Antioxidant activity,color chromaticity coordinates,and chemical characterization of monofloral honeys from Morocco

The bioprospecting of several monofloral Moroccan honeys was carried out. The antiradical activity expressed as mmol Trolox equivalents/kg of honey and evaluated by 2,2-diphenyl-1-picrylhydrazyl assay, ranged from 0.15 for euphorb honey to 1.08 for citrus honey. The antioxidant activity expressed as mmol Fe²⁺/kg and evaluated by ferric ion reducing antioxidant power assay, ranged from 0.96 for euphorb honey to 4.74 for orange honey. The total phenol content was evaluated by colorimetric assay, while the color attributes were evaluated as transmittance data. Significant Pearson correlation factors were found between total polyphenol amount and antioxidant activity and between color attributes and antioxidant activity. Furthermore the chemical composition of volatile organic compounds was determined. The volatile organic compounds chemical composition of the studied honeys was mainly represented by terpene and benzene derivatives, Maillard reaction products, isoprenoids, and hydrocarbons. The volatiles fingerprint, as well as a targeted high-performance liquid chromatography analysis of the polar components, was used to tentatively confirm the declared botanical origin of the samples studied.     

Electrical double-layer capacitors: evaluation of ageing phenomena during cycle life testing

This paper represents an assessment of the main ageing phenomena in electrical double-layer capacitors (EDLCs). In this study the cycle life of the EDLC cells with a rated capacitance of 1,600 F has been investigated at different ambient temperatures and current rates. From the experimental results we can observe that the impact of the high ambient temperature is significant on the cycle life of the cells. Moreover, the results also show the negative impact of the current rate. The internal resistance tests showed that the increase of the resistance is much higher than the decrease of the capacitance. Thus, the ageing of the EDLC during cycling was clearly non-linear. Further the EIS measurements indicated the higher increase of the imaginary part of the impedance at low frequencies during cycling, which indicates the capacitance fade.     

Structural Characterization of Oat Bran (1→3), (1→4)-β-D-Glucans by Lichenase Hydrolysis Through High-Performance Anion Exchange Chromatography with Pulsed Amperometric Detection

Cereal mixed linkages (1 → 3) (1 → 4)-β-D-glucan is a linear polysaccharide composed of glucose units. Oat β-glucan is a natural polymer. The main products of β-glucanase are oligosaccharides with DP3 and DP4, i.e., 3-Ob-cellobiosyl-D-glucose and 3-Ob-cellotriosyl-D-glucose, which represent over 90% of the molecule. Keeping in mind all the benefits of oat bran, the present study was planned to investigate the structural properties of oat bran, high-performance anion exchange chromatography with pulsed amperometric detection was used to examine these oligosaccharides. The structural analysis of oat bran of two oat varieties revealed that the ratio of soluble and insoluble triose to tetraose in β-glucan fraction was 1.44 and 1.78, respectively, for Avon variety; while the ratio of soluble and insoluble triose to tetraose in β-glucan fraction for Sargodha-81 was 1.49 and 1.77. The major units determined were cellotriose and cellotetraose. Other units cellopentaose and hexaoses were also existed but in minor fractions. Lichenase hydrolysis high-performance anion exchange chromatography with pulsed amperometric detection appeared to be the best choice for structural analysis of purified samples of mixed-linkage β-glucan.     

Explaining the Difference Between Real Part and Virtual Design of 3D Printed Porous Polymer at the Microstructural Level

The combination of experimental and numerical approaches is attempted to shed more light on 3D microstructural imperfections and mechanical performance of 3D printed acrylonitrile butadiene styrene parts. The starting point is the virtual building of airy structures using a reverse engineering approach. This approach combines microstructure generator, finite element model, and optimization strategy to propose virtual airy structures satisfying structural and mechanical criteria up to a desired porosity content of 60%. Optimal structures are printed using fused deposition modeling and X‐ray microtomography is used to assess all microstructural defects. Compression testing is performed for load levels above 50% of reduction in sample height. The main outcome of this work is the demonstration of small amount of process induced porosity inducing high pore connectivity. The interdependence of process induced and desired porosity reveals genuine microstructural effects that are only characteristics of 3D printed materials.

