在机床研发中基于职能单位的产品开发理论与实践

通过调查得知,包括虚拟现实技术在机床制造中应用可能性的应用方法、策略和工具在产品开发中的现状.对调查结果进行了讨论,考虑到研究理论的可移植性和对企业内部实战的依赖性.讨论的结果为基础研究领域的命题"基于职能单位的产品开发"提供结论.     

Using internal domain-specific languages to inherit tool support and modularity for model transformations

Software and Systems Modeling - Model-driven engineering (MDE) has proved to be a useful approach to cope with today’s ever-growing complexity in the development of software systems;...     

Correlation of Ⅲ/Ⅴ semiconductor etch results with physical parameters of high-density reactive plasmas excited by electron cyclotron resonance

Reactive ion etching is the interaction of reactive plasmas with surfaces. To obtain a detailed understanding of this process, significant properties of reactive composite low-pressure plasmas driven by electron cyclotron resonance(ECR) were investigated and compared with the radial uniformity of the etch rate. The determination of the electronic properties of chlorine-and hydrogen-containing plasmas enabled the understanding of the pressure-dependent behavior of the plasma density and provided better insights into the electronic parameters of reactive etch gases. From the electrical evaluation of I(V) characteristics obtained using a Langmuir probe,plasmas of different compositions were investigated. The standard method of Druyvesteyn to derive the electron energy distribution functions by the second derivative of the I(V)characteristics was replaced by a mathematical model which has been evolved to be more robust against noise, mainly, because the first derivative of the I(V) characteristics is used. Special attention was given to the power of the energy dependence in the exponent. In particular, for plasmas that are generated by ECR with EM modes, the existence of Maxwellian distribution functions is not to be taken as a self-evident fact, but the bi-Maxwellian distribution was proven for Ar-and Kr-stabilized plasmas. In addition to the electron temperature, the global uniform discharge model has been shown to be useful for calculating the neutral gas temperature. To what extent the invasive method of using a Langmuir probe could be replaced with the noninvasive optical method of emission spectroscopy, particularly actinometry, was investigated,and the resulting data exhibited the same relative behavior as the Langmuir data. The correlation with etchrate data reveals the large chemical part of the removal process—most striking when the data is compared with etching in pure argon. Although the relative amount of the radial variation of plasma density and etch rate is approximately ?5%, the etch rate shows a slightly concave shape in contrast to the plasma density.     

Correlation of III/V semiconductor etch results with physical parameters of high-density reactive plasmas excited by electron cyclotron resonance

Reactive ion etching is the interaction of reactive plasmas with surfaces. To obtain a detailed understanding of this process, significant properties of reactive composite low-pressure plasmas driven by electron cyclotron resonance (ECR) were investigated and compared with the radial uniformity of the etch rate. The determination of the electronic properties of chlorine-and hydrogen-containing plasmas enabled the understanding of the pressure-dependent behavior of the plasma density and provided better insights into the electronic parameters of reactive etch gases. From the electrical evaluation of I(V ) characteristics obtained using a Langmuir probe, plasmas of different compositions were investigated. The standard method of Druyvesteyn to derive the electron energy distribution functions by the second derivative of the I(V ) characteristics was replaced by a mathematical model which has been evolved to be more robust against noise, mainly, because the first derivative of the I(V ) characteristics is used. Special attention was given to the power of the energy dependence in the exponent. In particular, for plasmas that are generated by ECR with EM modes, the existence of Maxwellian distribution functions is not to be taken as a self-evident fact, but the bi-Maxwellian distribution was proven for Ar-and Kr-stabilized plasmas. In addition to the electron temperature, the global uniform discharge model has been shown to be useful for calculating the neutral gas temperature. To what extent the invasive method of using a Langmuir probe could be replaced with the non-invasive optical method of emission spectroscopy, particularly actinometry, was investigated, and the resulting data exhibited the same relative behavior as the Langmuir data. The correlation with etchrate data reveals the large chemical part of the removal process—most striking when the data is compared with etching in pure argon. Although the relative amount of the radial variation of plasma density and etch rate is approximately ±5%, the etch rate shows a slightly concave shape in contrast to the plasma density.     

Seasonal and diurnal variation of PM2.5 apparent particle density in urban air in Augsburg, Germany

The apparent particle density of particulate matter with aerodynamic diameter < 2.5 microm (rho2.5) was determined at an urban site in Augsburg, Germany and its correlation with chemical composition and meteorological conditions was investigated. rho2.5 showed strong day-to-day variation from 1.05 to 2.36 g cm(-3) (5 to 95% percentile), and nearly 64% of the daily variability could be explained by a multiple variable regression model. A minimum in the morning and afternoon (about 1.5 g cm(-3)), and a maximum (near 1.8 g cm(-3)) during midday was observed. The minima represent fresh primary aerosol emissions, which were related to traffic soot particles with low density due to their agglomerate structure, especially observed in the early morning hours of weekdays. The maximum is likely due to increased secondary particle production and the presence of more aged particles with the built-up of the convectively mixed boundary layer. rho2.5 has the potential to serve as a crude tracer for chemical composition and atmospheric processing and might play an important role when considering the associations between health effects and ambient particles.     

