EFFECTS OF GRINDING AIDS VIBRATION MILLING OF ALUMINUM

Fine aluminum powder is widely used in making paints, printing inks, slurry explosives, pyrotechnic chemicals etc. Hence the production of aluminum powder is highly important. In this paper the effect of grinding aids on the grinding characteristics of aluminum in a vibration mill under an inert atmosphere of nitrogen has been investigated. It is found that the use of grinding aids is essential in grinding of atomized aluminum. Among four different grinding aids, stearic acid appears to be the best grinding aid.     

Comments on "Wide-band diffraction improved dual-shaped reflectors"

It is pointed out that the procedure mentioned in the above paper need not be followed for dual-reflector systems using small subreflectors. In addition, a uniform procedure suitable for both large and small subreflector systems, is presented.     

GTD analysis of a hyperboloidal subreflector with conical flange attachment

A geometrical theory of diffraction (GTD) analysis of the principal plane far-field radiation patterns of a hyperboloidal subreflector with a conical flange attachment (HWF) fed by a primary feed located at its focus is presented. While using the uniform geometrical theory of diffraction (UGTD) for evaluating the nonaxial fields, the method of equivalent currents is used in the axial region. In this paper, both the diffraction by the wedge formed between the hyperboloid and the conical flange and the diffraction by the edge of the flange are considered. While considering the diffraction by the edge due to the diffracted ray from the wedge in theH-plane, the slope diffraction technique has been used. The computed diffracted farfields of a typical HWF illuminated by a high performance primary feed shows good agreement with the available measured data and with the results based on the method of physical optics (PO). The sharp cutoff and the low spillover characteristics of the HWF are highlighted by comparing its radiation pattern with that of a hyperboloid without a flange. Further, the effects of the different parameters of the HWF on its radiation pattern are also studied and plotted, so that these results can be utilized in the design of the HWF for a specific requirement.     

GTD analysis of the radiation patterns of a prime focus paraboloid with shroud

The uniform geometrical theory of diffraction (UGTD) is employed to analyze the far-field radiation patterns of a prime focus paraboloid with a cylindrical shroud. The blockage of the aperture illumination of the dish by the gooseneck and the primary feed is also taken into account in the analysis. Far-field radiation patterns (for0degleqTheta leq 180deg), calculated for a typical prime focus paraboloid with 2 m aperture diameter, designed and fabricated, are compared with the experimentally derived patterns at 8.8 GHz in theE- andH-planes. There is a satisfactory agreement between the two results.     

Monte Carlo-based inverse model for calculating tissue optical properties. Part I: Theory and validation on synthetic phantoms

A flexible and fast Monte Carlo-based model of diffuse reflectance has been developed for the extraction of the absorption and scattering properties of turbid media, such as human tissues. This method is valid for a wide range of optical properties and is easily adaptable to existing probe geometries, provided a single phantom calibration measurement is made. A condensed Monte Carlo method was used to speed up the forward simulations. This model was validated by use of two sets of liquid-tissue phantoms containing Nigrosin or hemoglobin as absorbers and polystyrene spheres as scatterers. The phantoms had a wide range of absorption (0-20 cm(-1)) and reduced scattering coefficients (7-33 cm(-1)). Mie theory and a spectrophotometer were used to determine the absorption and reduced scattering coefficients of the phantoms. The diffuse reflectance spectra of the phantoms were measured over a wavelength range of 350-850 nm. It was found that optical properties could be extracted from the experimentally measured diffuse reflectance spectra with an average error of 3% or less for phantoms containing hemoglobin and 12% or less for phantoms containing Nigrosin.     

Monte Carlo-based inverse model for calculating tissue optical properties. Part II: Application to breast cancer diagnosis

The Monte Carlo-based inverse model of diffuse reflectance described in part I of this pair of companion papers was applied to the diffuse reflectance spectra of a set of 17 malignant and 24 normal-benign ex vivo human breast tissue samples. This model allows extraction of physically meaningful tissue parameters, which include the concentration of absorbers and the size and density of scatterers present in tissue. It was assumed that intrinsic absorption could be attributed to oxygenated and deoxygenated hemoglobin and beta-carotene, that scattering could be modeled by spheres of a uniform size distribution, and that the refractive indices of the spheres and the surrounding medium are known. The tissue diffuse reflectance spectra were evaluated over a wavelength range of 400-600 nm. The extracted parameters that showed the statistically most significant differences between malignant and nonmalignant breast tissues were hemoglobin saturation and the mean reduced scattering coefficient. Malignant tissues showed decreased hemoglobin saturation and an increased mean reduced scattering coefficient compared with nonmalignant tissues. A support vector machine classification algorithm was then used to classify a sample as malignant or nonmalignant based on these two extracted parameters and produced a cross-validated sensitivity and specificity of 82% and 92%, respectively.     

