Partial acidulation of an ‘unground’ phosphate rock: II. Plant availability of phosphate

Four greenhouse experiments were conducted using three soils to determine the availability to plants of P from unground North Carolina phosphate rock (PR) treated with 20% to 50% of the H₃PO₄ required for complete acidulation. The influences of soil P retention, P status, the method of preparation of partially acidulated phosphate rocks (PAPRs) and the granule size of the products were investigated. Perennial ryegrass was grown as the test plant for up to 8 months. Triple superphosphate (TSP) was used as the standard fertilizer and unground North Carolina rock was included for comparison.The dry matter yield and P uptake response curves showed that in all experiments PAPRs were markedly superior to the PR. P status of soils appeared to influence the effectiveness of PAPRs to a greater extent than P retention. In soils of low P status the degree of acidulation required for PAPR to be nearly or as effective as TSP was 50% whereas in a soil of high P status even 30% PAPR applied as a maintenance fertilizer was effective. There was a significant positive correlation between water soluble P of fertilizers and P uptake by ryegrass. However, in general PAPRs were more effective per unit of water soluble P than TSP. Granule size (< 1 mm and 1–2 mm) and method of preparation of PAPRs did not alter the effectiveness of PAPRs.     

Encrypted Network Traffic Classification and Resource Allocation with Deep Learning in Software Defined Network

Wireless Personal Communications - The climate has changed absolutely in every area in just a few years as digitized, making high-speed internet service a significant need in the future. Future...     

Optimizing Decision-Making of A Smart Prosumer Microgrid Using Simulation

Distributed renewable energy sources offer significant alternatives for Qatar and the Arab Gulf region’s future fuel supply and demand. Microgrids are essential for providing dependable power in difficult-to-reach areas while incorporating significant amounts of renewable energy sources. In energy-efficient data centers, distributed generation can be used to meet the facility’s overall power needs. This study primarily focuses on the best energy management practices for a smart microgrid in Qatar while taking demand-side load management into account. This article looked into a university microgrid in Qatar that primarily aimed to get all of its energy from the grid. While diesel generators are categorized as a dispatchable distributed generation with energy storage added to handle solar radiation from the sun and high grid power operating costs in the suggested scenario, wind turbines and solar Photovoltaic (PV) are classified as non-dispatchable distributed generators. The resulting linear math issues are assessed and displayed in MATLAB optimization software using a mixed-integer linear programming (MILP) strategy. According to the simulation results, the suggested energy management strategy reduced the university microgrid’s grid power costs by 38.8%, making it an affordable solution which is somehow greater than the prior case scenario’s 23% savings. The installed solar system capacity’s effects on the economy, society, and finances were also assessed, and it became clear that the best option for the smart microgrid was determined that would be 325 kW of solar PV, 25 kW of wind turbine, and 600 kW of diesel generators, respectively. Given the current situation, university administrators are urged to participate in distributed generators and adopt cutting-edge designs for energy storage technologies due to the significant environmental and financial benefits.     

FracMAP: A user-interactive package for performing simulation and orientation-specific morphology analysis of fractal-like solid nano-agglomerates

Computer simulation techniques have found extensive use in establishing empirical relationships between three-dimensional (3d) and two-dimensional (2d) projected properties of particles produced by the process of growth through the agglomeration of smaller particles (monomers). In this paper, we describe a package, FracMAP, that has been written to simulate 3d quasi-fractal agglomerates and create their 2d pixelated projection images by restricting them to stable orientations as commonly encountered for quasi-fractal agglomerates collected on filter media for electron microscopy. Resulting 2d images are analyzed for their projected morphological properties.

Program summary

Program title: FracMAPCatalogue identifier: AEDD_v1_0Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEDD_v1_0.htmlProgram obtainable from: CPC Program Library, Queen's University, Belfast, N. IrelandLicensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.htmlNo. of lines in distributed program, including test data, etc.: 4722No. of bytes in distributed program, including test data, etc.: 27 229Distribution format: tar.gzProgramming language: C++Computer: PCOperating system: Windows, LinuxRAM: 2.0 MegabytesClassification: 7.7Nature of problem: Solving for a suitable fractal agglomerate construction under constraints of typical morphological parameters.Solution method: Monte Carlo approximation.Restrictions: Problem complexity is not representative of run-time, since Monte Carlo iterations are of a constant complexity.Additional comments: The distribution file contains two versions of the FracMAP code, one for Windows and one for Linux.Running time: 1 hour for a fractal agglomerate of size 25 on a single processor.     

Automatic classification of Tamil documents using vector space model and artificial neural network

Automatic text classification based on vector space model (VSM), artificial neural networks (ANN), K-nearest neighbor (KNN), Naives Bayes (NB) and support vector machine (SVM) have been applied on English language documents, and gained popularity among text mining and information retrieval (IR) researchers. This paper proposes the application of VSM and ANN for the classification of Tamil language documents. Tamil is morphologically rich Dravidian classical language. The development of internet led to an exponential increase in the amount of electronic documents not only in English but also other regional languages. The automatic classification of Tamil documents has not been explored in detail so far. In this paper, corpus is used to construct and test the VSM and ANN models. Methods of document representation, assigning weights that reflect the importance of each term are discussed. In a traditional word-matching based categorization system, the most popular document representation is VSM. This method needs a high dimensional space to represent the documents. The ANN classifier requires smaller number of features. The experimental results show that ANN model achieves 93.33% which is better than the performance of VSM which yields 90.33% on Tamil document classification.     

