Homogeneous Catalyzed Ozone Decomposition in the Presence of Co(II).

The homogeneous decomposition of ozone in the presence of a Co(II) catalyst has been investigated in aqueous solution. Under the conditions investigated (Co(II) concentration: 0.0 – 2.0?ppm, pH: 1.6- 8.4, O₃ concentration: 5 10^?5 – 2.0 10⁴?M) the process can be assumed to follow pseudo first order kinetics with respect to ozone. Cobalt concentration dependency also obeys first order kinetics although it may be considered to reach a steady state concentration. pH exerts a positive influence on the decomposition rate from 1.6 to 7.1, the process leveling off at pH 8.4. An Arrhenius analysis of the temperature effect gave a moderate activation energy of the global reaction (E=10917?cal mol^?1). A more detailed radical mechanism than a simple pseudo first order reaction can be postulated for simulation purposes. By numerical optimization of some unknown kinetic constants the influence of several operating variables can be adequately predicted.     

Preparation and metal ion adsorption properties of the resin containing sulfonic acid groups

In this study, we explored a new ion exchange material synthesized by radical polymerization of styrene and 2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid by using 2,2′‐azo‐isobutyronitrile (1 mol %) and divinylbenzene (0.5 mol %) as initiator and crosslinking reagents, respectively. The resin was obtained from a large excess (90%) of styrene in the feed. The yield was 72.3%. The resin was completely insoluble in water and characterized by elemental analysis, FTIR spectroscopy, scanning electron microscopy, and thermal analysis. The metal ion retention capability was investigated for Ag(I), Hg(II), Cd(II), Zn(II), Pb(II), and Cr(III). The effect of pH, time, and resin/metal ion mol ratio on the metal ion retention was studied. Selectivity of the resins from a mixture of metal ions and the maximum retention capacity at optimum pH were also determined. The recovery of the resin by using 1 and 4 M HClO₄ and HNO₃ demonstrated that it is possible to recover the resin above 80%. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1230–1235, 2003     

High‐retention properties for Hg(II) ions of a resin containing ammonium and pyridine groups

The metal‐ion uptake behavior of the chelating resin poly([(3‐(methacryloylamino)propyl] trimethyl ammonium chloride‐co‐4‐vinyl pyridine) has been investigated. The resin is obtained by radical copolymerization in a yield of 99.6%. The hydrophilic resin shows a high retention capacity and selectivity toward Hg(II) ions in the presence of Cu(II), Pb(II), Cd(II), Zn(II), and Cr(III) ions. A retention of Hg(II) higher than 99% is observed after 5 min. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2595–2599, 2002     

Synthesis,characterization, and metal complexation of poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) as polychelatogens in aqueous solution

We carried out the free‐radical copolymerization of N‐phenylmaleimide with acrylic acid and acrylamide with an equimolar feed monomer ratio. We carried out the synthesis of the copolymers in dioxane at 70°C with benzoyl peroxide as the initiator and a total monomer concentration of 2.5M. The copolymer compositions were obtained by elemental analysis and ¹H‐NMR spectroscopy. The hydrophilic polymers were characterized by elemental analysis, Fourier transform infrared spectroscopy, ¹H‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymers were performed. Hydrophilic poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) were used for the separation of a series of metal ions in the aqueous phase with the liquid‐phase polymer‐based retention method in the heterogeneous phase. The method is based on the retention of inorganic ions by the polymer in conjunction with membrane filtration and subsequent separation of low‐molecular‐mass species from the formed polymer/metal‐ion complex. The polymer could bind several metal ions, such as Cr(III), Co (II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) inorganic ions, in aqueous solution at pH values of 3, 5, and 7. The interaction of the inorganic ions with the hydrophilic polymer was determined as a function of pH and a filtration factor. Hydrophilic polymeric reagents with strong metal‐complexing properties were synthesized and used to separate those complexed from noncomplexed ions in the heterogeneous phase. The polymers exhibited a high retention capability at pH values of 5 and 7. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Nonionic water‐soluble polymer: Preparation,characterization, and application of poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) as a polychelatogen

