50 nm MOSFETs with side-gates for induced source/drain extension

50 nm long MOSFETs with side-gates were optimised in terms of the side-gate length and successfully fabricated with conventional MOS technology. The simulated and fabricated 50 nm long MOSFET shows a reasonable subthreshold swing of 81 mV/dec and a low drain induced barrier lowering of 77 mV     

Dopant profile and gate geometric effects on polysilicon gatedepletion in scaled MOS

Polysilicon depletion effects show a strong gate length dependence according to experimental p-channel MOS capacitance-voltage (C-V) data. The effect can be influenced not only by gate geometries, but also by dopant profiles in poly-gates. These effects have been modeled and verified using device simulation. Nonuniform dopant distributions in the vertical and lateral direction in the poly-gate cause additional potential drops. The potential drop in the poly-gate becomes critical as the gate geometry is scaled down due to edge and corner depletions resulting from fringing electric fields     

Spontaneous Phase Separation of Poly(3‐hexylthiophene)s with Different Regioregularity for a Stretchable Semiconducting Film

Highly regioregular (RR) poly(3‐hexylthiophene)s PHTs are known to exhibit excellent electrical properties in comparison to chemically identical but regiorandom (rr) PHTs. In this study, distinct RR (97% and 55%)‐graded PHTs are subjected to solution blending to spontaneously separate the high‐RR PHT chains from the low‐RR PHT media and develop highly conjugated nanodomains in both solution and film. In the spun‐cast blend films, the rr PHT matrix imparts sufficient deformability of the channel layer required for stretchable organic thin‐film transistors (OTFTs), compared to neat RR PHTs and blends with a deformable polymer. OTFTs including RR PHT/rr PHT blend films show excellent hole mobility (µ) values up to 0.13 cm² V^?1 s^?1, surpassing that of the best RR PHT films (0.026 cm² V^?1 s^?1) fabricated by ultrasound solution pretreatment. Furthermore, a 50% stretched RR PHT/rr PHT film maintains ≈55% of its µ value at no strain, while RR PHT films show a sudden decrease in µ even at 10% stretch. The simple blending approach imparts deformability to π‐conjugated polymer films for application in stretchable OTFTs.     

Improved HBT linearity with a "post-distortion"-type collector linearizer

An HBT amplifier with a "post-distortion"-type linearizer utilizing a base-collector junction diode shows more than 8-dB improvement of adjacent channel power ratio, and the collector linearizer comprising a reverse biased base-collector junction diode requires no additional dc power consumption and has no deterioration of RF performance. The linearization technique of post-distortion compensates the nonlinearity of HBTs, which arises from the C/sub bc/ variation due to a large-signal swing.     

Adaptive random access and resource allocation scheme based on traffic load in HiperLAN type2 system

The MAC protocol of HiperLAN type2 is based on TDMA/TDD and provides access control and resource allocation schemes. We propose a scheme that provides adaptive random access and efficient resource allocation according to the traffic load for HiperLAN type2, by using access probability. The analysis and simulation results show that the proposed scheme performs better than the conventional scheme and supports priority services easily.     

A modified medium access control algorithm for systems with iterative decoding

Efficient transmission methods for fading radio channels often require an iterative decoder. This is for example the case for systems using turbo codes. Receiver decoder iterations could potentially lead to a latency problem which impacts the performance of the medium access control protocol. In this paper, we present modifications based on the carrier sense multiple access with collision avoidance (CSMA/CA) medium access control (MAC) protocol to accommodate the increased latency in the iterative processing. One area of applications is wireless local area networks (WLANs) with high data rate. The simulation results performed in the IEEE 802.11a WLAN environment by replacing the 802:11a's convolutional coding with turbo coding demonstrate that the proposed algorithm provides a throughput gain over the conventional method.     

Excellent Switching Uniformity of Cu-Doped $hbox{MoO}_{x}/hbox{GdO}_{x}$ Bilayer for Nonvolatile Memory Applications

We have investigated a Cu-doped MoO_x/GdO_x bilayer film for nonvolatile memory applications. By adopting an ultrathin GdO_x layer, we obtained excellent device characteristics such as resistance ratio of three orders of magnitude, uniform distribution of set and reset voltages, switching endurance up to 10⁴ cycles, and ten years of data retention at 85degC. By adopting bilayer films of Cu-doped MoO_x/GdO_x, a local filament was formed by a two-step process. Improved memory characteristics can be explained by the formation of nanoscale local filament in the ultrathin GdO_x layer.     

