The performance of multiwavelets based OFDM system under different channel conditions

In wireless communication reception, the reliability of orthogonal frequency division multiplexing (OFDM) is limited because of the time-varying nature of the channel. This causes inter-carrier interference (ICI) and increases inaccuracies in channel tracking. This can effectively be avoided at the cost of power loss and bandwidth expansion by inserting a cyclic prefix guard interval before each block of parallel data symbols. However, this guard interval decreases the spectral efficiency of the OFDM system as the corresponding amount. Recently, it was found that based on Haar-orthonormal wavelets, discrete wavelet-based OFDM (DWT-OFDM) is capable of reducing the inter symbol interference (ISI) and ICI, which are caused by the loss in orthogonality between the carriers. DWT-OFDM can also support much higher spectrum efficiency than discrete Fourier-based OFDM (DFT-OFDM). In this paper the DFT-OFDM is replaced by Multiwavelets OFDM (DMWT-OFDM) in order to further reduce the level of interference and increase spectral efficiency. It is found that proposed Multiwavelet design achieves much lower bit error rates, increases signal to noise power ratio (SNR), and can be used as an alternative to the conventional OFDM. The proposed OFDM system was modeled tested, and its performance was found under different channel conditions.     

A new mathematical programming approach to multi-group classification problems

In this paper we introduce a goal programming formulation for the multi-group classification problem. Although a great number of mathematical programming models for two-group classification problems have been proposed in the literature, there are few mathematical programming models for multi-group classification problems. Newly proposed multi-group mathematical programming model is compared with other conventional multi-group methods by using different real data sets taken from the literature and simulation data. A comparative analysis on the real data sets and simulation data shows that our goal programming formulation may suggest efficient alternative to traditional statistical methods and mathematical programming formulations for the multi-group classification problem.     

Structure and reversibility of 2D hexagonal cellular automata

Cellular automata are used to model dynamical phenomena by focusing on their local behavior which depends on the neighboring cells in order to express their global behavior. The geometrical structure of the models suggests the algebraic structure of cellular automata. After modeling the dynamical phenomena, it is sometimes an important problem to be able to move backwards in order to understand it better. This is only possible if cellular automata is reversible. In this paper, 2D finite cellular automata defined by local rules based on hexagonal cell structure are studied. Rule matrix of the hexagonal finite cellular automaton is obtained. The rank of rule matrices representing the 2D hexagonal finite cellular automata via an algorithm is computed. It is a well known fact that determining the reversibility of a 2D cellular automata is a very difficult problem in general. Here, the reversibility problem of this family of 2D hexagonal cellular automata is also resolved completely.     

Use of center of gravity with the common vector approach in isolated word recognition

In this paper, the subspace based classifier, common vector approach (CVA), with the center of gravity (COG) method is used for isolated word recognition. Since the CVA classifier is sensitive to shifts through the time axis, endpoint detection becomes extremely important for the recognition of isolated words. The COG method eliminates the need for endpoint detection. The effects of the COG method and a classical endpoint detection algorithm on the recognition rates of isolated words are investigated. The experimental results show that the COG method yields slightly higher recognition rates than the endpoint detection method in the TI-digit database when CVA is used.     

Customized kernel execution on reconfigurable hardware for embedded applications

To conserve space and power as well as to harness high performance in embedded systems, high utilization of the hardware is required. This can be facilitated through dynamic adaptation of the silicon resources in reconfigurable systems in order to realize various customized kernels as execution proceeds. Fortunately, the encountered reconfiguration overheads can be estimated. Therefore, if the scheduling of time-consuming kernels considers also the reconfiguration overheads, an overall performance gain can be obtained. We present our policy, experiments, and performance results of customizing and reconfiguring Field-Programmable Gate Arrays (FPGAs) for embedded kernels. Experiments involving EEMBC (EDN Embedded Microprocessor Benchmarking Consortium) and MiBench embedded benchmark kernels show high performance using our main policy, when considering reconfiguration overheads. Our policy reduces the required reconfigurations by more than 50% as compared to brute-force solutions, and performs within 25% of the ideal execution time while conserving 60% of the FPGA resources. Alternative strategies to reduce the reconfiguration overhead are also presented and evaluated.     

