Micromorphology,pharmacognosy, and bio‐elemental analysis of an important medicinal herb: Verbascum thapsus L.

The present study was conducted on characterization of morpho‐anatomical, phytochemical, and bio‐elemental analysis of root, stem, and leaf of Verbascum thapsus. Morphologically Verbascum is a biennial plant that flowers for a month and a half in mid‐ to late summer. Various organoleptic features of root, leaf, and stem were recorded. Anatomically the T. S of the root, stem, and leaf showed a typical dicot histological differentiation. Leaf possessed anomocytic stomata, crescent shape vascular bundles, and covered with long and stellate type trichomes while, stem contained collateral type of vascular bundles and a well‐developed pith to store phytochemicals responsible for various pharmacological activities. The powder drug study through scanning electron microscopy revealed the presence of various types of tissues. Branched, tree like and stellate trichomes in root and leaf help in absorption and reduce loss of water. These anatomical features are responsible for the survival of the plant as biennial. Four macro elements (Na, K, Ca, and Mg) and seven microelements (Cr, Cu, Fe, Mn, Ni, Zn, and Cd) and their concentrations in ppm were also studied using Atomic Absorption Spectroscopy. Phytochemical screening of methanolic extract showed existence of various secondary metabolites, while mucilage and anthraquinones was not detected. The present study helps to understand the taxonomic identification of the plant based on morpho‐anatomical features and throws the attention of the researchers to carry out the work for developing its various formulations, which can ultimately be beneficial for the human beings as well as animals.     

Laser cutting of 7050 Al alloy reinforced with Al2O3 and B4C composites

In the present study, laser cutting of 7050 aluminum alloy sheets reinforced with Al₂O₃ and B₄C particles are carried out. The cut geometry is examined using scanning electron microscope and the optical microscope. The lump parameter analysis technique is used to formulate and determine the kerf width size. The predictions for kerf width are compared with experimental data. The percentage kerf width size variation along the cut edges is determined and the influence of the laser power level and duty cycle of the laser pulses on the percentage kerf width size variation is examined. It is found that 7050 aluminum alloy reinforced with 20% Al₂O₃ composite results in relatively large kerf width size as compared to its counter parts that corresponding to 7050 aluminum alloy reinforced with 20% B₄C composite. The kerf width size predicted agreed with the experimental data for both composites.     

Grey relational analysis coupled with principal component analysis for optimisation design of the process parameters in in-feed centreless cylindrical grinding

This paper investigates optimisation design of an in-feed centreless cylindrical grinding process performed on EN52 austenitic valve steel (DIN: X45CrSi93). The major performance characteristics selected to evaluate the process are surface roughness, out of cylindricity of the valve stem and diametral tolerance, and the corresponding centreless cylindrical grinding parameters are dressing feed, grinding feed, dwell time and cycle time. In this study, since the process is with multiple-performance characteristics, therefore, the grey relational analysis that uses grey relational grade as performance index is specially adopted to determine the optimal combination of centreless cylindrical grinding parameters. Moreover, the principal component analysis is applied to evaluate the weighting values corresponding to various performance characteristics so that their relative importance can be properly and objectively described. The results of confirmation experiments reveal that grey relational analysis coupled with principal component analysis can effectively be used to obtain the optimal combination of centreless cylindrical grinding parameters. Hence, this confirms that the proposed approach in this study can be a useful tool to improve the centreless cylindrical grinding performance of valve stem in in-feed centreless cylindrical grinding process.     