The free‐radical copolymerization of water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) was carried out with a feed monomer ratio of 75:25 mol %, and the total monomer concentration was 2.67M. The synthesis of the copolymer was carried out in dioxane at 70°C with benzoyl peroxide as the initiator. The copolymer composition was obtained with elemental analysis and ¹H‐NMR spectroscopy. The water‐soluble polymer was characterized with elemental analysis, Fourier transform infrared, ¹H‐ and ¹³C‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymer were performed. The thermal behavior of the copolymer and its complexes were investigated with differential scanning calorimetry (DSC) and thermogravimetry techniques under a nitrogen atmosphere. The copolymer showed high thermal stability and a glass transition in the DSC curves. The separation of various metal ions by the water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) reagent in the aqueous phase with liquid‐phase polymer‐based retention was investigated. The method was based on the retention of inorganic ions by this polymer in a membrane filtration cell and subsequent separation of low‐molar‐mass species from the polymer/metal‐ion complex formed. Poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) could bind metal ions such as Cr(III), Co(II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) in aqueous solutions at pHs 3, 5, and 7. The retention percentage for all the metal ions in the polymer was increased at pH 7, at which the maximum retention capacity could be observed. The interaction of inorganic ions with the hydrophilic polymer was determined as a function of the pH and filtration factor. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 178–185, 2006     

A non-linear forecasting system for the Ebro River at Zaragoza,Spain

This paper addresses the problem of modelling and forecasting river flows and levels based on flood routing type models. Though this is generally considered as a non-linear problem, very often it is treated by linear models. A forecasting system is built for the level and flow measurements registered in the Ebro River at the station of Zaragoza (Spain), with the main purpose of preventing floods in an early stage of development. The model takes advantage of the wealth of data available at the Ebro Hydrographical Confederation and is non-linear in essence. The system is obtained by application of system identification tools, starting from a linear specification and relating the parameters of the model estimated to some transformation of the input in the system. Such transformation requires the application of a Kalman Filter in a particular set up and the full estimation algorithm involves an iterative procedure. The model is fully developed on a data set and is thoroughly validated on a different span of data.     

Thermal degradation of copolymers based on 2-substituted oxazolines and β-methylhydrogenitaconate

Summary The thermal stabilities of poly(-methylhydrogenitaconate-co-2-methyl-2-oxazoline) and poly(-methylhydrogenitaconate-co-2-ethyl-2-oxazoline) obtained by spontaneous copolymerization have been studied by programmed thermogravimetric analysis over the temperature range from 293 K to 773 K under a flow of nitrogen. Most of the copolymers do not show weight loss until 473 K and they degrade in one step. The kinetic parameters Ea, n and A were obtained following one method of thermogravimetric analysis. The reaction order for all copolymers was 1.0. The poly(-methylhydrogenitaconate-co-2-methyl-2-oxazoline)s were the most thermostable copolymers.     

Adsorption behavior of Cu2+ and UO ions on crosslinked poly[2,2-bis(acrylamido)acetic acid]

The synthesis of a water-insoluble metal ion complexing resin was carried out by radical polymerization of 2,2-bis(acrylamido) acetic acid. The resin was characterized by elemental analyses, FTIR spectroscopy, and thermal analyses. The ability to bind copper(II), iron(II), iron(III), and uranium(VI) as well as the elution of the metal ions from the loaded resins were studied. For uranyl ions, pH 5 was the optimum sorption pH value. Sorption selectivity from the binary mixture Cu(II) + U(VI) was studied at pH 2. The thermal stability is increased by adsorption of UO. According to these results a coordination mechanism is suggested for sorption of copper and uranium. © 1995 John Wiley & Sons, Inc.     

Modified poly(ethyleneimine) supports for vanadium,molybdenum, and rhenium removal

Summary The solution behaviour of the polycarboxylic acid derived from scleroglucan (sclerox) has been investigated as a function of NaOH concentration and temperature by means of polarimetry and viscosimetry techniques. In comparison to the native polymer, sclerox is less sensitive to degradation at high NaOH concentration (up to NaOH equal to 0.4 M) and thermally more stable. The viscosity data show a normal polyelectrolyte effect and the polymer chains seem to be not stiff. We conclude that at high pH sclerox chains are in a flexible, probably single stranded conformation.     

Comfort of personal protective equipment

The degree of comfort of personal protective equipment (PPE) was investigated in an automobile encapsulating plant. Up to 96.2% of employees used one or a combination of PPE. Only 8% of the workers felt their respirators were comfortable, 30% tolerated their respirators, and 62% rated them as uncomfortable. The percentage of employees who rated their PPE (other than a respirator) as comfortable ranged from 32 to 52%. For comfort factor, coveralls/aprons rated 52%, safety glasses 51%, rubber gloves 42%, and hearing protectors 36%. PPE was tolerable (just acceptable) for about 30% of the employees. To increase the effectiveness and safety of PPE, the human-factor aspects of PPE design should be emphasized more and quality improvement should cover the wearability of PPE.