Iron(III)-mediated ATRP systems of n-docosyl acrylate with AIBN and BPO

Well-defined poly(n-docosyl acrylate) (PDA) with narrow molecular weight distribution has been synthesized by atom transfer radical polymerization (ATRP) and reverse ATRP of n-docosyl acrylate (DA) at 80 °C in N,N-dimethylformamide using the carbon tetrabromide/FeCl₃/2,2′-bipyridine (bpy) initiation system in the presence of 2,2′-azobisisobutyronitrile (AIBN) and benzoyl peroxide (BPO) as the source of reducing agent. The rates of polymerization for both the systems exhibit first-order kinetics with respect to the monomer, however, peroxide-initiated system shows slow rate of polymerization as compared to the azo-system. The effect of various reaction parameters on number average molecular weight (M _n ) and molecular weight distribution (M _w/M _n ) have been investigated. The resulting PDA that obtained in presence of AIBN and BPO systems has been compared for both the conventional and reverse ATRP. The reverse ATRP initiated by peroxides behaves differently than that of the azo initiators. In reverse ATRP with BPO, the rate of polymerization (R _p) has been significantly increased with the increase of BPO resulting higher M _n and broader M _w/M _n . The reverse ATRP of DA did not exhibit living characteristics with BPO system. PDA has been characterized by GPC, FTIR, and NMR spectroscopy.     

An investigation on the heterogeneous nature of mineral matters in Assam (India) coal by CCSEM technique

This is a very first preliminary investigation on the distribution of heterogeneous nature of mineral matter in one of the industrially important Assam (India) pulverized coal using computer-controlled scanning electron microscopy (CCSEM). The results show that clay minerals, quartz, pyrite, and pyrrhotite form the bulk of the mineral matter. Minor minerals, such as calcite, dolomite, ankerite, barite, oxidized pyrrhotite, and gypsum, are also observed in the sample. The particle size distribution (PSD) of the included minerals is generally observed to be finer than that of the excluded ones in the coal. As a consequence, the coal rich in included minerals has more small mineral particles, which may affect its reactivity. Regarding the association of individual mineral species, the proportion of included to excluded is found to be higher in major cases. With regard to the modes of occurrence of major inorganic elements, it is found that Si mostly occurs as quartz and clay minerals, while Al mostly occurs as silicate minerals. Fe is primarily present as iron sulfides, iron oxide, and Fe-Al-silicate. S is partitioned into iron sulfides and gypsum. Most Ca occurs as carbonates and gypsum, with a minor fraction associated with clay minerals. Mg is mainly present as dolomite and clay minerals, with a very minor fraction present as ankerite. The majority of alkali elements are associated with aluminosilicates. P is mostly associated with kaolinite and/or present as more complex compounds containing Al, Si, and other elements as apatite is found to be absent in the coal studied. Ti is mainly present as rutile and kaolinite.     

High performance HTLNR/epoxy blend—Phase morphology and thermo-mechanical properties

An attempt was made to toughen diglycidyl ether of bisphenol A (DGEBA) type epoxy resin with liquid natural rubber possessing hydroxyl functionality (HTLNR). Epon 250 epoxy monomer is cured using nadic methyl anhydride as hardener in presence of N, N dimethyl benzyl amine as accelerator. HTLNR of different concentrations up to 20 wt % is used as modifier for epoxy resin. The addition HTLNR to an anhydride hardener/epoxy monomer mixture has given rise to the formation of phase-separated structure, consisting of small spherical liquid natural rubber particles bonded to the surrounding epoxy matrix. The particle size increased with increase in rubber content. The viscoelastic properties of the blends were analyzed using dynamic mechanical thermal analysis. The T_g corresponding to epoxy rich phase was evident from the dynamic mechanical spectrum, while the T_g of the rubber phase was overlapped by the β relaxation of epoxy phase. Glass transition of the epoxy phase decreased linearly as a function of the amount of rubber. The mechanical properties such as impact and fracture toughness were also carefully examined. The impact and fracture toughness increase with HTLNR content. A threefold increase in impact strength was observed with 15 wt % HTLNR/epoxy blend. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Additive Manufacturing of Polymer-Based Lubrication

The fast growth of 3D printing technology gives designers many ways to make structures that are hard to see. 3D printing lets you customize complex structures in any way you want and make rapid prototypes of materials. It enables you to simulate things more effectively. So far, experiments with polymer-based lubrication have been done on atomically smooth surfaces, under dynamic conditions, and on the nano- or micro-scale. Polymer-based lubrication in 3D printing has been studied in depth, which has made it possible to make significant, multifunctional 3D structures with microscale accuracy. It is a crucial way to approach lubrication and has sparked much scientific interest. A thorough literature review is done to keep track of the latest advances in 3D printing for structural polymer-based lubrication simulation. The design and lubrication performance quality of bio-inspired, different-sized simulation structures is given much attention. The material requirements, skills, and representative applications of various 3D printing technologies are summarized. The efficient directions for future research in designing and making 3D-printed lubrication structures are also pointed out.     