A fuzzy long-term investment planning model for a GenCo in a hybrid electricity market considering climate change impacts

We study the long-term generation capacity investment problem of an independent power generation company (GenCo) that functions in an environment where GenCos perform business with both bilateral contracts (BC) and transactions in the day-ahead market (DAM). A fuzzy mixed integer linear programming model with a fuzzy objective and fuzzy constraints is developed to incorporate the impacts of imprecision/uncertainty in the economic environment on the calculation of the optimal value of the GenCo’s objective function. In formulating the fuzzy objective function we also include the potential impacts of climate change on the energy output of hydroelectric power plants. In addition to formulating and solving the capacity planning/investment problem, we also performed scenario-based (sensitivity) analysis to explore how investment decisions of the GenCos change when fuzziness (tolerance) in the maximum energy output of hydroelectric units and/or drought expectation increases. The proposed model is novel and investigates the effects of factors like drought expectations of climate changes, hydroelectric power plant investments, and other power generation technology investment options.     

Decentralized fault tolerant control of a class of nonlinear interconnected systems

In this paper, a novel decentralized fault tolerant controller (DFTC) is proposed for interconnected nonlinear continuous-time systems by using local subsystem state vector alone in contrast with traditional distributed fault tolerant controllers or fault accommodation schemes where the measured or the estimated state vector of the overall system is needed. The proposed decentralized controller uses local state and input vectors and minimizes the fault effects on all the subsystems. The DFTC in each subsystem includes a traditional controller term and a neural network based online approximator term which is used to deal with the unknown parts of the system dynamics, such as fault and interconnection terms. The stability of the overall system with the proposed DFTC is investigated by using Lyapunov approach and the boundedness of all signals is guaranteed in the presence of a fault. Therefore, the proposed controller enables the system to continue its normal operation after the occurrence of a fault, as long as it does not cause failure or break down of a component. Although the decentralized fault tolerant controller is designed mainly for large-scale systems where continuous transmissions between subsystems is not possible, it can also be applied to small-scale systems where sensor measurements are available for use in all subsystems. Finally the proposed methods are verified and compared in simulation environment.     

SimClus: an effective algorithm for clustering with a lower bound on similarity

Clustering algorithms generally accept a parameter k from the user, which determines the number of clusters sought. However, in many application domains, like document categorization, social network clustering, and frequent pattern summarization, the proper value of k is difficult to guess. An alternative clustering formulation that does not require k is to impose a lower bound on the similarity between an object and its corresponding cluster representative. Such a formulation chooses exactly one representative for every cluster and minimizes the representative count. It has many additional benefits. For instance, it supports overlapping clusters in a natural way. Moreover, for every cluster, it selects a representative object, which can be effectively used in summarization or semi-supervised classification task. In this work, we propose an algorithm, SimClus, for clustering with lower bound on similarity. It achieves a O(log n) approximation bound on the number of clusters, whereas for the best previous algorithm the bound can be as poor as O(n). Experiments on real and synthetic data sets show that our algorithm produces more than 40% fewer representative objects, yet offers the same or better clustering quality. We also propose a dynamic variant of the algorithm, which can be effectively used in an on-line setting.     

Using OLAP and multidimensional data for decision making

Managers see information as a critical resource and require systems that let them exploit it for competitive advantage. One way to better use organizational information is via online analytical processing and multidimensional databases (MDDBs). OLAP and MDDBs present summarized information from company databases. They use multidimensional structures that let managers slice and dice views of company performance data and drill down into trouble spots. For over a decade, proponents have touted these tools as the ultimate executive information system, but most of the hype comes from product vendors themselves. Based on our experience with several OLAP tools, we have developed a more pragmatic approach to the design of multidimensional information systems that lets managers make the most of their companies' information assets     

Computer program for automated sleep depth estimation

In this article, we present a new implementation of an amplitude-independent method for continuous-scale sleep depth estimation. Having been implemented as an add-on analysis module under commercially available biosignal recording and analysis software, it can be easily applied in clinical routine. The software gives the user full freedom to change all the analysis parameters inside theoretical limits. Computational sleep depth profiles produced by the presented software compare favourably with visual classifications. Future work will concentrate on systematic optimization of analysis parameters, further evaluation of the method with disturbed sleep and application of the method for automated adaptive sleep analysis.