Photocatalytic activity and OH radical formation on TiO2 in the relation to crystallinity

Two types of TiO₂ samples, ST-01 (Ishihara-Sangyo, Japan) and A11 precursor (Police, Poland), were heat-treated at 400–1000 °C and characterized by the phase composition, crystallite size and lattice strain. These TiO₂ samples were tested for methylene blue (MB) decomposition and OH radical formation. Through heating TiO₂ up to 700 °C for 1 h the single anatase phase was remained, which had improved crystallinity, large crystallite size and very small lattice strain. By extending the calcination time up to 2–5 h, the anatase phase partially transformed to rutile phase, much faster by A11 precursor than by ST-01. Transformation of anatase phase to rutile reduced the rate of methylene blue decomposition, although OH radical formation was the highest in the samples having around 9 mass% of rutile. However, methylene blue decomposition not only depended on OH radical formation on TiO₂ particles, but also the content of even small amount of rutile in TiO₂ reduces markedly the rate of methylene blue decomposition.     

Feasibility of direct oxygenation of primary-cultured rat hepatocytes using polyethylene glycol-decorated liposome-encapsulated hemoglobin (LEH)

We tested the short-term efficacy of liposome-encapsulated hemoglobin (LEH) in cultured rat hepatocytes. Supplementation with LEH (20% of the hemoglobin concentration of blood) did not lower albumin production in static culture, and completely reversed the cell death and deterioration in albumin production caused by an oxygen shortage in 2D flat-plate perfusion bioreactors.     

Preparation and characterization of magnetically separable photocatalyst (TiO2/SiO2/Fe3O4): effect of carbon coating and calcination temperature

TiO2/SiO2/Fe3O4 composite was synthesized by sol-gel technique for silica and titania coatings on magnetite core to enable recovery after photocatalytic degradation. Carbon coating was also carried out by calcination of TiO2/SiO2/Fe3O4 under nitrogen atmosphere in presence of PVA as a source of carbon to enhance the adsorption of organic compounds on catalyst surface and to get better activity. All prepared samples were characterized using EDX, CN analyzer, XRD, BET and SEM. Degradation of methyl orange dye was used to assess the photocatalytic performance of the prepared samples. Calcination temperature was found to affect rate of reaction because of the formation of rutile phase at high calcination temperature. Carbon coated samples unexpectedly exhibited lower rate of reaction at almost all calcination temperatures.     

Evaluation of molecular orientation and alignment of poly(3-hexylthiophene) on Au (111) and on poly(4-vinylphenol) surfaces

The orientation and alignment of regioregular poly(3-hexylthiophene) (P3HT) molecules on Au (111) surface and on poly(4-vinylphenol) (PVP) thin film were investigated. The P3HT molecules on the smooth Au (111) are oriented with both the backbones and the side chains parallel to the substrate (plane-on orientation) as revealed by the scanning tunneling microscope (STM) images. However, the P3HT molecules on the PVP thin films are preferably oriented with side chains perpendicular to the surface (edge-on orientation). Surface modification of the PVP by hexamethyldisilazane (HMDS) can increase the crystalline size in the P3HT semicrystalline films. The performance of an all-polymer organic field-effect transistor (OFET) with the drop-cast P3HT semiconductor layer and the crosslinked PVP gate insulator on poly(ethylene naphthalate) (PEN) substrate was evaluated.     

Engineering a chimeric pyrroloquinoline quinone glucose dehydrogenase: improvement of EDTA tolerance, thermal stability and substrate specificity

