Tools for dynamic analysis of the general large power system using time-varying phasors

This paper extends the applicable range of phasors for transient analysis from the traditional slow quasi-stationary range to accommodate fast speeds up to the carrier frequency. Rigorous phasor calculus is developed for time varying low pass phasor signals whose bandwidths are less than the 60 Hz carrier frequency. Symmetrical components technique for analysing quasi-stationary unbalanced power system transients is extended to cover the low pass time-varying phasors. It is also proved that the time varying phasors can be used for computing the fast electromagnetic transients within the linear RLC lumped parameter representation of the transmission network irrespective of the transient speeds. In linear networks, this time-varying phasor concept unifies two classical approaches: (1) transient analysis using instantaneous currents and voltages, and (2) steady state analysis using traditional phasors, into analysing both behaviours precisely using the time-varying phasors.     

Synthesis and characterization of acidic properties of Al-SBA-15 materials with varying Si/Al ratios

Al-SBA-15 of varying Si/Al ratios in the range 11.4–78.4 was synthesized using tri-block copolymer P123. The calcined materials were examined by XRD, pore size distribution, surface area, ²⁷Al NMR spectroscopy. The acidity and acid strength distribution were studied using microcalorimetric adsorption of NH₃. The acidic properties were also examined by cumene cracking reaction as a function of Si/Al ratios. Systematic variation of acidity and activity was observed as a function of Si/Al ratio. The initial heats of NH₃ adsorption correlated well with activity indicate that acid sites with ΔH > 100 kJ/mole is responsible for cumene cracking activity. Linear correlations were obtained with total acidity and cumene cracking activities. The tetrahedral aluminum was found to be responsible for the observed acidities and catalytic activities.     

Recent investigations on some cubic Laves phase compounds of rare earth and transition metals

Pseudobinary alloy, Tb_0·27Dy_0·73Fe_2−δ , belonging to C-15 cubic Laves phase having MgCu₂-type structure, possesses large magnetostriction and high magnetomechanical coupling coefficient. The advantages of this material over existing piezoelectric materials, particularly for SONAR applications, are highlighted. Recent results on the influence of cobalt (Co) on magnetic and magnetomechanical properties of Tb_0·27Dy_0·73Fe₂ are discussed.     

Red emission from Eu3+: PVA polymer film

Bright red luminescent Eu³⁺ doped polyvinyl alcohol (PVA) films were made by solution casting technique. The emission performance of these films was studied from the measurement of excitation, emission, and lifetimes. On irradiation with an UV source, the doped films emitted bright red light. Such luminescent polymer films are expected to find potential applications as new optical materials. Emission process in the system was explained by an energy level scheme. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3273–3276, 2006     

Geographic variations in the composition of ivory of the African elephant (Loxodonta africana)

OBJECTIVES: The purpose of the present study was to compare the inclination of the occlusal plane with occlusal guidance as a contributing factor to masticatory movement. METHODS: Masticatory movements of 41 young adults were measured using a 3-D mandibular movement analysing system. The inclination of the occlusal plane was measured in the sagittal plane using a 3-D digitizer. The contribution of the occlusal guidance and the inclination of the occlusal plane to the direction of the masticatory path of closure was evaluated at various closing levels. RESULTS: The masticatory path of closure outside the intercuspal range was influenced mainly by the inclination of the occlusal plane, and the masticatory path of closure near the intercuspal range was only influenced by occlusal guidance. The so-called gliding type masticatory pattern was observed predominantly in subjects with a posteriorly inclined occlusal plane. In contrast, a chopping type masticatory pattern was observed predominantly in subjects with an anteriorly inclined occlusal plane. CONCLUSIONS: The contribution of the inclination of the occlusal plane to masticatory movement was greater than that of occlusal guidance throughout the closing phase except near the intercuspal range.     

Structure and dynamics of a pentablock copolymer of polystyrene-polybutadiene in a butadiene-selective solvent

We have examined solutions of a polystyrene-polybutadiene pentablock copolymer in n-heptane, a strongly selective solvent for polybutadiene. Small angle neutron scattering from 7 to 15% samples reveals domains about 10 nm in radius formed by the association of 200 polystyrene blocks. Dynamic light scattering measurements on 8 and 9% samples showed three modes: a fast diffusive mode related to the collective diffusion in semidilute solutions/gels; a relaxational mode related to the local dynamics of polystyrene domains trapped in the gel formed by bridging the domains with the polybutadiene chains; and a very slow diffusive mode. The relaxational dynamics persisted over the entire temperature range, becoming faster with increasing temperature, indicating a decreased microviscosity at higher temperatures. The slow dynamics seems to be connected with heterogeneities in the physical gel due to microsyneresis and almost disappeared above 50 °C. Macroscopic phase separation into two liquid phases was observed in a dilute solution of the un-associated copolymer, and into a liquid and gel phase at higher concentrations. The absence of flower-like micelles in dilute solutions and the macroscopic phase seperation suggest that the gels in the pentablock are formed by random association of multiplet domains and not by bridging of micellar domains.     

HEAT TRANSFER IN A THIN LIQUID FILM IN THE PRESENCE OF AN ELECTRIC FIELD

Heat transfer enhancement in an evaporating thin liquid film utilizing a electric field under isothermal interfacial condition is presented. A new mathematical model subjected to van der Waals attractive forces, capillary pressure, and an electric field is developed to describe the heat transfer enhancement in the evaporating thin liquid film. The effect of the electrostatic field on the curvature of the thin film, evaporative flux, pressure gradient distribution, heat flux, and heat transfer coefficient in the thin film is presented. The results show that applying an electric field can enhance heat transfer in a thin liquid film significantly. In addition, utilizing electric fields on the evaporating film will be a way to expand the extended meniscus region to attain high heat transfer coefficients and high rates of heat flux.     

Numerical study of thermodiffusion effects on boundary layer flow of nanofluids over a power law stretching sheet

This paper deals with the triple-diffusive boundary layer flow of nanofluid over a nonlinear stretching sheet. In this model, where binary nanofluid is used, the Brownian motion, thermophoresis, and cross-diffusion are classified as the main mechanisms, which are responsible for the enhancement of the convection features of the nanofluid. The boundary layer equations governed by the partial differential equations are transformed into a set of ordinary differential equations with the help of group theory transformations, which is introduced by Blasius (The boundary layers in fluids with little friction, 1950). The variational finite element method is used to solve these ordinary differential equations. We have examined the effects of different controlling parameters, namely the Brownian motion parameter, the thermophoresis parameter, modified Dufour number, nonlinear stretching parameter, Prandtl number, regular Lewis number, Dufour Lewis number, and nanofluid Lewis number on the flow field and heat transfer characteristics. The physics of the problem is well explored for the embedded material parameters through tables and graphs. The present study has many applications in coating and suspensions, movement of biological fluids, cooling of metallic plate, melt-spinning, heat exchangers technology, and oceanography.