simple I/O first-order dynamical models obtained from step responses, it is shown that the incorporation of a secondary loop for regulating the reactor temperature at a given interior position significantly improves the control performance in the face of feed composition and temperature disturbances. The effects of the temperature sensor location and the usage of multiple temperature measurements are also evaluated.