Reverse atom transfer radical polymerization of stearyl methacrylate using 2,2′‐azobisisobutyronitrile as the initiator

The living/controlled radical polymerization of stearyl methacrylate was carried out with a conventional radical initiator (2,2′‐azobisisobutyronitrile) in N,N‐dimethylformamide in the presence of a 2,2′‐bipyridine complex of hexakis(N,N‐dimethylformamide)iron(III) perchlorate. The polymerization mechanism was thought to proceed through a reverse atom transfer radical polymerization. The molecular weights of resulting poly(stearyl methacrylate) increased with conversion, and the resulting molecular weight distributions were quite narrow. The rates of polymerization exhibited first‐order kinetics with respect to the monomer. A probable reaction mechanism for the polymerization system is postulated to explain the observed results. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1236–1245, 2002     

Synthesis of AlPO4 Molecular Sieves with AFI and AEL Structures by Dry-Gel Conversion Method and Catalytic Application of Their SAPO Counterparts on Isopropylation of Biphenyl

AlPO₄-5 and AlPO₄-11 were synthesized by dry-gel conversion (DGC) method. Steam-assisted conversion (SAC) and vapor-phase transport (VPT) techniques were applied for this purpose. The synthesis was successful in presence of a certain minimum amount of external bulk water, without which the crystallization failed. Crystallization by VPT method was slower than corresponding SAC and HTS method. SAPO analogs of the samples, SAPO-5 and SAPO-11 were also synthesized by DGC method. Samples made by DGC methods had higher yield than the conventional hydrothermal synthesis (HTS); otherwise the samples showed similar characteristics as that made by HTS. XRD, SEM and N₂-adsorption results showed high crystallinity and purity of the samples made by DGC, and ²⁷Al MAS NMR spectra indicated the tetrahedral framework nature of Al. SAPO-5 and SAPO-11 were tested for their catalytic activity in isopropylation of biphenyl, and in terms of conversion and selectivity, SAPO-5 was found to be suitable for this application.     

Enhancement in CO oxidation activity of nanosized CexZr1−xO2 solid solutions by incorporation of additional dopants

The influence of Hf, Pr and Tb dopant cations on structural and catalytic properties of nanosized Ce_xZr_1?xO₂ solid solutions has been investigated. A wide range of analytical techniques are utilized to characterize the synthesized materials, and the catalytic activity is evaluated for CO oxidation. XRD, Raman, SEM and TEM results suggested formation of dopant cation incorporated ceria–zirconia solid solutions with highly homogeneous morphology and lattice defects. The CO-TPR measurements revealed an enhanced reducibility of Ce_xZr_1?xO₂ which is reflected in their better catalytic activity. The role of Tb⁴⁺/Tb³⁺ and Pr⁴⁺/Pr³⁺ redox couples in facilitating a higher activity has been addressed.     

Effect of spheroidized microstructure on the impact toughness and electrochemical performance of a high-carbon steel

The influence of cementite spheroidization on the impact toughness and electrochemical properties of a high-carbon steel has been thoroughly investigated in this study. Heavy warm rolling, followed by 2 h of annealing, has resulted in near-complete spheroidization, leading to a microstructure consisting of nano-cementite globules dispersed in the ultrafine-grained ferritic matrix. The Charpy impact test exhibited superior impact toughness with increased spheroidization. It is validated by the presence of abundant dimples in the fractographs of spheroidized specimens, in contrast to the as-received one that experienced a brittle failure due to its lamellar pearlitic structure. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) carried out in a 3.5% NaCl solution revealed that the corrosion resistance of the alloy gets improved with the increase in the degree of spheroidization. This is attributed to the lower susceptibility of the spheroidized specimen to microgalvanic corrosion owing to the minimum area of contact between nano-spheroidized cementite and ferrite, as elucidated with the help of EIS results aided by equivalent electrical circuit model.