Selecting and prioritizing key factors for CAD/CAM software in small- and medium-sized enterprises using AHP

In today’s fast-paced world, computer-aided design/computer-aided manufacturing (CAD/CAM) systems have become a necessary element in manufacturing industries. Prior to investment in a CAD/CAM system, it is essential for investor to know how to maximize their benefits from buying a new or by changing an existing CAD/CAM system. The purpose of this study is to provide a methodology to assist small- and medium-sized manufacturing companies of Pakistan in selecting a CAD/CAM system. It will also facilitate the software providers in recognizing the current state of affairs as well as preceding problems regarding the application of CAD/CAM in manufacturing firms when assisting them in choosing the direction for future development simultaneously. To accomplish this purpose, data have been collected about current CAD/CAM systems. Important criteria for system selection and parameters for evaluation have also been identified and prioritized. Analytic hierarchy process (AHP) is used as a decision-making technique for identifying and prioritizing important factors for CAD/CAM software selection. Expert Choice (AHP-based software) has been used to validate the results.     

Micro‐morphological,environmental and phytochemical investigation of herbal medicines by using LM and SEM: A quality control tool

The use of quality control tool for authentication of Jadwar (Delphinium denudatum Wall. ex Hook.f. & Thomson), a folk herbal drug used for the treatment of different ailments, was studied. People face problems of adulteration for this drug at global, regional, national and local levels. Two different plant species are commercially marketed in the Indo‐Pak Subcontinent under the same trade name of Jadwar. One is D. denudatum Wall. ex Hook.f. & Thomson and the other is Aconitum heterophyllum Wall. ex Royle. To focus on this problem, a marketable available drug sample of Jadwar was authenticated by using basic microscopy tools (LM) and advanced chemo‐taxonomic markers. Authentication, quality and standardization of this drug was achieved using morphology, organoleptography, UV and IR analyses, scanning electron microscopy of pollen and anatomical investigations. The techniques used for authentication marked the clear difference between the studied plants. Microscopic studies, chemotaxonomic investigation and other techniques used in this project provided the basis for the authentication of this species.     

Implication of palynological techniques for the authentication of adulterated drugs traded with the same name in different herbal markets of district Lahore,Pakistan

Adulteration in traded medicinal plants is a significant issue nowadays and use of these adulterated medicinal plants can impose harmful impact to end user. However, this problem can be overcome by ensuring the identification of traded medicinal plants which are used in making different herbal medicines. In this regard, palynological markers are considered to be an important taxonomic tool in the identification of original medicinal plant from its adulterant. Hence this study attempted to provide particular reliable palynological markers for distinguishing selected medicinal plants from their adulterants, that is, Cinnamomum verum versus Canella winterana, Cinnamomum tamala versus Cinnamomum obtusifolium, Gymnema sylvestre versus Gymnema lactiferum, Artemisia maritima versus Artemisia absinthium, Achillea millefolium versus Adhatoda vasaka, Sphaeranthus indicus versus Sphaeranthus africanus, Averrhoa carambola versus Butea monosperma, and Morus nigra versus Morus alba. Results demonstrated great variations in multiple palynological characters between original medicinal plant and its adulterant such as in pollen size, shape, colpi length, exine, intine thickness, and fertility. In equatorial view, circular to spheroidal shape of pollen was found in A. millefolium while oblate shape was observed in A. vasaka. Similarly B. monosperma pollen was 34 μm, whereas pollen of its adulterant A. carambola was 21 μm. Moreover, colpi length of A. maritima was 11.8 μm, whereas 4.5 μm in A. absinthium. Hence it can be concluded that palynological characters are commendably helpful in identification of genuine medicinal plant from its adulterant.     

Plasmodium species aware based quantification of malaria parasitemia in light microscopy thin blood smear

Malaria is a serious worldwide disease, caused by a bite of a female Anopheles mosquito. The parasite transferred into complex life round in which it is grown and reproduces into the human body. The detection and recognition of Plasmodium species are possible and efficient through a process called staining (Giemsa). The staining process slightly colorizes the red blood cells (RBCs) but highlights Plasmodium parasites, white blood cells and artifacts. Giemsa stains nuclei, chromatin in blue tone and RBCs in pink color. It has been reported in numerous studies that manual microscopy is not a trustworthy screening technique when performed by nonexperts. Malaria parasites host in RBCs when it enters the bloodstream. This paper presents segmentation of Plasmodium parasite from the thin blood smear points on region growing and dynamic convolution based filtering algorithm. After segmentation, malaria parasite classified into four Plasmodium species: Plasmodium falciparum, Plasmodium ovale, Plasmodium vivax, and Plasmodium malaria. The random forest and K‐nearest neighbor are used for classification base on local binary pattern and hue saturation value features. The sensitivity for malaria parasitemia (MP) is 96.75% on training and testing of the proposed approach while specificity is 94.59%. Beside these, the comparisons of the two features are added to the proposed work for classification having sensitivity is 83.60% while having specificity is 94.90% through random forest classifier based on local binary pattern feature.     

