Simultaneous spectrophotometric determination of copper(II), lead(II) and cadrnium(II)

The full spectrum technique in the fourier domain was studied for simultaneous determination of Cu(II), Pb(II) and Cd(II) with 4-(2-pyridylazo) resorcinol (PAR). A program called SPGRFSQ. was designed to perform the calculations. Seven error functions were calculated for deducing the number of factors. Data reduction was performed using principal component analysis (PCA) algorithm. Experimental results showed the method to be successful even where there was severe overlap of spectra.     

发电系统短期可靠性评估的等效机组法

本文提出了等效机组的概念,有效地解决了发电系统短期可靠性评估中的“状态爆炸”难题该方法不仅提高了短期可靠性评估的速度和精度,而且极大地压缩了计算存贮量,使发电系统短期可靠性评估更趋于实用化.通过对示例发电系统进行短期可靠性评估,其结果证明了该方法的正确性和有效性.     

Global Avalanche Characteristics of Boolean Functions by Concatenation

In order to measure the correlation propeties of two Boolean functions,the global avalanche characteristics of Boolean functions constructed by concatenation are discussed,i.e.,f_1‖f_2and f_1‖f_2‖f_3‖f_4.Firstly,for the function f = f_1‖f_2,the cross-correlation function of f_1,f_2 in the special condition are studied.In this case,f,f_1,f_2 must be in desired form.By computing their sum-of-squares indicators,the crosscorrelation function between f_1,f_2 is obtained.Secondly,for the function g = f_1‖f_2‖f_3‖f_4,by analyzing the relation among their auto-correlation functions,their sum-of-squares indicators are investigated.Based on them,the sum-of-squares indicators of functions obtained by Canteaut et al.are investigated.The results show that the correlation property of g is good when the correlation properties of Boolean functions f_1,f_2,f_3,f_4 are good.     

TEM IMAGING TECHNIQUE

This imaging technique is used for approximate interpretation of TEM data including ungrounded loopsource and grounded line source soundings.Loop source data can be collected as central-loop soundings or asout-of-loop soundings with a short or long offset configuration.The imaging method is based on the same princi-ple as that employed by Fullager(1989),with apparent resistivities computed directly from time-derivative data,db/d,and then associated with depths according to image theory.     

Effect of Ce(3+) on soluble microbial products production in anaerobic granular sludge digestion

Upflow anaerobic sludge bed reactors fed on glucose were used to investigate the effects of Ce(3+) on soluble microbial products (SMP) production, which is the majority of the residual chemical oxygen demand present in the effluent. It was found that Ce(3+) concentration of 0.05 mg/L had no significant effect on the amount of SMP production, whereas that of 1 mg/L led to the increase in SMP production. The molecular-weight distribution and carbohydrate analysis indicated that an increase in SMP production may be partly attributed to the release of extracellular polymeric substances (EPS) into the bulk solution resulted from cerium toxicity, and the nucleic acids analysis suggested that increased cell lysis also contributed to SMP accumulation in the presence of Ce(3+). The increase in SMP production in the presence of Ce(3+) is possibly a consequence of the release of EPS and increased cell lysis due to cerium toxicity.     

安钢SAP预留系统的开发与应用

本文简述了安钢信息化建设概况,介绍了安钢信息化建设中开发SAP预留系统的设计流程,阐述了预留系统实现的功能.     

计算机及网络技术与现代继续临床医学教育

计算机网络技术是现代信息技术的核心内容,其运用于现代临床医学教育前景广阔,不但适用范围广,教学效率也相当的高。计算机多媒体是现代临床教学的重要手段,而网络技术的使用特使教学内容噩方式发生根本性变革。根据目前计算机技术已深入到医学诊断、治疗及科研领域且发展迅速的现状,提出在继续医学教育中开展计算机知识学习的问题,并针对不同年龄段卫生工作者的具体情况进行了探讨并提出了相应的对策,这对于提高卫生工作者的综合素质也有着重要的意义。     

一种基于小波变换的脉搏波速度测量方法

动脉脉搏波速度变化是动脉血管病变的指示剂,因此脉搏波速度的检测对血管疾病的预防和治疗有很大的帮助作用.脉搏波中夹杂的各种噪声干扰会影响测量结果精度.利用小波变换可以去除脉搏波中的各种干扰,实现波形的平滑重构,为提高测量精度打下基础.脉搏波波速的测量精度在很大程度上取决于波速参考点的提取,首次采用二次差分峰值点作为波速参考点,提高了测量精度.临床实验证明,新方法能够有效地分析出脉搏波速度,有助于动脉血管弹性程度的辅助诊断.     

基于ARM和MiniGUI的呼气式酒精测试仪研究

设计了一种以ARM7微控制器LPC2210为核心的燃料电池型呼气式酒精测试仪;该仪器在LPC2210上移植嵌入式操作系统uClinux,利用燃料电池传感器的输出电压与酒精浓度的相关性,通过采集燃料电池传感器中酒精气体反应产生的模拟信号计算出酒精浓度;详细介绍了燃料电池传感器的电化学原理,及在ARM-Linux嵌入式操作系统环境下,利用轻量级的图形用户界面支持系统MiniGUI进行软件界面开发的方法,提高了人机交互友好性和易操作性;实验表明,该酒精测试仪具有稳定性好、精度高、抗干扰性强的明显优点。     

Computational simulation of Belousov–Zhabotinskii oscillating chemical reaction

The suitability of computational simulation of the Belousov–Zhabotinskii oscillating chemical reaction by differential kinetic methodology for resolving nonlinear multi-component system is demonstrated in this work. According to the Field–KÖrÖs–Noyes mechanism and the Oregonator model, the change of the concentrations of HBrO₂, bromide ion and cerium ion are simulated. The results of computational simulation are consistent with experimental results very well. At the same time, the effect of variables and parameters, especially the rate constant on the oscillation curve, are investigated deeply. A simple method of estimating rate constants is obtained through simulation the concentrations of key components of the system, and then comparison the simulation results with the experimental ones. The reasonable rate constant is also proposed.