Purity of Aluminum Hydroxide Derived from Triethylaluminum

Aluminum hydroxide obtained by hydrolysis of triethylaluminum is free of uranium and thorium at detection limits of 1 to 9 parts per billion (ppb). Other impurities commonly associated with aluminum oxides are present at low levels (Fe, ∼ 1 ppm; Si, 3 to 6 ppm). When the organoaluminum is intentionally contaminated with an iron salt, purity is restored by a simple distillation.     

Excess Gibbs free energy and excess enthalpy for mixtures of benzene and 1,1,2-trichlorotrifluoroethane

The rapid measurement of static vapour pressures of binary liquid mixtures as a function of composition by a new continuous-dilution apparatus is described. These measurements, together with the computed excess Gibbs free energies, are reported for mixtures of benzene and 1,1,2-trichlorotrifluoroethane at 283.30, 287.83, 293.21, 298.21, 303.06 and 308.15 K over the full composition range, and are compared with the results of Linford and Hildebrand. The excess enthalpies were measured directly at 303.15 K using a batch calorimeter. The equimolar excess enthalpy is + 754 J mol^?1, which is close to the value, + 727 J mol^?1, calculated from the temperature dependence of the computed equimolar excess Gibbs free energies.     

Mechanical Activation of Tetracalcium Phosphate

It was found that prolonged high-energy ball-milling of Hilgenstokite (tetracalcium phosphate, TTCP) resulted in a decrease in both particle and crystallite size, leading to a mechanical activation of the compound. This mechanically activated material demonstrated a high reactivity such that, in contrast to highly crystalline TTCP, a setting reaction with water to nanocrystalline hydroxyapatite (HA) and Ca(OH)₂ could be achieved at 37°C. However, crystalline TTCP is practically unreactive at physiologic temperatures because of the formation of a thin HA layer on the particle surface preventing further reaction.     

Induction of DNA-double-strand breaks by auger electrons from 99mTc complexes with DNA-binding ligands

The potential of certain Auger electron emitting nuclides for systemic radiotherapeutic applications has recently gained much attention. In particular, the ability of several nuclides, including 111In, 125I, and 123I, to induce DNA double-strand breaks (dsb), a good indicator of cytotoxicity, has been extensively studied. However, this ability has never previously been shown experimentally for 99mTc, which, besides the well-known gamma radiation that is used for diagnostic applications, also emits an average of 1.1 conversion electrons and 4 Auger or Coster-Kronig electrons per decay. Owing to the short range of Auger electrons, the radionuclide needs to be located very close to the DNA for dsb to occur. We synthesized two cationic 99mTcI-tricarbonyl complexes with pendant DNA binders, pyrene and anthraquinone. The X-ray crystal structures of the two complexes could be elucidated. Linear dichroism and UV/Vis spectroscopy revealed that the complex with pyrene intercalates DNA with a stability constant, K, of 1.1 x 10(6) M(-1), while the analogous complex with anthraquinone interacts with DNA in a groove-binding mode and has an affinity value of K=8.9 x 10(4) M(-1). We showed with phiX174 double-stranded DNA that the corresponding 99mTc complexes induce a significant amount of dsb, whereas non-DNA-binding [TcO4]- and nonradioactive Re compounds did not. These results indicate that the Auger electron emitter 99mTc can induce dsb in DNA when decaying in its direct vicinity and this implies potential for systemic radiotherapy with 99mTc complexes.     

Characterization and control of a structural epoxy adhesive

Problems associated with single-lap shear testing of a structural epoxy adhesive are discussed relative to analyses of the epoxy by infrared spectroscopy, gel permeation chromatography, scanning electron microscopy and other instrumental methods. The value of analytical techniques for assessing the adhesive's cure are shown, including a peculiar correlation of lap shear bond strength with the adhesive's initial uncured state as defined by infrared spectroscopy and gel permeation chromatography. This resulted in the development of definitive batch-to-batch adhesive quality control methods and specifications involving the water content, curing agent, and oxirane concentrations of the uncured system.     

Hybrid materials based on metal oxides and poly(organophosphazenes)

In this paper the sol-gel preparation of hybrid materials made of metal oxide and polytorganophosphazenel components is described. The main problem focused on during this research was to avoid phase separation in order to get homogeneous materials. This problem was pursued looking at the formation of genuine chemical bonds between the exploited polyphosphazenes and the inorganic composite networks. Investigations on the thermal, mechanical, and electroconductive properties of the synthesized, phosphazene-containing composite materials showed that these matrices presented improved mechanical and thermal features with respect to those of the original phosphazene macromolecule, while the ionic conductivities of the prepared molecular hybrids doped with lithium or silver trillate are of the same order of magnitude as those measured for the neat, original phosphazene substrate.Presented at the Ist Italian Workshop on Cyclo- and Polytphosphazenel Materials. February 15–16, 1996. at the CNR Research Area in Padova, Italy.     

