打破硬件至上的观念

正产品的硬件开发在今天尽管依然重要,但是它对于产品与众不同的帮助是微乎其微。目前设计价值以及设计的主要工作侧重在可决定竞争优势的软设计上,这也正是当今产品的真正IP——"器件智能性"。然而在传统的设计流程中,设计初始阶段的目标是创建可支持这些软件设计的硬件原型机。在硬件原型机没有制造出来之前我们不能进行任何有意义的软件开发。因此我们必须先做出一系列决定来确定所     

A 10-MHz SOI-Based Face Shear Square Micromechanical Resonator

A 10-MHz face shear (FS) square micromechanical resonator based on silicon-on-insulator (SOI) technology is presented in this paper. In order to examine the improvement of quality factor as well as motional resistance Rx in this structure, the center-stem anchor is employed in this study. The benefit of anchoring the square in the center, which is the nodal point, is that the energy losses through the anchor can be minimized. Hence, a quality factor value of 2.0 million and the motional resistance of 8.2 kΩ can be obtained with an FS mode resonator via finite element (FE) simulation. The results show the significance of the FS mode in this design, not only in its structure but also in its square-extensional mode and Lame-mode. Additionally, an SOI-based fabrication process is proposed to support the design.     

Optimal pulse shape for estimating positions of superimposed pulses

In this correspondence, we determine the optimal pulse shape for estimating positions of superimposed pulses by deriving the Cramer-Rao lower bound (CRLB) on the average estimation error variance and numerically optimizing it with respect to pulse shape. Our results show that a significant improvement in estimation error variance can be achieved relative to Gaussian and rectangular pulse shapes     

Photonic crystal-based permutation switch for optical networks

We present, for the first time, the design of a low-cross talk scalable permutation switch employing photonic crystal ring resonators in an optical network. Through this novel approach, the transition between different states of the \(2 \times 2\) optical switch, as the basic element, is achieved by applying different operating wavelengths. Subsequently, the shuffling mechanisms in \(3 \times 3\) and \(4 \times 4\) optical networks are realized by controlling the position of photonics crystal ring resonators. Lowest cross talk levels of 6 and 5% are obtained for “bar” and “cross” switching states, respectively.     

Outage Performance of Energy Harvesting DF Relaying NOMA Networks

In this paper, we investigate energy harvesting decode-and-forward relaying non-orthogonal multiple access (NOMA) networks. We study two cases of single relay and multiple relays with partial relay selection strategy. Specifically, one source node wishes to transmit two symbols to two respective destinations directly and via the help of one selected intermediate energy constraint relay node, and the NOMA technique is applied in the transmission of both hops (from source to relay and from relay to destinations). For performance evaluation, we derive the closed-form expressions for the outage probability (OP) at D ₁ and D ₂ with both cases of single and multiple relays. Our analysis is substantiated via Monte Carlo simulation. The effect of several parameters, such as power allocation factors in both transmissions in two hops, power splitting ratio, energy harvesting efficiency, and the location of relay nodes to the outage performances at the two destinations is investigated.     

A reversible data hiding scheme for VQ indices using locally adaptive coding

Data hiding is designed to solve the problem of secure information exchange through public networks such as Internet. In this paper, we present an improved reversible data hiding scheme that can recover original VQ indices after data extraction. As with Chang et al.’s scheme, our proposed scheme also depends on the locally adaptive coding scheme. However, experimental results confirm that the hiding capacity of our proposed scheme is around 1.36 bpi in most digital images, which is typically higher than that of Chang et al.’s [17]. Moreover, the average compression rate that can be achieved with our proposed scheme is 0.49 bpp, which outperforms both Lin and Chang’s scheme (0.50 bpp), Tsai (0.50 bpp), Chang et al.’s scheme (0.53 bpp), and Yang and Lin’s scheme (0.53 bpp).     