Sequential estimation of optical properties of a two-layered epithelial tissue model from depth-resolved ultraviolet-visible diffuse reflectance spectra

A method for estimating the optical properties of two-layered media (such as squamous epithelial tissue) over a range of wavelengths in the ultraviolet-visible spectrum is proposed and tested with Monte Carlo modeling. The method first used a fiber-optic probe with angled illumination and the collection fibers placed at a small separation (or=1000 microm) was used to detect diffuse reflectance preferentially from the bottom layer. A second Monte Carlo-based inverse model for a two-layered medium was applied to estimate the bottom layer optical properties, as well as the top layer thickness, given that the top layer optical properties have been estimated. The results of Monte Carlo validation show that this method works well for an epithelial tissue model with a top layer thickness ranging from 200 to 500 microm. For most thicknesses within this range, the absorption coefficients were estimated to within 15% of the true values, the reduced scattering coefficients were estimated to within 20% and the top layer thicknesses were estimated to within 20%. The application of a variance reduction technique to the Monte Carlo modeling proved to be effective in improving the accuracy with which the optical properties are estimated.     

Thermal properties and performance of carbon fiber-based ultra-high temperature ceramic matrix composites (Cf-UHTCMCs)

The thermophysical properties of carbon fiber-based ultra-high temperature ceramic matrix composites have been determined to aid designers who need these properties when considering using the composites in ultra-high temperature aerospace applications. The coefficient of thermal expansion (CTE) and thermal diffusivity of the composites were measured parallel and perpendicular to the ply direction; the thermal conductivity was measured using the laser-flash method and the heat capacity calculated from the relationship between the thermal diffusivity, density, and thermal conductivity. Both the CTE and thermal conductivity showed higher values across the ply and increased with increasing temperature as expected, whilst the thermal diffusivity showed higher values parallel to the ply and increased smoothly with temperature. In addition, two different but related oxyfuel torch tests, based on oxyacetylene and oxypropane, were used to evaluate the thermo-ablation behavior of the composites. The tests showed how good the composites were at withstanding the ultra-high temperatures, high heat fluxes, and gas velocities involved.     

Experimental Verification of the Lateral Periodicity of Axially Periodic Incoherent Fields Using the Lau Effect

Abstract

‘General’ objects, which are specially prepared to possess restricted spatial frequency spectra, have been used in the conventional Lau experiment to obtain experimental proof for the existence of lateral periodicity arising from axial periodicity, for a subclass of axially periodic wavefields in an incoherent situation.     

Enhanced electrooxidation of methanol,ethylene glycol,glycerol, and xylitol over a polypyrrole/manganese oxyhydroxide/palladium nanocomposite electrode

A small quantity of palladium metal (Pd, 5 wt%) nanoparticles supported by a polypyrrole/manganese oxyhydroxide (PPy/MOH) nanocomposite was developed and investigated as an electrocatalyst for the alcohol electrooxidation reaction in alkaline media. In voltammetric studies, the PPy/MOH/Pd catalyst, compared to C/Pd, exhibited improved electrocatalytic activity for methanol electrooxidation. The peak current density ratios (j ^f/j ^b) for the C/Pd and PPy/MOH/Pd nanocomposite electrodes were 0.67 and 2.43, respectively, indicating that the PPy/MOH/Pd nanocomposite electrode was much more resistant to catalytic poisoning. The electrooxidation of ethylene glycol (EG), glycerol, and xylitol was also tested using the PPy/MOH/Pd nanocomposite electrode. Among these alcohol electrooxidations, that of EG exhibited the maximum power density of 430 mA cm^?2. The intermediates formed during the electrooxidation reactions were removed by increasing the upper sweep potential from +0.2 to +1.0 V. The catalytic performance of the PPy/MOH nanocomposite is discussed in detail. The study results demonstrate that PPy/MOH acts as a superior catalytic supporting material for alcohol electrooxidation reactions in alkaline media.