A multivariate study of the correlation between tocopherol content and fatty acid composition in vegetable oils

The main biochemical function of the tocopherols is believed to be the protection of polyunsaturated fatty acids (PUFA) against peroxidation. A critical question that must be asked in reference to this is whether there is a biochemical link between the tocopherol levels and the degree of unsaturation in vegetable oils, the main source of dietary PUFA and vitamin E. We used a mathematical approach in an effort to highlight some facts that might help address this question. Literature data on the relative composition of fatty acids (16:0, 16:1, 18:0, 18:1, 18:2, and 18:3) and the contents of tocopherols (α-, β-, δ-, and γ-tocopherol) in 101 oil samples, including 14 different botanical species, were analyzed by principal-component analysis and linear regression. There was a negative correlation between α- and γ-tocopherols (r=0.633, P<0.05). Results also showed a positive correlation between linoleic acid (18:2) and α-tocopherol (r=0.549, P<0.05) and suggested a positive correlation between linolenic acid (18:3) and γ-tocopherol.     

Reaction rate and MWD changes in crosslinking of PVC,with dithioltriazine

The reaction rate of crosslinking of PVC with dithioltriazine has been studied by following gel formation and changes in the molecular weight distribution (MWD). Compounding was performed on a roll mill at 145°C and crosslinking by heat treatment at 180 or 90°C. In this system crosslinking is executed by the thiolate anion, formed in situ by reaction with MgO. We have studied the catalyzing effect of several polyols in order to achieve a more efficient reaction. Most likely, these catalysts work by chelating the Mg²⁺ ions, thus increasing the nucleophilic character of the thiolate. With the most efficient ones, ditrimethylolpropane and HO(CH₂CH₂)_6-7H, complete crosslinking can be obtained in 3 min at 180°C, i.e., at processing temperatures. We also followed the changes in the MWD before gelation at a considerably lower temperature, 145°C, and found an extensive molecular enlargement even after 5-10 min. Most surprisingly, μM_n increased up to 100% without formation of insoluble material. By ¹H-NMR measurements on low molecular weight extracts, we have shown this to be due to a fast and selective reaction with allylic chlorine in the unsaturated end groups, ～ CH₂? CH?CH? CH₂Cl, formed in the mechanism of chain transfer to monomer. Due to this reaction, formulations with too high reactivity may crosslink during processing, which calls for a careful balancing of the reactivity for each processing case.     

Crystal lattice deformation and the mesophase in poly(ethylene terephthalate) uniaxially drawn by solid-state coextrusion

The development of crystalline and mesophase structure on drawing of poly(ethylene terephthalate) (PET) has been studied. The uniaxial drawing has been done by solid-state coextrusion from 50 to 90°C. The unit-cell parameters of stress-induced crystallites in extrudates have been determined as a function of extrusion draw ratio (EDR) up to 4.4 and at an extrusion temperature (ET) above T_g, at 70 and 90°C. The higher the EDR, the longer the c-axis chain direction, the shorter the a and b axes and the smaller the unit-cell volume. In comparison with the conventional lattice parameters obtained by Bunn and Fisher, the highest elongation of the c axis is near 10%. These features imply that the lattice of stress-induced crystallites is far from the closest packing. Coextrudates made below the T_g of PET differ markedly from those made above T_g. Wide-angle X-ray diffraction (WAXD) patterns of PET extruded at 50°C (below T_g) even at high draw ratio exhibit small and/or imperfect crystallites. They appear much as a mesophase. The distance between macromolecular chains ranges from 3.2 to 5.4 Å. The shortest value in the mesophase approaches the interplanar crystal distance of 3.4 Å for the (100) crystal face, on which the benzene rings lie. The crystalline peak separation of the PET, WAXD curve has been evaluated to obtain absolute crystallinities and the content of mesophase and amorphous phase.     

GC/MS characterization of effluents front the ozone bleaching of eucalypt kraft pulps

Concerns regarding the possible environmental effects of organochlorine by‐products from bleaching of pulp with chlorine‐based compounds have led to the pulp and paper industry developing new bleaching sequences. Ozone, oxygen and hydrogen peroxide are the main reagents in these Totally Chlorine Free (TCF) bleaching processes.

In this study, eucalypt kraft pulps from a variety of Australian wood sources were subjected to bleaching sequences comprising oxygen, ozone and hydrogen peroxide/alkali extraction stages. The aqueous liquid effluents from each stage were analyzed by GC/MS for aldehydes, ketones, alcohols, carboxylic acids and other by‐products. Pentafluorobenzyl oxime derivatives of the aldehydes and ketones were analyzed by electron impact GC/MS. The major carbonyl compounds detected were formaldehyde, glyoxal, dimethylglyoxal and acetone. An homologous series of n‐aldehydes corresponding to cleavage of ω‐3, 6, 9 and 12 unsaturated fatty acids also was detected. Aromatic aldehydes were identified in the oxygen stage and high consistency ozone stages, but not in any medium consistency ozone or post‐ozone bleach stages. In all stages a series of saturated alkyl carboxylic acids from formic to octacosanoic acid was detected. Formic and acetic acids were present in the highest yield. Only trace quantities of unsaturated fatty acids were detected. Details of these and other compounds detected are discussed.