Morphological and palynological assessment of taxonomically problematic genus Paspalum based on light and scanning electron microscopy

Present research work was carried out to clarify the variations among species of genus Paspalum morphologically and palynologically as this genus is taxonomically difficult due to having multiple similar morphologically overlapping characters which make it difficult to identify. Henceforth present research work was carried out to delimit taxa within the same genus by morphological and palynological tools through light microscopy (LM) and scanning electron microscopy (SEM). Both these tools are considered as the most useful taxonomic characters for taxonomically problematic genera. The results showed a lot of variations among morphological characters. In Paspalum dilatatum, the upper glume was ovate whereas in the other two species, the upper glume was elliptic. The upper glume apex found in P. dilatatum and Paspalum scrobiculatum was obtuse whereas in Paspalum distichum, upper glume apex was acute. Glume nerves showed variation in all three species. Paspalum distichum was 3 nerved, P. scrobiculatum was 5–7 nerved, and P. dilatatum was 5–9 nerved. All three species showed variation in lemma nerves. Paspalum scrobiculatum had 3 nerved lemma whereas in P. distichum 3–5 nerved and P. dilatatum 5–9 nerved lemma were present. In polar and equatorial view, pollen grains ranged from 25 (20–30) to 37.5 (30–45) μm. Paspalum distichum appeared to be the smallest in size whereas P. dilatatum was the largest. Exine thickness ranged from 0.75 (0.5–1) to 1.35 (1.2–1.5) μm. The higher value of pollen fertility was found in P. scrobiculatum as 87.69% and the lowest value was in P. distichum as 78.08%. Morphological keys were also given for correct identification.     

Taxonomic investigation of selected rust fungi using scanning electron microscopy from Khyber Pakhtunkhwa,Pakistan

Rusts comprises the largest natural group of plant pathogens including approximately 8% of all described Fungi. Rust fungi are extremely plant pathogens responsible for great losses to agriculture productivity. Rust species belong to several genera among which more than half are Puccinia species. In Pakistan, rust causes severe damage to agriculture crops. Current study was carried out to identify and characterize different rust species common in the research area through microscopy and Scanning electron microscopy (SEM) in Khyber Pakhtunkhwa, Pakistan. Morpho-anatomical investigation of each collected rust species was carried out using different standard protocols. The dimensions of spores were measured and snapped under a stereomicroscope. SEM was used to examine the shape, size, and ornamentation of the spores of each rust fungus. Results revealed documentation of seven rust fungi, that is, Melampsora euphorbiae, Phragmidium barclayi, Puccinia nepalensis, P. exhausta, P. menthae, Uromyces capitatus, and Uromyces decorates belong to four different genera, were recorded. SEM revealed that spermogonia and Aecia were missing in most of the rust fungus studied. Uredinia was found in a scattered, irregular, lengthy, and epidermis-enclosed form. Urediniospores were found to be ovulating, elongated, echinulate, globose to sub-globose, ellipsoid to ovoid, and globose to sub-globose. Telia was found as sub-epidermal, amphigenous, dispersed, minute, and spherical cells. Teliospores ranged in form from cylindrical to oblong. The germ pores were detected in both apical (top cell) and basal (bottom cell) idiosyncratic and pedicel-attached cells. The techniques used in the current investigation will aid mycologists in rust identification and microscopic characterization.