Lubricating and physico-chemical properties of CI- 4 plus engine oil dispersed with surface modified multi-walled carbon nanotubes

This paper studies the effect of surface modification of multiwall carbon nanotubes (MWCNTs) prior to dispersion in engine oil to improve the tribological properties. The MWCNTs are stabilised in the lubricant with two different surfactants cetrimonium bromide (CTAB) and sorbitan monooleate (SPAN 80) and the effect of surfactants on the tribological properties has been studied. Pristine and surface modified MWCNTs in weight per cent range of 0·5% are dispersed in CI4 plus diesel engine oil. The foaming tendency and other physico-chemical properties of test lubricant have been studied to investigate the effect of nano materials and surfactants. The anti-wear and anti-friction properties are tested on a four ball wear tester and the comparison is made to assess the relative performance of pristine MWCNTs over surface modified MWCNTs. A strong influence of the surface modification technique is found on lubricating and physico-chemical properties. Both CTAB and SPAN 80 could keep the MWCNTs stable in the lubricant without compromising the foaming tendency of lubricant and other physico-chemical properties. The friction and wear characteristics of lubricants have improved with the dispersion of surface modified MWCNTs while there is no improvement in the properties of lubricant dispersed with pristine MWCNTs.     

The propagation of pressure in a gelled waxy oil pipeline as studied by particle imaging velocimetry

Paraffinic crude oils in pipelines may form waxy gels during flow shutdowns. These gels can be dislodged by applying pressure if the wall shear stress, proportional to the local pressure gradient, exceeds the gel yield stress. The simplest models assume that the axial pressure profile becomes linear immediately after a jump in upstream pressure, but this fails to account for gel time‐dependent rheology or the effect of gel voids on pressure wave propagation. To investigate the former factor, pressure profile and particle imaging velocimetry (PIV) measurements were performed on a model oil gelled under pressure to reduce void formation. After a jump in upstream pressure to a value insufficient to restart flow, the axial pressure profile becomes linear in a two‐step process, with an immediate small rise in downstream pressure followed by a time‐delayed jump. The local downstream gel deformation measured by PIV exhibits similar two‐step time dependence. © 2011 American Institute of Chemical Engineers AIChE J, 2012     

Nitrites Derived From Foneiculum Vulgare (Fennel) Seeds Promotes Vascular Functions

Abstract: Recent evidence has demonstrated that nitrites play an important role in the cardiovascular system. Fennel (Foneiculum vulgare) seeds are often used as mouth fresheners after a meal in both the Indian sub‐continent and around the world. The present study aims to quantify the nitrite and nitrates in fennel seeds as well as elucidating the effect of fennel derived‐nitrites on vascular functions. Results from our study show that fennel seeds contain significantly higher amount of nitrites when compared to other commonly used post‐meal seeds. Furthermore our study confirmed the functional effects of fennel derived‐nitrites using in vitro and ex vivo models that describe the promotion of angiogenesis, cell migration, and vasorelaxation. We also showed that chewing fennel seeds enhanced nitrite content of saliva. Thus our study indicates the potential role of fennel derived‐nitrites on the vascular system. Practical Application: This study is focused on determining the effect of fennel‐derived nitrites on angiogenesis (the formation of new blood vessels from pre‐existing ones), cell migration, and vasorelaxation (dilation of blood vessels) thereby preserving cardiovascular health.     

Design of active reconfigurable wheel antenna based on PIN diodes

In this paper we suggest a reconfigurable wheel antenna based on PIN diodes. The antenna is excited by a single-feed and operates in S-band and X-band. Proposed antenna’s structure is composed of two circular rings that are excited by multiple PIN diodes and microstrip lines. Antenna’s reconfiguration is realized by inserting switches into spokes and peripheral regions of a wheel antenna. The required resonance frequency is provided by combination of the structures which are controlling by PIN diodes. Developed antenna was fabricated on a RT duroid material and its pattern measurements were carried out in the outdoor environment. The measured results have demonstrated antenna’s ability to be reconfigurated and good radiation pattern characteristics within two frequency bands.     

Ultrasound-assisted Acid red dye removal using leather fibre wastes as matrix: ‘intra wastes interaction’ approach

It is desirable to make effective use of solid wastes, as well as waste liquors, of the dye house generated from leather processing. The present study deals with the adsorption of Acid red 26 (Xylidine ponceau) dye using leather fibre waste (buffing dust) as substrate matrix by the means of ultrasound, magnetic stirring and conventional heating. The research examined the effect of various process parameters: ultrasonic power, concentration of dye, temperature and time. The dye uptake data have been fitted with Freundlich and Langmuir isotherms, indicating a useful dye adsorption process. A mechanism for dye adsorption in leather fibres has also been proposed. This study shows that it is possible to remove dyes from dye house effluent streams using leather waste fibres of buffing dust by means of ultrasound. Two different toxic wastes produced by the same industry can be effectively contained. This ‘Intra wastes interaction’ approach could reduce the burden of discarding wastes of other materials in the leather industry.     

White light emission from Eu co-activated Ca2Gd8Si6O26:Dy nanophosphors by solvothermalsynthesis

Ca₂Gd₈(SiO₄)₆O₂ (CGS) nanophosphors with different concentrations of single-doped Dy³⁺ ions and co-doped Dy³⁺/Eu³⁺ ions were prepared by a solvothermal synthesis. Very fine particles in the nanometer range could be achieved by this method, as evidenced by transmission electron microscope measurements. The hexagonal phase of the oxyapatite structure was confirmed by X-ray diffraction patterns. The energy transfer between Eu³⁺ and Dy³⁺ ions was investigated by photoluminescence excitation and emission properties. These phosphors had absorption bands in the UV and NUV region, which are suitable for the emission wavelength of UV or NUV light-emitting diodes (LEDs). With increasing the Eu³⁺ ion concentration, the emission peak intensity corresponding to the ⁵D₀→⁷F₂ transition increased and the yellow (⁴F_9/2→⁶H_13/2) emission intensity also increased compared to the blue (⁴F_9/2→⁶H_15/2) emission intensity due to the increased energy transfer between Dy³⁺ to Eu³⁺ ions. Thus, the Eu³⁺ ions compensated the red emission component of the Dy³⁺ doped CGS nanophosphors. Such phosphors are expected to have potential applications for NUV based white LEDs.