Wear of steel in rolling contact with silicon nitride

Wear of steel (AISI M-50 and AISI 52100) bearing balls in lubricated rolling contact with ground and ground-and-lapped silicon nitride rods was studied using a ball-on-rod rolling-contact-fatigue (RCF) tester. The steel balls suffered significant wear in rolling contact with the as-ground (R_a = 0.18 μm) silicon nitride rods. The wear volume loss was approximately linear with the rolling distance. The wear rate increased linearly with the initial Hertzian contact stress in the range, 3–6.5 GPa. Examination of the wear tracks in a scanning electron microscope revealed surface features that suggested a wear mechanism that involved plastic deformation of the steel surface, squeezing of the metal symmetrically outward and rupture of the metal layers at the edges. The steel balls suffered negligible wear but failed by spalling in rolling contact with the ground-and-lapped silicon nitride rods (R_a = 0.08 μm) at an initial contact stress of 5.5 GPa. The as-ground silicon nitride rods exhibited neither wear nor spalling in the RCF tests, while the ground-and-lapped silicon nitride rods showed no wear but occasional spalling failure.     

Immune and Anticancer Responses Elicited by Fully Synthetic Aberrantly Glycosylated MUC1 Tripartite Vaccines Modified by a TLR2 or TLR9 Agonist

The mucin MUC1 is overexpressed and aberrantly glycosylated by many epithelial cancer cells manifested by truncated O‐linked saccharides. Although tumor‐associated MUC1 has generated considerable attention because of its potential for the development of a therapeutic cancer vaccine, it has been difficult to design constructs that consistently induce cytotoxic T‐lymphocytes (CTLs) and ADCC‐mediating antibodies specific for the tumor form of MUC1. We have designed, chemically synthesized, and immunologically examined vaccine candidates each composed of a glycopeptide derived from MUC1, a promiscuous T_helper peptide, and a TLR2 (Pam₃CysSK₄) or TLR9 (CpG‐ODN 1826) agonist. It was found that the Pam₃CysSK₄‐containing compound elicits more potent antigenic and cellular immune responses, resulting in a therapeutic effect in a mouse model of mammary cancer. It is thus shown, for the first time, that the nature of an inbuilt adjuvant of a tripartite vaccine can significantly impact the quality of immune responses elicited against a tumor‐associated glycopeptide. The unique adjuvant properties of Pam₃CysSK₄, which can reduce the suppressive function of regulatory T cells and enhance the cytotoxicity of tumor‐specific CTLs, are likely responsible for the superior properties of the vaccine candidate 1 .     

Active noise control using a distributed mode flat panel loudspeaker

A flat panel distributed mode loudspeaker (DML) has many advantages over traditional cone speakers in terms of its weight, size, and durability. However, its frequency response is uneven and complex, thus bringing its suitability for active noise control (ANC) under question. This paper presents experimental results demonstrating the effective use of panel DML speakers in an ANC application. Both feedback and feedforward control techniques are considered. Effective feedback control with a flat panel speaker could open up a whole range of new noise control applications and has many advantages over feedforward control. The paper develops a new control algorithm to attenuate tonal noise of a known frequency by feedback control. However, due to the uneven response of the speakers, feedback control is found to be only moderately effective even for this narrow-band application. Feedforward control proves to be most capable for the flat panel speaker. Using feedforward control, the sound pressure level can be significantly reduced in close proximity to an error microphone. The paper demonstrates an interesting application of the flat panel in which the panel is placed in the path of sound and effectively used to block sound transmission using feedforward control. This is a new approach to active noise control enabled by the use of flat panels and can be used to prevent sound from entering into an enclosure in the first place rather than the traditional approach of attempting to cancel sound after it enters the enclosure.     

Effect of welding processes on tensile properties of AA6061 aluminium alloy joints

The present investigation is aimed at to study the effect of welding processes such as GTAW, GMAW and FSW on mechanical properties of AA6061 aluminium alloy. The preferred welding processes of these alloys are frequently gas tungsten arc welding (GTAW) and gas metal arc welding (GMAW) due to their comparatively easier applicability and better economy. In this alloy, the weld fusion zones typically exhibit coarse columnar grains because of the prevailing thermal conditions during weld metal solidification. This often causes inferior weld mechanical properties and poor resistance to hot cracking. Friction stir welding (FSW) is a solid phase welding technique developed primarily for welding metals and alloys that heretofore had been difficult to weld using more traditional fusion techniques. Rolled plates of 6 mm thickness have been used as the base material for preparing single pass butt welded joints. The filler metal used for joining the plates is AA4043 (Al-5Si (wt%)) grade aluminium alloy. In the present work, tensile properties, micro hardness, microstructure and fracture surface morphology of the GMAW, GTAW and FSW joints have been evaluated, and the results are compared. From this investigation, it is found that FSW joints of AA6061 aluminium alloy showed superior mechanical properties compared with GTAW and GMAW joints, and this is mainly due to the formation of very fine, equiaxed microstructure in the weld zone.     

