转换波延迟时静校正

为了克服传统转换波静校正方法应用效果不佳的缺点,本文介绍一种转换波延迟时静校正方法,此法根据转换波勘探时垂直分量记录的纵波近地表模型及水平分量记录的初至时与纵波分量的初至时之差,求取转换波延迟时,并根据转换波延迟时建立横波的近地表模型,从而求取接收点的横波静校正量。文中给出了转换波延迟时静校正量的计算公式,并用实际地震数据进行了检验。结果表明此法应用效果较好,可以推广应用。目前该静校正方法已经集成到KLSeis采集软件中。     

复杂深井尾管固井及回接技术实践

尾管悬挂固井是一种工程经济效益较高、注水泥环空阻力较低且有利于改善套管柱轴向设计和再钻进水力条件的固井方法，常常应用于深井超深井的固井作业。鄯科1井是一口科学探索井，完井尾管具有井径极不规则（实测井径扩大率最大为139.82%，最小为－6.02%）、施工压力高（15~20 MPa）、封固段长（考虑水泥余量的情况下封固段可长达1500 m）和尾管回接固井要求封固两头且不使用分级注水泥等难点。文章针对固井难点，总结出一套适用于复杂深井尾管及其回接固井的优化设计关键技术，它主要包括管串选择、套管扶正器加法、水泥浆体系优选、施工压力校核和配套工艺措施。实践证明，这些技术对类似井的固井作业具有实际的参考价值。     

应用多抽样率信号处理实现SSB调制信号

在探讨了软件无线电的基本概念,基于软件无线电定义的发射平台结构及多抽样率数字信号处理的基本内容的基础上,着重探讨了软件无线电发射平台中多抽样率数字信号处理的应用,并以单边带调制信号(SSB)为例,指出与传统SSB产生方法不同的结构。     

Is the Promissory Note of Personality as Vulnerability to Depression in Default? Reply to Zuroff, Mongrain, and Santor (2004).

In contrast to D. C. Zuroff, M. Mongrain, and D. A. Santor (2004), the current authors find the promissory note of dependency-sociotropy (DEP-SOC) and self-criticism-autonomy (SC-AUT) as a model of risk for depression to be in default. The authors propose reorganizing what has been cast as unitary effort into 3 distinct endeavors: a psychoanalytic clinical theory, development of a refined empirical model of risk for clinical depression, and research examining the effects of DEP-SOC and SC-AUT on interpersonal relationships in nonclinical samples. The authors identify some issues that need to be accommodated regardless of whether the assessment of Zuroff et al. (2004) or their own is accepted. DEP-SOC and SC-AUT are best construed as correlated, continuous dimensions. Future work also needs to accommodate depression as chronic recurrent condition, advances in developmental psychopathology, and more stringent criteria for positing a risk factor for clinical disorder. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

光场力对烧蚀物时空分布的影响

对烧蚀物的时空分布进行了研究。烧蚀物离开靶材表面时的速率分布由蒸发机制决定,在激光作用时间内烧蚀物的传输行为由扩散机制和光场力机制共同决定,激光作用结束后烧蚀物的传输行为由扩散机制单独决定,并解释了烧蚀物的时空分布及烧蚀物趋光运动的现象。     

Direct recursive structures for computing radix-r two-dimensional DCT/IDCT/DST/IDST

In this paper, new recursive structures for computing radix-r two-dimensional (2-D) discrete cosine transform (DCT) and 2-D inverse DCT (IDCT) are proposed. The 2-D DCT/IDCT are first decomposed into cosine-cosine and sine-sine transforms. Based on indexes of transform bases, the regular pre-addition preprocess is established and the recursive structures for 2-D DCT/IDCT, which can be realized in a second-order infinite-impulse response (IIR) filter, are derived without involving any transposition procedure. For computation of 2-D DCT/IDCT, the recursive loops of the proposed structures are less than that of one-dimensional DCT/IDCT recursive structures, which require data transposition to achieve the so-called row-column approach. With advantages of fewer recursive loops and no transposition, the proposed recursive structures achieve more accurate results and less power consumption than the existed methods. The regular and modular properties are suitable for very large-scale integration (VLSI) implementation. By using similar procedures, the recursive structures for 2-D DST and 2-D IDST are also proposed.     

Livsic theorems,maximizing measures and the stable norm

In this paper we consider two results motivated by Livsic's well-known theorem that, for a hyperbolic system, a Hölder continuous function is determined, up to a coboundary, by its values around closed orbits. The first result relates to negative values around orbits and the second result to values for finitely many orbits. We also present some new results on maximizing measures and the boundary of the unit ball in the stable norm for a surface.     

成形工艺对快速凝固Al—Cu—Mg合金组织和性能的影响

采用自制离心雾化装置制取了快速凝固LY12硬铝合金粉末,研究了以该粉末制成的真空热压件和挤压丝材的组织和性能。结果表明,所得粉末为泪滴状,其显微组织为树枝状晶和胞状晶。真空热压件密度高时所对应的强度高。450℃、10min、150MPa为较合理的工艺,此时粉末颗粒间结合密实,晶粒尺寸没有明显改变。在500℃热挤压时,挤压丝的组织已发生了再结晶,晶粒尺寸仍较细小。挤压丝材的抗拉强度达460MPa,其断口为韧窝状,韧窝尺寸小于3μm,且分布均匀。     

主轴回转精度测试中的多圈数据采集及处理

本文就主轴回转精度测试中的多圈数据采集和处理方法作了探讨。根据提出的方法和改进后的测试系统编制了实用程序,进行了实测,获得了测试结果。