AutoTutor: Incorporating Back-Channel Feedback and Other Human-Like Conversational Behaviors into an Intelligent Tutoring System

This paper describes our recent attempts to incorporate human-like conversational behaviors into the dialog moves delivered by an animated pedagogical agent that simulates human tutors. We first present a brief overview of the modules comprising AutoTutor, an intelligent tutoring system. The second section describes a set of conversational behaviors that are being incorporated into AutoTutor. The behaviors of interest involve variations in intonation, head movements, arm and hand movements, facial expressions, eye blinking, gaze direction, and back-channel feedback. The final section presents a recent empirical study concerned with back-channel feedback events during human-to-human tutoring sessions. The back-channel feedback events emitted by tutors are mostly positive (63%), mostly verbal (77%), and immediately follow speech-act boundaries or noun-phrase boundaries (83%). Tutors also deliver back-channelevents at a very high rate when students are emitting dialog, about 13 events per minute. Conversely, 88% of students' back-channel feedback events are head nods, and they occur at unbounded locations (63%).     

Symmetry relations in multidimensional Fourier transform pairs

A relation between the types of symmetries that exist in signal and Fourier transform domain representations is derived for continuous as well as discrete domain signals. The symmetry is expressed by a set of parameters, and the relations derived in this paper will help to find the parameters of a symmetry in the signal or transform domain resulting from a given symmetry in the transform or signal domain respectively. A duality among the relations governing the conversion of the parameters of symmetry in the two domains is also brought to light. The application of the relations is illustrated by a number of two-dimensional examples.Notation R the set of real numbers - R ^m R × R × ... × R m-dimensional real vector space - continuous domain real vector - L {¦ – _i , i = 1,2,..., m} - m-dimensional frequency vector - W { – _i ,i=1,2,..., m} - m-dimensional normalized frequency vector - _P {¦ – _i , i=1,2,...,m} - g(ol) g (₁,₂,..., _m ) continuous domain signal - () ( _{1 2},..., _m )=G (j ₁,j ₂,..., j _m ) Fourier transform ofg (ol) - (A,b,,,) parameters ofT- symmetry - N the set of integers - N ^m N × N × ... × N m-dimensional integer vector spacem-dimensional lattice - h(n) h (n ₁,.,n _m ) discrete domain signal - H() Fourier transform ofh (n) - v ₁,v ₂,..., v_m m sample-direction and interval vectors - V (v ₁ v ₂ ...v _m ) sampling basis matrix - [x]^* complex conjugate ofx - detA determinant ofA - X {x¦ – x _i , i=1,2,..., m} - A ^–t [A ^–1] ^t ,t stands for transpose This work was supported in part by the Natural Sciences and Engineering Research Council of Canada under Grant A-7739 to M. N. S. Swamy and in part by Tennessee Technological University under its Faculty Research support program to P. K. Rajan.     

Influence of Silicon Morphology and Mechanical Properties of Piston Alloys

In this paper, the influence of silicon particle morphology on mechanical properties of two piston alloys has been reported. Alloys having nominal composition Al-12%Si-1%Ni-0.8%Cu-0.6%Mg (LM13) and Al-17%Si-1%Ni-0.8%Cu-0.6%Mg (LM28) were prepared by melting and casting. The morphology of silicon crystals was changed using additives during the melt treatment and subsequently by heat treatment. Mechanical properties such as hardness, ductility, and tensile strength of experimental alloys were tested. Test results showed that the melt treatment and heat treatment of both the alloys increased the tensile strength, hardness, and ductility. However, the influence of melt treatment on mechanical properties was not as significant as that of heat treatment. Tensile strength and ductility of LM13 was found to be higher than the LM28 alloy under similar conditions. Hardness of LM28 was higher than the LM13 alloy. Optical and SEM studies showed a change in eutectic silicon morphology on melt treatment of LM13. However, change in morphology of primary silicon particles was not significant as for LM28. Heat treatment of both alloys caused spheroidization and better distribution of eutectic silicon crystals. Sharp-edged primary silicon particles were rounded off after the heat treatment of LM28. Scanning electron microscopy (SEM) of tensile fractured surfaces was carried out to study the influence of microstructure on fracture mode. Heat treatment of both alloys promotes dimple fracture. However, as-cast and melt-treated alloys show predominantly cleavage fracture.     

A design approach for systems based on magnetic pulse compression

A design approach giving the optimum number of stages in a magnetic pulse compression circuit and gain per stage is given. The limitation on the maximum gain per stage is discussed. The total system volume minimization is done by considering the energy storage capacitor volume and magnetic core volume at each stage. At the end of this paper, the design of a magnetic pulse compression based linear induction accelerator of 200 kV, 5 kA, and 100 ns with a repetition rate of 100 Hz is discussed with its experimental results.     

Carbon Nanotube Reinforced Polyimide Thin-film for High Wear Durability

In this paper, the influence of single walled carbon nano tubes (SWCNTs) addition on the tribological properties of the polyimide (PI) films on silicon substrate was studied. PI films, with and without SWCNTs, were spin coated onto the Si surface. Coefficient of friction and wear durability were characterized using a ball-on-disk tribometer by employing a 4 mm diameter Si₃N₄ ball sliding against the film, at a contact pressure of ∼370 MPa, and a sliding velocity of 0.042 ms⁻¹. Water contact angle, AFM topography, and nano-indentation tests were conducted to study the physical and mechanical properties of the films. SWCNTs marginally increased the water contact angle of PI film. The addition of SWCNTs to PI has increased the hardness and elastic modulus of pristine PI films by 60–70%. The coefficient of friction of PI films increased slightly (∼20%) after the addition of SWCNTs, whereas, there was at least two-fold increase in the wear life of the film based on the film failure condition of coefficient of friction higher than 0.3. However, the film did not show any sign of wear even after 100,000 cycles of rotation indicating its robustness. This increase in the wear durability due to the addition of the SWCNTs is believed to be because of the improvement in the load-bearing capacity of the composite film and sliding induced microstructural changes of the composite film.