Laser flash photolysis studies on homo-and copolymers of phenylisopropenyl ketone and of pivalophenone in solution

Benzene solutions of poly(phenylisopropenyl ketone) (PPIK), of copolymers of PIK and styrene and of phenyl-t-butyl ketone (pivalophenone) were irradiated with light flashes (duration 25 nsec) at wavelength 347 nm. The spectra observed at the end of the flash were attributed to the triplet state (T-T-spectra). A fraction of the triplets in the polymers was deactivated by T-T annihilation, as evidenced by lifetimes decreasing with increasing absorbed dose rate. Upon extrapolation to zero intensity the following triplet decay rate constants K_T were obtained:

$\text{(1.0 ± 0.1) 10}{}^7\text{sec}{}^{\mathrm{?}}\text{(}\text{PPIK}\text{),}$

$\text{(8 ± 1) 10}{}^6\text{sec}{}^{\mathrm{?1}}\text{(}\text{CPStPlK12}\text{), (6 ± 1) 10}{}^6\text{sec}{}^{\mathrm{?1}}\text{(}\text{CPStPlK3.7}\text{)}$

$\text{(3 ± 1) 10}{}^6\text{sec}{}^{\mathrm{?1}}\text{(}\text{CPStPlK1}\text{)}$

$\text{(2.5 ± 0.2) 10}{}^6\text{sec}{}^{\mathrm{?1}}\text{(}\text{pivalophenone}\text{)}$

.In PPIK and pivalophenone the dominant chemical route of triplet deactivation is α-cleavage. The relatively high k_T value found with PPIK is presumably due to next neighbour interaction. In copolymers with a high content of isolated PIK units type I processes (α-cleavage) become less probable due to weak next neighbour influence. Thus type II processes dominate in copolymers although being slower than type I processes in homo PPIK. The rate constant of the reaction of PIK triplets in homo PPIK with 2-propanol in benzene solution is (2.0 ± 0.2)10⁶ l/mol sec, whereas pivalophenone triplets react almost 10 times slower with 2-propanol. The difference is assumed to be due to a rather strong interaction of 2-propanol with ground state as well as with excited pivalophenone.     

Monoclinic Zirconia Bodies by Thermoplastic Ceramic Extrusion

Two ultrafine, undoped ZrO₂ powders with median primary particle sizes of 9 and 25 nm were used to prepare ceramic suspensions for thermoplastic extrusion. The organic vehicle consisted of an industrial-grade poly(ethylene- co -vinyl acetate) (EVA) or polyethylene (PE-HD) and decanoic acid as a dispersing agent. The powder volume loadings achieved were 44% and 52% by volume for the two powders, respectively. The amount of dispersant needed was calculated from a new model based on available chemisorption sites on the powder surface. Mixing and extrusion were conducted using a conventional modular plastic processing unit. Green bodies were dewaxed up to 450°C in an inert atmosphere and sintered to full density in air at 1060° and 1100°C, respectively. Analysis of the ceramic phase content and the microstructure of the bodies is presented.     

Toughness Optimization of SBR Elastomers – Use of Fracture Mechanics Methods for Characterization

Elastomer materials are used in a wide application range and subjected to different loading from which failure of the material results. Because this failure is caused by initiation and propagation of cracks, the application of fracture mechanics methods for the assessment of the material is obvious. A short summary of the methods of technical fracture mechanics including possibilities of determination of crack resistance curves is given. Vulcanizates on the basis of SBR 1500 with various sulfur and carbon black contents were investigated. For describing the crack initiation and crack propagation behavior, several fracture mechanics examination methods were applied. Tear‐analyzer results were used to assess the crack propagation behavior under fatigue‐like loading conditions. Furthermore, for the characterization of the crack resistance of the materials under impact‐like loading conditions, instrumented tensile‐impact tests were performed. To obtain information about the initiation and propagation of a stable crack, quasi‐static fracture mechanics tests were applied. The results of the several tests are discussed in dependence on sulfur and carbon black contents. We found a non‐monotonous behavior of the toughness as a function of carbon black loading. An explanation is given in connection with a percolation‐like transition in filler morphology on larger length scales.

Schematic crack propagation curve for characterizing the fatigue behavior of the vulcanizates recorded in a TFA test.