Mechanical and dry sliding wear characterization of epoxy–TiO2 particulate filled functionally graded composites materials using Taguchi design of experiment

Titania (TiO₂) reinforced homogeneous and functionally graded epoxy composites are developed by simple mechanical stirring and vertical centrifugal casting technique respectively. Investigations on mechanical and wear characteristics of TiO₂ reinforced homogeneous epoxy composites and its functionally graded composite materials developed for tribological applications are presented. The effect of various operational variables, material parameters and their interactive influences on specific wear behaviour of these composites has been studied systematically. A series of test are conducted on a pin-on-disc machine with three sliding velocities of 105, 209 and 314 cm/s under three different normal loading of 20 N, 30 N and 40 N. Out of all samples 20 wt.% epoxy–TiO₂ epoxy graded composites exhibited lowest specific wear rate TiO₂ particle additions on epoxy graded composites have a dramatic effect on the flexural strength, tensile modulus and impact strength in comparison to homogeneous composites. Scanning electron microscope (SEM) observations also indicate that in homogeneous composites TiO₂ particles are peeled off from the matrix to form holes while in graded composite materials under same experimental conditions the TiO₂ particles remain quite intact to the matrix.     

Prediction of Bulk Metallic Glass Formation in Cu–Zr–Ag–Hf System by Thermodynamic and Topological Modeling

Cu based bulk metallic glasses (BMGs) are widely studied because of their high glass forming ability (GFA) and interesting combination of properties such as high strength coupled with good ductility and low cost. With these attributes, Cu based BMGs are being projected as promising materials for practical applications. The process of glass formation in metallic systems is a challenging task and alloys should be cooled from the liquid state at rates faster than a critical cooling rate (R_c) to resist crystallization. Interestingly, composition plays an important role in achieving easy glass formation, which is usually measured in terms of R_c. In the present work, attempt has been made to identify the composition for easy glass formation in Cu based quaternary system by theoretical approach. A GFA parameter P_HS, which is a product of enthalpy of chemical mixing (?H_chem) and mismatch entropy normalized with Boltzmann??s constant (?S_??/k_B) is used to identify the best glass forming composition in Cu?CZr?CAg?CHf system. Further, a new parameter P_HSS, which is a product of P_HS and configurational entropy (??S_config/R) is found to illustrate strong correlation with GFA. An attempt has also been made to correlate P_HSS parameter with critical diameters and R_c using reported data in Cu?CZr?CAg?CHf system.     

Environmental impact assessment of river valley projects in upper Teesta basin of Eastern Himalaya with special reference to fish conservation: a review

Teesta river basin in Eastern Himalaya is being subjected to cascade hydropower development. To assess the impacts of this developmental activity on fish fauna of the basin, fish habitats of the four largest tributaries in the basin were selected for the present study. A total of 18 large hydroelectric projects are planned on these rivers. Here, a total of 11 EIAs and 2 carrying capacity studies in Teesta basin were reviewed. Our investigations show that after commissioning all the projects, 52–88% of the free-flowing river stretches will be diverted and 7.6–24% of the riverine ecosystems will be converted into semi lacustrine ecosystems in different rivers. The cascade hydropower development is likely to affect more than 100 fish species. All the EIA reports reviewed have investigated fish species richness, impacts on fish fauna and fishery management plans. EIA studies and management plans, however, do not adequately address important ecological and conservation issues due to various limitations. An integrated fish conservation plan for the upper Teesta basin is suggested in this contribution.     

Enhanced microwave processing of epoxy nanocomposites using carbon black powders

The conversion of electromagnetic energy into heat depends largely on the dielectric properties of the material being treated. Therefore, the knowledge of dielectric properties of the test specimen is required in order to understand the extent of curing using microwaves. In this study, a detailed investigation is carried out by considering a number of carbon black (CB) samples having particulate sizes in the range of 15–65 nm. The dielectric properties of the synthesized CB/epoxy nanocomposites, before and after microwave curing, are measured using the advanced cavity perturbation method (CPM). It is observed that the CB/epoxy nanocomposite having smallest particulate size i.e., 15 nm attains the maximum value of dielectric constant (ε_r′) and loss tangent (tan δ) of 10.79 and 0.05, respectively. These results indicate that the epoxy reinforced with the CB having least particulate size would interact more effectively with microwaves, which are confirmed by the experimental data showing that the nanocomposite with smallest CB particle size of 15 nm requires the minimum curing time. The dielectric properties especially the loss factors of fully cured samples are found to decrease after curing indicating that the dielectric properties of post cured samples can provide an idea about the extent of curing. At last, thermal, mechanical and morphological analyses are also performed on all the microwave cured epoxy samples.     

Criteria for Crack Deflection-Penetration in EBC Coated Ceramics: A Parametric Study

This article discusses results obtained from a parametric study to analytically evaluate the impingement of a crack at the interface of an environmental barrier coating (EBC) and a monolithic Silicon nitride (Si₃N₄) layered ceramics substrate. The study establishes a correlation that leads to determine if the crack is arrested or advanced by either penetrating or deflecting along the EBC/substrate interface. A finite-element-based fracture mechanics methodology is utilized to perform these calculations. Critical parameters determining penetration-deflection conditions in relation to EBC's physical characteristics, such as porosity level, voids, and mini cracks, are determined for a single layer and multi-layered coating system coordinating the interactions between the EBCs (Mullite, Mullite mixture, Silicon nitride, etc.) and the substrate structure. Results showing thermo-mechanical stresses and stress/strain energy release relations with respect to crack penetration-deflection are presented and discussed as the crack is advanced.     

