Reconfigurable MEMS-enabled frequency selective surfaces

A technique for designing reconfigurable frequency selective surfaces using microelectromechanical systems (MEMS) technology is presented. A method of moments simulation technique for analysing these periodic structures has been used to predict the tunability using this technique. Fabricated and measured results verify the concept of tunability.     

Integral equation solution and RCS computation of a thin rectangular plate

In this work, a new integral equation is employed to calculate the current distribution on a rectangular plate which is illuminated by a plane wave. Numerical results are also obtained for the radar cross section (RCS) of the plate for different angles of incidence and different dimensions of the plate. These results are compared with other RCS computations using geometrical theory of diffraction, physical optics, and variational methods.     

Derivation and application of the equivalent paraboloid forclassical offset Cassegrain and Gregorian antennas

The equivalent paraboloid is derived for classical offset Cassegrain and Gregorian antennas. The important practical case of systems with circular exit apertures is discussed in detail, and a condition for a symmetric equivalent paraboloid is derived. For such systems, diffraction effects are investigated using tapered and scanned feeds to illuminate the equivalent paraboloid and the two-reflector system     

RCS characterization of a finite ground plane with perforatedapertures: simulations and measurements

The monostatic radar cross section of a finite-size perfectly conducting flat plate with perforated apertures is investigated by simulations and measurements. The geometry of a finite ground plane with triangular apertures resembles airplane and automobile windows. The method of moments surface patch formulation is used to compute the radar cross section of a solid plate, a plate with two widely spaced apertures, and a plate with two closely spaced apertures. The characteristics of the triangular patch mesh can impact the accuracy of the computed results with this formulation. The paper presents a methodology to achieve high quality meshes to ensure that the time and convenience gained by developing the general method of moments code is not lost in mesh construction and convergence tests. The results obtained using the method of moments are compared with results obtained by measurements and physical optics. It is shown that the method of moments simulations and measurements are in good agreement. The key features of the influence of the aperture separation on the RCS patterns are discussed     

A generalized diffraction synthesis technique for high performancereflector antennas

Stringent requirements on reflector antenna performances in modern applications such as direct broadcast satellite (DBS) communications, radar systems, and radio astronomy have demanded the development of sophisticated synthesis techniques. Presented in the paper is a generalized diffraction synthesis technique for single- and dual-reflector antennas fed by either a single feed or an array feed. High versatility and accuracy are achieved by combining optimization procedures and diffraction analysis such as physical optics (PO) and physical theory of diffraction (PTD). With this technique, one may simultaneously shape the reflector surfaces and adjust the positions, orientations, and excitations of an arbitrarily configured array feed to produce the specified radiation characteristics such as high directivity, contoured patterns, and low sidelobe levels, etc. The shaped reflectors are represented by a set of orthogonal global expansion functions (the Jacobi-Fourier expansion), and are characterized by smooth surfaces, well-defined (superquadric) circumferences, and continuous surface derivatives. The sample applications of contoured beam antenna designs and reflector surface distortion compensation are given to illustrate the effectiveness of this diffraction synthesis technique     

An efficient computational method for characterizing the effects of random surface errors on the average power pattern of reflectors

Based on the works of Ruze and Vu, a novel mathematical model has been developed to determine efficiently the average power pattern degradations caused by random surface errors. In this model, both nonuniform root mean square (rms) surface errors and nonuniform illumination functions are employed. In addition, the model incorporates the dependence onF/Din the construction of the solution. The mathematical foundation of the model rests on the assumption that in each prescribed annular region of the antenna, the geometrical rms surface value is known. It is shown that closed-form expressions can then be derived, which result in a very efficient computational method for the average power pattern. Detailed parametric studies are performed with these expressions to determine the effects of different random errors and illumination tapers on parameters such as gain loss and sidelobe levels. The results clearly demonstrate that as sidelobe levels decrease, their dependence on the surface rms/lambdabecomes much stronger and, for a specified tolerance level, a considerably smaller rms/lambdais required to maintain the low sidelobes within the required bounds.     

Microwave holography of large reflector antennas--Simulation algorithms

The performance of large reflector antennas can be improved by identifying the location and amount of their surface distortions and then by correcting them. Microwave holography techniques are finding considerable applications as viable tools for performing this task. In these techniques, the complex (amplitude and phase) far-field pattern of the antenna is measured, using a reference antenna. Then, the Fourier transform relationship, which exists between the far field and a function related to the induced current, is invoked to result in the identification of the surface distortions. To critically examine the accuracy of the constructed surface profiles, simulation studies are required to incorporate both the effects of systematic and random distortions, particularly the effects of the displaced surface panels. In this paper, different simulation models are investigated with emphasis given to a model based on the vector diffraction analysis of a curved reflector with displaced panels. The simulated far-field patterns are then used to reconstruct the location and amount of displacement of the surface panels by employing a fast Fourier transform (FFT)/iterative procedure. The sensitivity of the microwave holography technique based on the number of far-field sampled points, level of distortions, polarizations, illumination tapers, etc., is also examined. In addition, the relationships between Az-El andu-vspaces are addressed in the Appendix. Most of the data are tailored to the dimensions of the NASA/JPL Deep Space Network (DSN) 64-m reflector antennas for which the result of a recent measurement is also presented.     

Passive active L- and S-band (PALS) microwave sensor for oceansalinity and soil moisture measurements

A passive/active WS-band (PALS) microwave aircraft instrument to measure ocean salinity and soil moisture has been built and tested. Because the L-band brightness temperatures associated with salinity changes are expected to be small, it was necessary to build a very sensitive and stable system. This new instrument has dual-frequency, dual polarization radiometer and radar sensors. The antenna is a high beam efficiency conical horn. The PALS instrument was installed on the NCAR C-130 aircraft and soil moisture measurements were made in support of the Southern Great Plains 1999 experiment in Oklahoma from July 8-14, 1999. Data taken before and after a rainstorm showed significant changes in the brightness temperatures, polarization ratios and radar backscatter, as a function of soil moisture. Salinity measurement missions were flown on July 17-19, 1999, southeast of Norfolk, VA, over the Gulf Stream. The measurements indicated a clear and repeatable salinity signal during these three days, which was in good agreement with the Cape Hatteras ship salinity data. Data were also taken in the open ocean and a small decrease of 0.2 K was measured in the brightness temperature, which corresponded to the salinity increase of 0.4 psu measured by the M/V Oleander vessel     

Wide-band E-shaped patch antennas for wireless communications

This paper presents a novel single-patch wide-band microstrip antenna: the E-shaped patch antenna. Two parallel slots are incorporated into the patch of a microstrip antenna to expand it bandwidth. The wide-band mechanism is explored by investigating the behavior of the currents on the patch. The slot length, width, and position are optimized to achieve a wide bandwidth. The validity of the design concept is demonstrated by two examples with 21.2% and 32.3% bandwidths. Finally, a 30.3% E-shaped patch antenna, resonating at wireless communication frequencies of 1.9 and 2.4 GHz, is designed, fabricated and measured. The radiation pattern and directivity are also presented