Selection of sampling points for accurate evaluation of flatness error using coordinate measuring machine

Dimensional inspection, in integrated manufacturing environments, requires accurate inspection while minimizing the cost and time of inspection. The selection of sampling plan—sample size and sample point locations, the method of evaluating the form error and the nature of the manufactured surfaces will play an important role in deciding the best inspection strategy to be adopted. This paper deals with the strategy for evaluation of flatness error which is one of the most commonly used form tolerances for control of manufactured surfaces. Investigations have been carried out to ascertain the influence of surface quality (surface roughness) in determining the sampling strategy for accurate determination of flatness error while inspecting on a coordinate measuring machine (CMM). The sampling plan utilizes the Hammersley sequence for point location and the flatness error is evaluated using the minimum zone method (MZM) based on computational geometry techniques. Results indicate that the surface roughness influences the accuracy of inspection and can be used as a parameter for determining an initial sample size for the determination of flatness error.     

Identification of beta-L-gulose as the sugar moiety of the main polar lipid Thermoplasma acidophilum

We studied the antibody binding capacity (ABC) of various cell-surface antigens in normal human fetuses and term neonates on lymphocyte, monocyte, and polymorphonuclear (PMN) cells by quantitative flow cytometry also designated by quantimetry. Analysis of changes of expression level on these leukocytes during the developmental process was also investigated. The results indicated that the ABC values of most studied markers change during the maturational process. The ABC of lymphocyte-associated antigens studied such as CD5 and CD7 showed only a decrease from fetus to adult, whereas according to the type of molecule on monocyte and PMN there was either an increase or a decrease of ABC values dependent on the stage of the developmental process, from fetus to neonate or from neonate to adult. However, the ABC values of leukocyte membrane antigens such as CD16, CD46, and CD55 on all leukocytes and CD11b, CD11c, and CD35 on myeloid cells did not change. Their expression level was already mature in fetuses compared with adult cells. In addition, in this quantimetric approach, the analysis of the results for CD11a and CD8 suggested that the changes of CD11a expression level on lymphocyte subsets can depend on one mechanism, whereas there are probably at least two for CD8. Furthermore, the expression patterns of CD5, CD7, and CD11a change during maturation. We concluded that, even if the neonate response pattern to immunological challenge differs from an adult and this is based primarily on the relative numbers and functional activity of lymphocyte T subsets (especially TH1/TH2) and their cytokine profiles, these quantitative and qualitative phenotypical differences might also contribute to explain the functional peculiarities of leukocyte fetal and cord blood cells. All these findings support the notion of immaturity and maturity of ABC expression.     

Epidemic Simulation for Training in Public Health Management

Epidemiological simulation models to be used primarily to augment the teaching of epidemiology to medical students and other individuals concerned with public health and control of epidemics are presented. Interactive simulations are used to expose students to ``realistic' epidemic situations and permit them to experiment with various control strategies. Criteria by which simulations for such teaching purposes may be evaluated are proposed and operating simulations, MEASLES and INFLU, are described in detail. Information is provided regarding user experience with the above simulations.     

Oils from perennial gourds

Summary The seeds and the oil from the seeds of two perennial gourds,Cucurbita palmata andCucurbita digitata, which grow wild in the Southwestern States, have been examined. Approximately two-thirds, by weight, of the whole dried fruit is seeds. The seeds contain about 28–30% oil and somewhat higher percentages of protein. The oils from both species are chiefly characterized by 10.0 to 17.0% of a conjugated trienoic acid similar to the eleostearic acid of tung oil, but apparently not identical with it. Analytical data are shown pertaining to the whole seeds as well as the oil extracted from them. Presented at the 38th Annual Meeting of the American Oil Chemists' Society, New Orleans, La., May 20–22, 1947. One of the laboratories of the Bureau of Agricultural and Industrial Chemistry, Agricultural Research Administration, U. S. Department of Agriculture.     

CFD analysis of natural convection heat transfer augmentation from square conductive horizontal and inclined pin fin arrays

Numerical investigations on natural convection heat transfer from a vertical isothermal plate with pin fins have been made by solving the Navier–Stokes equation along with the energy equation. Average Nusselt number for the plate with different configurations of pin fins have been obtained. It was observed that the maximum increase of the average Nusselt number occurs at S_v/L?=?0.2 for θ?=?45° with fin height of 24?mm (H/t?=?8). The average Nusselt number increases with fin aspect ratio and decreases with angle of inclination. There is not much difference between the average Nusselt number for in-line and staggered arrangement of fins for the range of parameters studied in the present work. A correlation is developed to predict the average Nusselt number of the plate as a function of fin spacing in stream- and span-wise direction, aspect ratio of fins and its angle of inclination.     

Analysis of Chemical Bonding and Structural Network of Gold Silicide in Core–Shell Silicon Nanowire

The Au-catalyzed core–shell silicon nanowires (Si-NWs) were synthesized by chemical vapor deposition by using SiH₄ and H₂ precursor gases. The TEM and FTIR studies revealed that the Si-NWs consist of core silicon surrounded by a thick oxide sheath and Au distributed at the a-SiOx/Si interface. The x-ray photoelectron spectroscopy (XPS) was used to study the chemical composition and electronic environments of gold silicide in the a-SiO _x /Si-NWs. The elemental analysis and chemical network of gold silicide of core–shell Si-NWs were explained on the basis of the random atomic distribution of Si, O and Au atoms. The Raman spectra and XRD peak reveal the crystalline core of Si-NWs. The individual contribution to the Au (4d) core orbital was deconvoluted to Au-Si-Au, Au-Si-O, Au-Au, Au-O-Au, Au-O-Si and Au=O/Au-O₂ bonding structure. The analysis shows that the O linked with Si and Au has also contributed to growth of Si-NWs.     

Preparation of thermal resistant gas barrier chitosan nanobiocomposites

Nanobiocomposites of chitosan/clay were prepared by solution method using CuSO₄/glycine chelate complex as the catalyst with variable percentage of clay loading. The chemical interaction of chitosan and clay was studied by Fourier transform infrared spectroscopy. The structure of chitosan and clay nanobiocomposites was investigated by X‐ray diffraction and high resolution transmission electron microscopy. From thermogravimetric analysis, it was found that chitosan/clay nanobiocomposites were more thermally stable as compared to pure chitosan. A substantial reduction in oxygen permeability was obtained from the gas permeameter with increase in clay concentrations by which the synthesized nanocomposites materials may be used for packaging applications. POLYM. COMPOS., 35:2324–2328, 2014. © 2014 Society of Plastics Engineers     

Semiclosed-Cell Mullite Foams: Preparation and Macro- and Micromechanical Characterization

The preparation and characterization of the properties of mullite ceramic foams suitable for diesel exhaust filtration systems are described. Two foams of different cell sizes, 32 and 61 ppi (pores per inch), were prepared from slurries by the replication process with polyurethane sponges as the templates. The microstructure and the dependence of the porosity and the mechanical properties on the preparation and resulting foam cell size and normalized density are discussed. In addition the micro- and macromechanical properties have been characterized using instrumented indentation techniques; with sharp (Berkovich) and small spherical-tipped indenters the hardness and modulus of the dense strut materials have been measured. The macroproperties have been measured with a large sapphire indenter, ∼5 mm radius using a load partial-unloading technique. The latter enables the modulus and the contact pressure versus penetration to be measured. These values are compared with traditional bulk measurements for crushing strength and elastic modulus. The results are discussed in terms of available theoretical treatments of the indentation of brittle porous materials.