A Video Streaming System for Mobile Phones: Practice and Experience

This paper presents a case of video streaming system for mobile phone which has actually been implemented and deployed for commercial services in CDMA2000 1X cellular phone networks. As the computing environment and the network connection of cellular phones are significantly different from the wired desktop environment, the traditional desktop streaming method is not applicable. Therefore, a new architecture is required to suit the successfully streaming in the mobile phone environment. We have developed a very lightweight video player for use in mobile phone and the related authoring tool for the player. The streaming server has carefully been designed to provide high efficiency, reliability and scalability. Based on a specifically-designed suite of streaming protocol, the server employs an adaptive rate control mechanism which transmits the media packets appropriately into the network according to the change in network bandwidth.Hojung Cha is currently a professor in computer science at Yonsei University, Seoul, Korea. His research interests include multimedia computing system, multimedia communication networks, wireless and mobile communication systems and embedded system software. He received his B.S. and M.S. in computer engineering from Seoul National University, Korea, in 1985 and 1987, respectively. He received his Ph.D. in computer science from the University of Manchester, England, in 1991.Jongmin Lee is a Ph.D. candidiate in computer science at Yonsei University, Seoul, Korea. His research interests include wireless multimedia system, QoS architecture, multimedia communication networks. He received his B.S. and M.S. in computer science from Kwangwoon University in 1999 and 2001, respectively.Jongho Nang is a professor in the Department of Computer Science at Sogang University. He received his B.S. degree from Sogang University, Korea, in 1986 and M.S. and Ph.D. degree from KAIST, in 1988 and in 1992, respectively. His research interests are in the field of multimedia systems, digital video library, and Internet technologies. He is a member of KISS, ACM, and IEEE.Sung-Yong Park is an associate professor in the Department of Computer Science at Sogang University, Seoul, Korea. He received his B.S. degree in computer science from Sogang University, and both the M.S. and Ph.D. degrees in computer science from Syracuse University. From 1987 to 1992, he worked for LG Electronics, Korea, as a research engineer. From 1998 to 1999, he was a research scientist at Telcordia Technologies (formerly Bellcore) where he developed network management software for optical switches. His research interests include high performance distributed computing and systems, operating systems, and multimedia.Jin-Hwan Jeong received the B.S. and M.S. degrees in computer science from Korea University, Seoul, Korea, in 1997, and 1999, respectively. He is currently in Ph.D. course at Korea University. His research interests include video processing for thin devices, multimedia streaming and operating systems.Chuck Yoo received the B.S. degree in electronics engineering from Seoul National University, Seoul, Korea and the M.S. and Ph.D. in computer science in University of Michigan. He worked as a researcher in Sun Microsystems Lab. from 1990 to 1995. He joined the Computer Science and Enginnering Department, Korea University, Seoul, Korea in 1995, where he is currently a professor. His research interests include high performance network, multimedia streaming, and operating systems.Jin-Young Choi received the B.S. degree from Seoul National University, Seoul, Korea, in 1982, the M.S. degree from Drexel University in 1986, and the Ph.D. degree from University of Pennsylvania, in 1993. He is currently a professor of Computer Science and Engineering Department, Korea University, Seoul, Korea. His current research interests are in real-time computing, formal methods, programming languages, process algebras, security, software engineering, and protocol engineering.     

A 2.45 GHz CMOS up-conversion mixer design utilizing the current-reuse bleeding technique

A 2.45?GHz double-balanced modified Gilbert-type complementary metal-oxide-semiconductor (CMOS) up-conversion mixer design utilizing the current-reuse bleeding p-channel mos (PMOS) transistors is examined thoroughly based on simulations to demonstrate many advantages achievable when adopting the current-reuse bleeding technique in the mixer design. It is shown that the current-reuse bleeding technique certainly provides benefits in terms of gain, linearity and noise characteristics. In the mixer incorporating the current-reuse bleeding technique, the conversion gain improves monotonically with more bleeding. The linearity also improves with bleeding by a noticeable amount when the voltage headroom is not adequate. However, with excessive bleeding, linearity degrades by the current-limiting phenomena which defines the optimal bleeding ratio. Noise performance also improves monotonically with more bleeding. Of all the benefits provided, the improvement in noise performance seems most valuable. The measurement of the fabricated chip based on the standard 0.35?µm CMOS process supports the validity of the analysis. The measured mixer performance is quite excellent, and the measured characteristics are in close agreement with the simulations, which demonstrates the adequacy of the modelling approach based on the macro models for all the active and passive devices used in the design.     

Integrated on-chip 0.35 μm BiCMOS current-mode DC–DC buck converter

A current-mode DC–DC buck converter with a fully integrated power module is presented in this article. The converter is implemented using BiCMOS technology in amplifier and power MOSFET in a current sensor. The current sensor is realised by the power lateral double-diffused MOSFET with the aspect ratio much larger than that of a matched p-MOSFET. In addition, BiCMOS technology is applied in the error amplifier for an accurate current sensing and a fast transient response. The DC–DC converter is fabricated with 0.35?µm BiCMOS process. Experimental results show that the fully integrated converter operates at 1.3?MHz switching frequency with a supply voltage of 5?V. The output DC voltage is obtained as expected and the output ripple is controlled to be within 2% with a 30?µH off-chip inductor and 100?µF off-chip capacitor.