Acetate Treatment Increases Fatty Acid Content in LPS-Stimulated BV2 Microglia

Acetate supplementation increases plasma acetate, brain acetyl-CoA, histone acetylation, phosphocreatine levels, and is anti-inflammatory in models of neuroinflammation and neuroborreliosis. Although radiolabeled acetate is incorporated into the cellular lipid pools, the effect that acetate supplementation has on lipid deposition has not been quantified. To determine the impact acetate-treatment has on cellular lipid content, we investigated the effect of acetate in the presence of bacterial lipopolysaccharide (LPS) on fatty acid, phospholipid, and cholesterol content in BV2 microglia. We found that 1, 5, and 10 mM of acetate in the presence of LPS increased the total fatty acid content in BV2 cells by 23, 34, and 14 % at 2 h, respectively. Significant increases in individual fatty acids were also observed with all acetate concentrations tested with the greatest increases occurring with 5 mM acetate in the presence of LPS. Treatment with 5 mM acetate in the absence of LPS increased total cholesterol levels by 11 %. However, neither treatment in the absence of LPS significantly altered the content of individual phospholipids or total phospholipid content. To determine the minimum effective concentration of acetate we measured the time- and concentration-dependent changes in histone acetylation using western blot analysis. These studies showed that 5 mM acetate was necessary to induce histone acetylation and at 10 mM acetate, the histone acetylation-state increased as early as 0.5 h following the start of treatment. These data suggest that acetate increases fatty acid content in LPS-stimulated BV2 microglia that is reflected by an increase in fatty acids esterified into membrane phospholipids.     

Creep properties of melt infiltrated SiC/SiC composites with Sylramic™-iBN and Hi-Nicalon™-S fibers

Isothermal tensile creep tests were conducted on 2D woven and laminated, 0/90 balanced melt infiltration (MI) SiC/SiC composites at stress levels from 48 to 138 MPa and temperatures to 1400°C in air. Effects of fiber architecture and fiber types on creep properties, influence of accumulated creep strain on in-plane tensile properties, and the dominant constituent controlling the creep behavior and creep rupture properties of these composites were investigated. In addition, the creep parameters of both composites were determined. Results indicate that in 2D woven MI SiC/SiC composites with Sylramic™-iBN or Hi-Nicalon™-S fibers, creep is controlled by chemical vapor infiltration (CVI) SiC matrix, whereas in 2D laminated MI SiC/SiC composites with Hi-Nicalon™-S fibers, creep is controlled by the fiber. Both types of composites exhibit significant variation in creep behavior and rupture life at a constant temperature and stress, predominantly due to local variation in microstructural inhomogeneity and stress raisers. In both types of composites at temperatures >1350°C, residual silicon present in SiC matrix to reacts with SiC fibers and fiber coating causing premature creep rupture. Using the creep parameters generated, the creep behaviors of the composites have been modeled and factors influencing creep durability are discussed.     

Studies on electrical properties of wheat bread as a function of moisture content during storage

Bread undergoes several physicochemical changes during storage that results in a rapid loss of freshness. These changes depend on the moisture content present in the bread product and collectively termed as staling. The present work explains how the electrical properties of bread vary with time and moisture content at its crust and crumb. An instrument based on electrical impedance spectroscopy with multichannel electrodes is developed for the present investigations. Detailed studies have been carried out to understand the influence of changes in moisture profile at bread crust and crumb in terms of electrical properties during the storage of 120 h. A linear relationship is observed between the measured impedance and capacitance and residual moisture content in bread at crust during storage. It is observed that the measured Resistance at bread crumb has a nonlinear mathematical relationship with moisture content present at crumb.     

An efficient one pot synthesis of water-dispersible calix[4]arene polyhydrazide protected gold nanoparticles--a "turn off" fluorescent sensor for Hg[II] ions

In the present study, we report the synthesis of aqueous stable gold nanoparticles by using calix[4]arene polyhydrazide (CPH) as both reducing and capping agents. The calix[4]arene polyhydrazide reduced gold nanoparticles (CPH-AuNps) were characterized by UV/Vis, particle size analyzer (PSA) and transmission electron mictroscopy (TEM). The records confirmed high stability of CPH-AuNps in aqueous solution over a long period of time and even at varied pH. Additionally, CPH-AuNps have been investigated for its application as "Turn Off" fluorescent sensor for Hg[II]. A concentration of Hg[II] in the limit of 10 nM to 10 microM can be detected based on fluorescence quenching of the CPH-AuNPs and it was also concluded from the spectroscopic data that CPH-AuNPs possess excellent selectivity to Hg[II] over several metal ions like Pb[II], Cu[II], Cd[II], Mn[II], Zn[II] and Ni[II].