Linear phase paraunitary filter bank with filters of differentlengths and its application in image compression

In this paper, the theory, structure, design, and implementation of a new class of linear-phase paraunitary filter banks (LPPUFBs) are investigated. The novel filter banks with filters of different lengths can be viewed as the generalized lapped orthogonal transforms (GenLOTs) with variable-length basis functions. Our main motivation is the application in block-transform-based image coding. Besides having all of the attractive properties of other lapped orthogonal transforms, the new transform takes advantage of its long, overlapping basis functions to represent smooth signals in order to reduce blocking artifacts, whereas it reserves short basis functions for high-frequency signal components like edges and texture, thereby limiting ringing artifacts. Two design methods are presented, each with its own set of advantages: the first is based on a direct lattice factorization, and the second enforces certain relationships between the lattice coefficients to obtain variable length filters. Various necessary conditions for the existence of meaningful solutions are derived and discussed in both cases. Finally, several design and image coding examples are presented to confirm the validity of the theory     

Modulation Transfer Noise Effects from a Continuous Digital Carrier to FDM/FM Carriers in Memoryless Nonlinear Devices

An analysis of the modulation transfer noise effects from a continuous (nonbursty) digital carrier to multiple FDM/FM carriers in a common memoryless nonlinear amplifier (e.g., satellite transponder TWTA) is presented. It is shown that the modulation transfer noise, which is caused by the random envelope variations of the digital carrier due to the random data patterns and filtering of the PSK pulses, consists of both discrete and continuous spectral components in the baseband of the FDM/FM carriers. Numerical examples in terms of the noise power ratio as well as a comparison between measured and computed results are given. In general, the discrete or tonal interference component at the symbol rate of the digital carrier is quite significant. Results of this paper should be useful in the planning of FDMA satellite transponders employing the mixed PSK-FM mode of operation.     

Simulation of the High-Frequency Response of a Heterogeneous Ground through the Finite Difference Technique

To simulate the propagation of an electromagnetic plane wave in an inhomogeneous ground, the finite difference approach can be used. One of the main problems in using this method is imposing the boundary conditions near the ground surface, especially at high frequency. Indeed, for the E polarization, the upper top of the numerical grid must be sufficiently far away from the air-ground interface in order to neglect the field due to the heterogeneities and the discretization of the atmosphere is necessary. For magneto-telluric modeling, improved boundary conditions have already been proposed. This paper deals with a new condition, valid everywhere in air and which can be applied for E and H polarization. Thus even at high frequency, as for radar applications, only one line is added to the grid discretizing the ground.     

Improved Graphitic Structure of Continuous Carbon Nanofibers via Graphene Oxide Templating

Continuous carbon nanofibers (CNF) present an attractive building block for a variety of multifunctional materials and devices. However, the carbonization of poly(acrylonitrile) (PAN) precursors usually results in CNFs with poor graphitic structure and, consequently, modest/non‐optimized properties. This paper reports that the graphitic structure of CNFs can be improved with an addition of a small amount of graphene oxide into PAN prior to processing. Continuous CNFs with 1.4 wt% of graphene oxide nanoparticles are prepared from PAN solutions by electrospinning, stabilized, and carbonized at 800 °C, 1200 °C, and 1850 °C. While the as‐prepared graphene oxide‐filled PAN nanofibers exhibit a considerable reduction in polymer crystallinity, Raman analysis of the carbonized nanofibers shows that both templating with graphene oxide and increasing the carbonization temperature significantly improve the graphitic order in CNFs. The effect of graphene oxide is more significant at higher carbonization temperatures. Selected area electron diffraction analysis of individual nanofibers reveals increased graphitic order and preferred orientation both in the vicinity of visible graphene oxide nanoparticles and in the regions where nanoparticles were not visible. These results indicate a possibility of global templating in CNFs, where the addition of a small amount of graphene oxide nanoparticles can template the formation of good, preferentially oriented graphitic crystallites in CNFs, leading to improved structure and mechanical and transport properties.