     

COSMO-RS:An ionic liquid prescreening tool for gas hydrate mitigation

Recently ionic liquids(ILs) are introduced as novel dual function gas hydrate inhibitors. However, no desired gas hydrate inhibition has been reported due to poor IL selection and/or tuning method. Trial error as well as selection based on existing literature are the methods currently employed for selecting and/or tuning ILs. These methods are probabilistic, time consuming, expensive and may not result in selecting high performance ILs for gas hydrate mitigation. In this work, COSMO-RS is considered as a prescreening tool of ILs for gas hydrate mitigation by predicting the hydrogen bonding energies(E_(HB)) of studied IL inhibitors and comparing the predicted E_(HB) to the depression temperature(?) and induction time. Results show that, predicted EHBand chain length of ILs strongly relate and significantly affect the gas hydrate inhibition depression temperature but correlate moderately(R = 0.70) with average induction time in literature. It is deduced from the results that, ? increases with increasing IL EHBand/or decreases with increasing chain length. However, the cation–anion pairing of ILs also affects IL gas hydrate inhibition performance. Furthermore, a visual and better understanding of IL/water behavior for gas hydrate inhibition in terms of hydrogen bond donor and acceptor interaction analysis is also presented by determining the sigma profile and sigma potential of studied IL cations and anions used for gas hydrate mitigation for easy IL selection.     

Effects of additives on oxidation characteristics of palm oil‐based trimethylolpropane ester in hydraulics applications

Hydraulic fluids represent one of the most important groups of industrial lubricants. Increasing attention to environmental issues drives the lubricant industry to choose vegetable‐based hydraulic fluids which are biodegradable as compared to mineral‐based fluids. However, the lubricating properties of vegetable oil, such as poor oxidative stability and high pour point, have hindered their use. In this study, trimethylolpropane ester, which was derived from palm‐based methyl ester, was used as the base hydraulic fluid. The purpose of the study was to determine the optimum formulation for palm oil‐based synthetic lubricants by using suitable additives that can improve the oxidative stability and viscosity in accordance with the standard regulations for hydraulic fluid applications. The oxidative stability of the oil was evaluated by total acid number (TAN) and viscosity tests. In general, base oil without additive began to degrade after 200 h. The formulated oil, on the other hand, was quite stable even after 800 h of operation. The best formulation was obtained using 1.0% of either additive A or additive B. Both TAN and viscosity values were found to increase with increasing heating temperature. Meanwhile, the results have also shown that additive A performs better than additive B. After 800 h of exposure, the final TAN value for the formulated oil was only at 0.32 as compared to 4.88 mg KOH/g for the oil without additive. However, the kinematic viscosity of the oil at 40 and 100 °C was almost unchanged as compared to the oil without additive.     

Four energy group neutron flux distributions in the Syrian Miniature Neutron Source Reactor using the WIMSD4 and CITATION codes

A 3-D (R, θ, Z) neutronic model for the Miniature Neutron Source Reactor (MNSR) was developed earlier to conduct the reactor neutronic analysis. The group constants for all the reactor components were generated using the WIMSD4 code. The reactor excess reactivity and the four group neutron flux distributions were calculated using the CITATION code. This model is used in this paper to calculate the pointwise four energy group neutron flux distributions in the MNSR versus the radius, angle and reactor axial directions. Good agreement is noticed between the measured and the calculated thermal neutron flux in the inner and the outer irradiation sites with relative differences less than 7% and 5%, respectively.     

In Vitro Angiogenic Behavior of HUVECs on Biomimetic SF/SA Composite Scaffolds

The 60Fc and 70Fc SF/SA blend scaffolds were prepared to mimic the functions of the native ECM for skin regeneration.Human Umbilical Vein Endothelial Cells (HUVECs) were used to examine the cell cytotoxicity,adhesion,growth factors secretion and the gene expression of associated angiogenic factors.Cell proliferation,adhesion and live-dead analyses showed that HUVECs could better attach,grow,and proliferate on the 70Fc scaffolds compared with 60Fc scaffolds and unmodified controls.Furthermore,the 70Fc scaffolds showed higher levels of specific angiogenic proteins and genes expression as well.This study suggests that the involvement of higher composition of SF (about 70%) than that of SA on the blended scaffolds could be advantageous as it is more suitable to promote angiogenesis,which is potential for vascularization during skin repair.     

Radio resource management for LTE-A relay-enhanced cells with spatial reuse and max–min fairness

One of the major issues in LTE-Advanced (LTE-A) systems is the poor capacity at the cell edge. This is mainly due to the interference experienced by the users as a result of the aggressive frequency reuse usually implemented. Relaying offers an attractive solution for this problem by offering better links than those with the eNodeB (eNB) for the terminals suffering from high path loss or high interference. However, adding relays complicates the resource allocation problem at the eNB and therefore the need for more efficient schemes arises. This is also aggravated by the reuse of resource blocks (RBs) by the relays to fully exploit the scarce spectrum, which, in turn, leads to intra-cell interference. In this paper, we study the joint power and resource allocation problem in LTE-A relay-enhanced cells that exploit spatial reuse. To guarantee fairness among users, a max–min fair optimization objective is used. This complex problem is solved using coordinate ascent and the difference of two convex functions (DC) programming techniques and the proposed scheme indeed converges to a local-optimum quickly. This is shown to be a satisfactory solution according to the simulation results that indicate an almost sevenfold increase in the 10th percentile capacity when compared to previously proposed solutions.