Rubber Particles from Tires Out of Use as Toughness Modifiers of Epoxy-Based Thermosets

Rubber particles from tires out of use (TOU) were used to modify an epoxy-based thermoset. The effect of size and particle content were evaluated. Three bending point and Charpy tests were carried out to study the mechanical behavior of the materials. A steady decrease in the critical stress intensity factor, K_Ic, with the content of TOU was observed, being attributed to the fact that the particles might also act as defects in the polymer matrix. Fractographic analysis confirmed that filled specimens showed localized shear yielding at the end of the particles along the crack propagation direction. No signs of cavitation mechanism were found on the surfaces of fracture, evidencing an extraordinary interfacial adhesion. The total energy absorbed at break increased as the size of TOU particles decreased, pointing out that particle size is crucial for the performance of these materials. Matrix yielding and plastic deformation were considered to be the main toughness mechanisms.     

LINEAR PI TEMPERATURE-CONCENTRATION CASCADE CONTROL FOR TUBULAR REACTORS

In this article we explore the application of linear PI cascade control schemes to improve the performance of industrial PI/PID controllers for controlling outlet reactor concentration. By departing from simple I/O first-order dynamical models obtained from step responses, it is shown that the incorporation of a secondary loop for regulating the reactor temperature at a given interior position significantly improves the control performance in the face of feed composition and temperature disturbances. The effects of the temperature sensor location and the usage of multiple temperature measurements are also evaluated.     

Enhanced microbial oil production by activated sludge microorganisms via co‐fermentation of glucose and xylose

The co‐fermentation of glucose and xylose by activated sludge microorganisms for the production of microbial oils for use as biodiesel feedstock was investigated. Various carbon sources at initial concentration of 60 g/L and C:N ratio 70:1 were investigated: xylose, glucose, and 2:1 and 1:2 (by mass) glucose/xylose mixtures. Oil accumulation ranged between 12 to 22% CDW, the highest of which was obtained when xylose was the sole substrate used. Kinetic modeling of the fermentation data showed that specific growth and oil accumulation rates were similar in all substrate types and the lipid coefficient ranged from 0.02 to 0.06 g/g of sugar consumed. The fatty acid methyl ester yield and composition of the lipids showed their suitability for conversion to biodiesel. Based on the results, lignocellulose sugars could be used as fermentation substrates by activated sludge microorganisms for enhancing the oil content of sewage sludge for its use as a sustainable biofuel feedstock source. © 2013 American Institute of Chemical Engineers AIChE J, 59: 4036–4044, 2013     

Study,Mechanical Characterization and Mathematical Modeling of Compatible SEBS Blends for Industrial Applications in Orthopedics and Childcare

In this work, a system of compatible blends based on two commercial grades of a thermoplastic elastomer, styrene-ethylene/butylene-styrene (SEBS), with extreme Shore A hardness values (5 and 90), was studied in order to obtain a range of different performance blends for orthopedic and childcare applications, where usually liquid silicone rubber is used. Mechanical properties of different blends were obtained, and Equivalent Box Model (EBM) was used for the prediction of the mechanical behavior. The results show good agreement between the theoretical model and experimental data of new blends of SEBS.     

Internal Mass Transfer during Isothermal Drying of a Porous Solid Containing Multicomponent Liquid Mixtures

Abstract

Internal mass transfer in a porous solid partially saturated with multicomponent liquids has been experimentally and theoretically studied. Isothermal drying experiments were performed using a jacketed wind tunnel where the transient composition profiles and total liquid content of a cylindrical sample were determined. Sand samples wetted with the ternary liquid mixtures water-methanol-ethanol and 2-propanol-methanol-ethanol were dried at two different initial compositions and temperatures. A mathematical model including mass transfer by capillary movement of the liquid and interactive diffusion in both gas and liquid phase was developed. To simulate the capillary movement of liquid mixtures, parameters experimentally determined for single liquids where weighed according to liquid composition. A fairly good agreement between theoretical and experimental liquid composition profiles was obtained provided that axial dispersion is included in the model.     

Experimental Study on Electrostatically Enhanced Granular Filters

Filtration of charged aerosols by granular bed filters enhanced by an externally applied electrostatic field was studied experimentally. The filtration efficiencies of latex aerosols by sand beds were measured for various aerosol and bed granule diameters. The results were compared with theoretical solutions. It was demonstrated that high filtration efficiencies of charged aerosols may be achieved when moderate electrostatic fields are applied to a filter.     

Up-Regulation of mRNA Ventricular PRNP Prion Protein Gene Expression in Air Pollution Highly Exposed Young Urbanites: Endoplasmic Reticulum Stress,Glucose Regulated Protein 78, and Nanosized Particles

Mexico City Metropolitan Area children and young adults exposed to high concentrations of air pollutants including fine and ultrafine particulate matter (PM) vs. clean air controls, exhibit myocardial inflammation and inflammasome activation with a differential right and left ventricular expression of key inflammatory genes and inflammasomes. We investigated the mRNA expression levels of the prion protein gene PRNP, which plays an important role in the protection against oxidative stress and metal toxicity, and the glucose regulated protein 78, a key protein in endoplasmic reticulum (ER) stress signaling, in ventricular autopsy samples from 30 children and young adults age 19.97 ± 6.8 years with a lifetime of low (n:4) vs. high (n:26) air pollution exposures. Light microscopy and transmission electron microscopy studies were carried out in human ventricles, and electron microscopy studies were also done in 5 young, highly exposed Mexico City dogs. There was significant left ventricular PRNP and bi-ventricular GRP78 mRNA up-regulation in Mexico City young urbanites vs. controls. PRNP up-regulation in the left ventricle was significantly different from the right, p < 0.0001, and there was a strong left ventricular PRNP and GRP78 correlation (p = 0.0005). Marked abnormalities in capillary endothelial cells, numerous nanosized particles in myocardial ER and in abnormal mitochondria characterized the highly exposed ventricles. Early and sustained cardiac ER stress could result in detrimental irreversible consequences in urban children, and while highly complex systems maintain myocardial homeostasis, failure to compensate for chronic myocardial inflammation, oxidative and ER stress, and particles damaging myocardial organelles may prime the development of pathophysiological cardiovascular states in young urbanites. Nanosized PM could play a key cardiac myocyte toxicity role.     

Hydroconversion kinetics of Marlim vacuum residue

A kinetic model was obtained for the Marlim crude vacuum residue (VR) hydroconversion. Marlim VR mixed with FCC decant oil in an 80%/20% weight basis was put in contact with a commercial NiMo on γ-alumina catalyst in a stirred batch reactor. Several temperatures and oil/catalyst ratios were used over different times (0–240 min), at a 110 bar pressure and constant hydrogen flow. The analysis of the collected product showed residua conversions of up to 70%. Hydroconversion kinetics involving thermal and catalytic cracking contributions was proposed to represent the obtained data. The resulting system of differential equations of the kinetic model was solved within reaction time, taking into account the experimental temperature profile. The chi-square objective function was minimized to adjust model parameters. A proposed effective hybrid minimization method was used, by applying a Newton-type method between certain simulated annealing minimization steps. The proposed kinetic model allowed the representation of thermal and catalytic cracking effects, in order to take into account different catalyst concentrations. Therefore it is possible to consider distinct reactor hydrodynamics, such as expanded or bubble column reactors.