心脏黏液瘤的超微结构研究

对8例心脏黏液瘤进行了临床病理总结，着重进行了超微结构的研究，结果表明黏液瘤细胞有4种超微结构表现：（1）原始间叶细胞；（2）纤维母细胞样；（3）肌纤维母细胞样；（4）上皮样。提出心脏黏液瘤细胞起源于原始间叶细胞，有纤维母细胞、肌及上皮样分化。并且提出瘤细胞参与黏液瘤基质的形成。     

36 m 高砖砌水塔定向折叠爆破拆除

介绍了复杂环境中砖砌高大水塔的定向折叠爆破拆除.根据周围的环境情况,在施工中采用了开定向窗、挖定位坑等技术措施,确保爆破成功,达到了设计效果.     

ATM突发性业务阻塞控制

在ＡＴＭ网里业务阻塞控制是一个十分重要的问题，本文对一种缓冲漏桶业务阻塞控制算法在突发性业务输入情况下的性能进行了计算机模拟分析，模拟结构表明缓冲漏桶算法是一种适合于突发性业务的阻塞控制算法，文章在模拟结果的基础上给出了缓冲漏桶算法中参量选择的算法。     

Flammability and thermal stability studies of ABS/Montmorillonite nanocomposite

Acrylonitrile–butadiene–styrene (ABS)/montmorillonite nanocomposites have been prepared using a direct melt intercalation technique by blending ABS and organophilic clay of two different particle sizes: OMTa (5 µm) and OMTb (38 µm). Their structure and flammability properties were characterized by X‐ray diffraction, high resolution electronic microscopy (HREM), thermogravimetric analysis (TGA) and cone calorimeter experiments. The results of HREM showed that ABS/5 wt% OMTa nanocomposite was a kind of intercalated–delaminated structure, while ABS/5 wt% OMTb nanocomposite was mainly an intercalated structure. The nanocomposites showed a lower heat release rate peak and higher thermal stability than the original ABS by TGA and cone calorimeter experiments. Also, the intercalated nanocomposite was more effective than an exfoliated–intercalated nanocomposite in fire retardancy. Copyright © 2003 Society of Chemical Industry     

发光体MAl2O4:Eu2+,RE3+的长余辉形成机理

提出了Eu^2 激活的MAl2O4:Eu^2 ,RE^3 （M＝Ca,Sr,Ba;RE=Dy,Nd,Ho,Er,Pr,Tb等稀土元素）系列铝酸盐发光体的长余辉发光机理。认为O^2-空位Vo是一种电子俘获陷际，是形成余辉的根本原因，RE^3 的引入使陷阱深度适宜而使余辉时间延长。缺陷在晶格中成簇分布，Vo和碱土金属离子空位VM在高温下可相互缔合。利用电子陷阱模型解释了实验中的一些普遍现象并提出了固相反应法合成此类发光体的工艺改进措施。     

Effect of polymerization conditions on o‐phenylenediamine and o‐phenetidine oxidative copolymers

A series of new o‐phenylenediamine (OPD)/o‐phenetidine (PHT) copolymers with partly phenazine‐like structures has been successfully synthesized at three polymerization temperatures by chemically oxidative polymerization in four different polymerization media. The molecular structures and properties of the resulting OPD/PHT polymers were investigated by IR, UV–vis and high‐resolution ¹H NMR spectroscopies, and DSC, in order to ascertain the effect of reaction temperature, comonomer ratio and acid medium. The copolymerization mechanism of OPD with PHT monomers has been proposed. It is found that the statistical OPD/PHT copolymer obtained at a temperature of 118 °C has a higher degree of polymerization than that obtained at 12–17 °C. The OPD content in the copolymers calculated from NMR spectroscopic analysis is higher than that in the feed OPD content, whereas the OPD content calculated from element analysis is slightly lower than the feed OPD content. It can be predicted that denitrogenation takes place in the OPD units during the polymerization process at OPD/PHT molar ratios of 90/10 and 100/0. These OPD/PHT copolymers exhibit a much better solubility than the OPD homopolymer, hence suggesting an incorporation of PHT units into the phenazine structure of the homopolymer. The thermal behavior of the copolymers was also studied. Copyright © 2004 Society of Chemical Industry     

人工神经网络在单晶合金设计中的应用

把一种新发展的功能极强的信息处理技术－计算机人工神经网络技术用于单晶合金的高温持久性能预测并和其它方法进行比较，结果表明：这种方法精度最高。     

适配器强度有限元分析

使用有限元程序ＳＡＰ５对某新型导弹发射筒内的适配器的强度进行了计算。通过结果分析，找出了适配器危险应力点的分布规律，它对结构选型设计具有指导意义。