Polysilazane derived micro/nano Si3N4/SiC composites

The pyrolised polysilazanes poly(hydridomethyl)silazane NCP 200 and poly(urea)silazane CERASET derived Si–C–N amorphous powders were used for preparation of micro/nano Si₃N₄/SiC composites by hot pressing. Y₂O₃–Al₂O₃ and Y₂O₃–Yb₂O₃ were used, as sintering aids. The resulting ceramic composites of all compositions were dense and polycrystalline with fine microstructure of average grain size <1 μm of both Si₃N₄ and SiC phases. The fine SiC nano-inclusions were identified within the Si₃N₄ micrograins. Phase composition of both composites consist of , β modifications of Si₃N₄ and SiC. High weight loss was observed during the hot pressing cycle, 12 and 19 wt.% for NCP 200 and CERASET precursors, respectively. The fracture toughness of both nanocomposites (NCP 2000 and CERASET derived) was not different. Indentation method measured values are from 5 to 6 MPa m^1/2, with respect to the sintering additive system. Fracture toughness is slightly sensitive to the SiC content of the nanocomposite. Hardness increases with the content of SiC in the nanocomposite. The highest hardness was achieved for pyrolysed CERASET precursor with 2 wt.% Y₂O₃ and 6 wt.% Yb₂O₃, HV 23 GPa. This is a consequence of the highest SiC content as well as the chemical composition of additives.     

Treatment of strongflow wool scouring effluent by biological emulsion destabilisation

The stable oil-in-water emulsion contained in wool scouring effluent was destabilised by aerobic biological treatment as the basis of a potential new effluent treatment process. The de-emulsified wool wax, which is recalcitrant to biodegradation, can then be readily removed by centrifugation. In 12-day batch experiments, 97% of wool wax and 87% of COD were removed after gentle centrifuging at 200 x g, compared to only 6% and 8%, respectively, for sterile controls. Steady-state chemostat experiments under optimum conditions gave essentially complete removal of wool wax and 90% removal of COD at less than 40 h retention time, and demonstrated that the mechanism of pollutant removal was by bioflocculation rather than aerobic degradation. At 100 L pilot scale, 95% of wool wax and 82% of COD were consistently removed over a period of 116 days of continuous operation at 38 h retention time and 30 degrees C, producing a spadable sludge of 5.7 mL/g. Variable influent concentration or filamentous bacteria did not disrupt this process and foaming was readily controlled using a mechanical foam breaker. After a shutdown period of 15 days the process could be restarted easily, achieving normal performance within one retention time. The successful operation of the pilot reactor suggests this process could be developed to full scale and incorporated into an overall treatment package.     

Säurekatalysierte Umsetzungen von Aromaten mit Alkanen und Cycloalkanen. IX. Alkylierungen mit 2,2,4-Trimethylpentan (Isooctan)

Acid-catalyzed Reactions of Aromatic Hydrocarbons with Alkanes and Cycloalkanes. IX. Alkylations with 2,2,4-Trimethylpentane (Isooctane) The non-conventional alkylation of benzene, toluene, ethyl- and isopropylbenzene, fluoro- and chlorobenzene with 2,2,4-trimethylpentane in the presence of acid catalysts is described. The composition of the rather complex reaction mixtures is determined by gas-liquid chromatography and mass spectrometry, tert. butylarenes being the main products beside alkylsubstituted indanes and tetralines. Their formation is interpreted as a competition between fragmentation and isomerization of the alkylating agent. By use of trifluoromethanesulfonic acid or combinations of catalysts from HF or HSO₃F with variant metallic fluorides at lower temperatures the selectivity of the reaction may be partially raised.     

Detecting landscape forms using Fourier transformation and singular value decomposition (SVD)

Landscape structure is a main determinant of ecological landscape potentials. The basic differentiation of relief into depressions and elevations at deliberately chosen scales can be managed comfortably by the Fourier transformation. The automated extraction of these structures from an elevation map using Fourier transformation or singular value decomposition can help to overcome complicated and errorprone procedures based on the determination of numerical structure parameters such as slope and aspect. The combination of automated extraction methods and moving window technology can lead to further, more integrated insights related to complex landscape patterns.     

The effects of food essential oils on cardiovascular diseases: A review

Essential oils (EO) are complex secondary metabolites, which are produced by aromatic plants and identified by their powerful odors. Present studies on EO and their isolated ingredients have drawn the attention of researchers to screen these natural products and evaluate their effect on the cardiovascular system. Some EO, and their active ingredients, have been reported to improve the cardiovascular system significantly by affecting vaso-relaxation, and decreasing the heart rate and exert a hypotension activity. Several mechanisms have been proposed for the role of EO and their main active components in promoting the health of the cardiovascular system. The objective of this review is to highlight the current state of knowledge on the functional role of EO extracted from plants for reducing the risk of cardiovascular diseases and their mechanisms of action. Research on EO has the potential to identify new bioactive compounds and formulate new functional products for the treatment of cardiovascular diseases such as arterial hypertension, angina pectoris, heart failure, and myocardial infarction.     

Simulation based analysis of secondary effects on solder fatigue

Secondary effects on thermal fatigue of solder joints, which frequently have been neglected, were studied by means of the finite element method (FEM). Based on a semi-empirical approach to predict fatigue life by evaluating the cyclic accumulated equivalent creep strain or energy density, effects of organic boards intrinsic properties on solder joint fatigue were investigated. Aspects of more realistic FR-4 board modelling were studied, in particular concerning its in-plane anisotropy and intrinsic warpage behaviour. Intrinsic board warpage was measured on test board level as well as for boards from series production. High intrinsic warpage was in particular found for several test boards. The effects for the worst case scenario observed so far were analysed for both first level and second level interconnects. The change in predicted fatigue life varied between 30% and 500%, the latter most critical effects were found at large QFN components. Another secondary effect studied was to include the frequently neglected interfacial intermetallics into FEM. It turned out that for components with relatively large standoff like LFBGAs the effects were actually negligible, but for the highly miniaturized components like chip resistors CR0201 they are the decisive factor.