Directed Nanoscale Self‐Assembly of Low Molecular Weight Hydrogelators Using Catalytic Nanoparticles

The work presented here shows that the growth of supramolecular hydrogel fibers can be spatially directed at the nanoscale by catalytic negatively charged nanoparticles (NCNPs). The NCNPs with surfaces grafted with negatively charged polymer chains create a local proton gradient that facilitates an acid‐catalyzed formation of hydrogelators in the vicinity of NCNPs, ultimately leading to the selective formation of gel fibers around NCNPs. The presence of NCNPs has a dominant effect on the properties of the resulting gels, including gelation time, mechanical properties, and network morphology. Interestingly, local fiber formation can selectively entrap and precipitate out NCNPs from a mixture of different nanoparticles. These findings show a new possibility to use directed molecular self‐assembly to selectively trap target nano‐objects, which may find applications in therapy, such as virus infection prevention, or engineering applications, like water treatment and nanoparticle separation.     

Porous PZT ceramics for receiving transducers

PZT-air (porous PZT) and PZT-polymer (polymer impregnated porous PZT) piezocomposites with varying porosity/polymer volume fractions have been manufactured. The composites were characterized in terms of hydrostatic charge (d/sub h/) and voltage (g/sub h/) coefficients, permittivity, hydrostatic figure of merit (d/sub h/.g/sub h/), and absolute sensitivity (M). With decreasing PZT ceramic volume, g/sub h/ increased, and d/sub h/.g/sub h/ had a broad maximum around 80 to 90% porosity/polymer content. The absolute sensitivity was also increased. In each case, PZT-air piezocomposites performed better than PZT-polymer piezocomposites. Hydrophones constructed from piezocomposites showed slightly lower measured receiving sensitivities than calculated values for piezocomposite materials, which was due to the loading effect of the cable and the low permittivity associated with the piezocomposites.     

Reduction of speckle noise from optical coherence tomography images using multi-frame weighted nuclear norm minimization method

In this paper, we propose a speckle noise reduction method for spectral-domain optical coherence tomography (SD-OCT) images called multi-frame weighted nuclear norm minimization (MWNNM). This method is a direct extension of weighted nuclear norm minimization (WNNM) in the multi-frame framework since an adequately denoised image could not be achieved with single-frame denoising methods. The MWNNM method exploits multiple B-scans collected from a small area of a SD-OCT volumetric image, and then denoises and averages them together to obtain a high signal-to-noise ratio B-scan. The results show that the image quality metrics obtained by denoising and averaging only five nearby B-scans with MWNNM method is considerably better than those of the average image obtained by registering and averaging 40 azimuthally repeated B-scans.     

Optimization of Friction Welding Process Parameters for Joining Carbon Steel and Stainless Steel

 Friction welding is a solid state joining process used extensively currently owing to its advantages such as low heat input, high production efficiency, ease of manufacture, and environment friendliness. Materials difficult to be welded by fusion welding processes can be successfully welded by friction welding. An attempt was made to develop an empirical relationship to predict the tensile strength of friction welded AISI 1040 grade medium carbon steel and AISI 304 austenitic stainless steel, incorporating the process parameters such as friction pressure, forging pressure, friction time and forging time, which have great influence on strength of the joints. Response surface methodology was applied to optimize the friction welding process parameters to attain maximum tensile strength of the joint. The maximum tensile strength of 543 MPa could be obtained for the joints fabricated under the welding conditions of friction pressure of 90 MPa, forging pressure of 90 MPa, friction time of 6 s and forging time of 6 s.     

Cognitive preconditions for responses to fairness: An object retrieval test of inhibitory control in capuchin monkeys (Cebus apella).

The authors explore the evolution of one cognitive mechanism required for altruistic behavior: the capacity to inhibit prepotent responses. Specifically, the authors used an object retrieval task to investigate whether capuchins (Cebus apella) can inhibit a prepotent strategy of reaching directly for a food reward. Success in this task varies across species and across development, but is also known to depend critically on the maturity of dorsolateral prefrontal cortex, the cortical area implicated in rejecting small payoffs in an Ultimatum Game. Capuchins easily inhibit the tendency to reach directly for food in the object retrieval task, successfully employing an alternative reaching strategy even in the first session of performance. This contrasts with the performance of closely related tamarin monkeys, who performed less well despite extensive training. These results provide the first evidence that capuchins likely exhibit human-like inhibitory control in tasks previously linked to the function of the dorsolateral prefrontal cortex, such as the Ultimatum Game. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Tensile and Impact Properties of Shielded Metal Arc Welded AISI 409M Ferritic Stainless Steel Joints

The present study is concerned with the effect of filler metals such as austenitic stainless steel, ferritic stainless steel and duplex stainless steel on tensile and impact properties of the ferritic stainless steel conforming to AISI 409M grade. Rolled plates of 4 mm thickness were used as the base material for preparing single pass butt welded joints. Tensile and impact properties, microhardness, microstructure and fracture surface morphology of the joints fabricated by austenitic stainless steel, ferritic stainless steel and duplex stainless steel filler metals were evaluated and the results were reported. From this investigation, it is found that the joints fabricated by duplex stainless steel filler metal showed higher tensile strength and hardness compared to the joints fabricated by austenitic and ferritic stainless steel filler metals. Joints fabricated by austenitic stainless steel filler metal exhibited higher ductility and impact toughness compared with the joints fabricated by ferritic stainless steel and duplex stainless steel filler metals.