An engineered Escherichia coli PQQ glucose dehydrogenase (PQQGDH)with improved enzymatic characteristics was constructed by substitutingand combining the gene-encoding protein regions responsiblefor EDTA tolerance, thermal stability and substrate specificity.The protein region responsible for complete EDTA tolerance inAcinetobacter calcoaceticus, which is recognized as the indicatorof high stability in co-factor binding, was elucidated. Theregion is located between 32 and 59% from the N-terminus ofA.calcoaceticus PQQGDH(A27 region) and also corressponds tothe same position from 32 to 59% from the N-terminus in E.coliPQQGDH, though E.coli PQQGDH is EDTA sensitive. We previouslyreported that the C-terminal 3% region of A.calcoaceticus (A3region) played an important role in the increase of thermalstability, and that His775Asn substitution in E.coli PQQGDHresulted in an increase in the substrate specificity of E.coliPQQGDH towards glucose. Based on these findings, chimeric and/ormutated PQQGDHs, E97A3 H775N, E32A27E41 H782N, E32A27E38A3 andE32A27E38A3 H782N were constructed to investigate the compatibilityof two protein regions and one amino acid substitution. His775substitution to Asn corresponded to His782 substitution to Asn(H782N) in chimeric enzymes harbouring the A27 region. Sinceall the chimeric PQQGDHs harbouring the A27 region were EDTAtolerant, the A27 region was found to be compatible with theother region and substituted amino acid responsible for theimprovement of enzymatic properties. The contribution of theA3 region to thermal stability complemented the decrease inthe thermal stability due to the His775 or His782 substitutionto Asn. E32A27E38A3 H782N, which harbours all the above mentionedthree regions, showed improved EDTA tolerance, thermal stabilityand substrate specificity. These results suggested a strategyfor the construction of a semi-artificial enzyme by substitutingand combining the gene-encoding protein regions responsiblefor the improvement of enzyme characteristics. The characteristicsof constructed chimeric PQQGDH are discussed based on the predictedmodel, ß-propeller structure.     

Stabilization of a high-power diode-side-pumpedintracavity-frequency-doubled CW Nd:YAG laser by compensating forthermal lensing of a KTP crystal and Nd:YAG rods

We have analyzed the stability of a high-power diode-side-pumped intracavity-frequency-doubled CW Nd:YAG laser. It is found that large green power fluctuations observed experimentally are suppressed by compensating thermal lensing of the nonlinear crystal KTP and that of the Nd:YAG rods with an advanced resonator design. Stable CW green powers of 27 W with a beam quality of M²=8 and 16 W with M ²=1.2 (TEM₀₀-mode) were generated     

Elevation of antioxidant potency in the brain of mice by low-dose gamma-ray irradiation and its effect on 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP)-induced brain damage

The elevation of endogenous thiol-related antioxidants and free radical scavenging enzymes in the brain of C57BL/6 female mice after low-dose gamma-ray irradiation and its inhibitory effect on 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP)-induced brain damage were investigated. The brain level of the reduced form of glutathione (GSH) increased soon after irradiation with 50 cGy of gamma-rays, reached a maximum at 3 h post-treatment, and remained elevated until 12 h. Thioredoxin (TRX) was also transiently increased after irradiation. The activities of free radical scavenging enzymes, including Cu/Zn-superoxide dismutase, catalase and glutathione peroxidase, were significantly induced after irradiation as well. Cerebral malondialdehyde was remarkably elevated by MPTP treatment, and this elevation was suppressed by pre-irradiation (50 cGy). The contents of GSH and TRX were significantly decreased by MPTP treatment in comparison with those of the control group. These reductions both seemed to be attenuated by pre-irradiation with gamma-rays. These results suggest that low-dose gamma-ray irradiation induces endogenous antioxidative potency in the brain of mice and might be effective for the prevention and/or therapy of various reactive oxygen species-related neurodegenerative disorders, such as Parkinson's disease and Alzheimer's disease.     

LQ preview synthesis: optimal control and worst case analysis

A generalized LQ-control problem, which treats a mixed attenuation of stored disturbance and initial state uncertainty, is discussed in the infinite-horizon time setting. The posed problem covers a part of predictive control problems and enables one to deal with the LQ optimal preview servocontroller design. For the generalized LQ problem, we first derive an optimal preview control which minimizes the LQ cost functional and provide some interpretations on the structure of resulting control law. We then analyze worst case initial uncertainties, i.e., those of initial state and the shape of stored disturbance, which maximize the cost functional of the resulting closed-loop system     

Spectroscopic measurement of arc plasma diameter in EDM

This paper describes the spectroscopic measurement of arc plasma diameter in EDM. In order to determine the diameter of the arc plasma area where discharge current flows, radial temperature distribution in plasma generated by a single pulse discharge was measured using spectroscopy, and the area with high degree of ionization was determined. It was found that arc plasma completes expanding within a few microseconds after dielectric breakdown, while the diameter of craters grows slowly in comparison with the expanding speed of the arc plasma. This new finding is different from conventional plasma expansion models established based on the observation of generated craters and unproven assumptions. Furthermore, increase in arc plasma diameter with increasing discharge current or gap width was quantified, enabling accurate simulation of discharge crater generation using the newly established heat source model.