Study of the catalytic combustion of lean hydrogen-air mixtures in a monolith reactor

This paper presents an experimental study of catalytic hydrogen combustion that used commercial catalysts containing Pt in a honeycomb monolith reactor in a plug flow configuration. The emphasis is on determining global kinetics in the case of low hydrogen content. Measurements of the temperature and composition of the reaction product at the outlet in the steady state condition at the different initial compositions of hydrogen and total volumetric feed rates were performed. The conversion of hydrogen was determined in parallel to the composition of the reaction product at the outlet using GC as well as by means of the thermodynamic approach using material and energy balances. The influence of the flow rate and initial molar fraction of hydrogen on hydrogen conversion is shown. A kinetic expression of the Arrhenius type is proposed with the reaction first order in hydrogen and zero order in oxygen for the overall process of the oxidation of hydrogen in lean hydrogen-air mixtures. The determined activation energy was in good agreement with the desorption activation energy for O₂ from graphene-covered Pt(111) surfaces using temperature-programmed desorption. This result shows transport-limitations for heterogeneous hydrogen conversion in catalytic hydrogen combustion.     

Optimal sensor placement for joint parameter and state estimation problems in large-scale dynamical systems with applications to thermo-mechanics

We consider large-scale dynamical systems in which both the initial state and some parameters are unknown. These unknown quantities must be estimated from partial state observations over a time window. A data assimilation framework is applied for this purpose. Specifically, we focus on large-scale linear systems with multiplicative parameter-state coupling as they arise in the discretization of parametric linear time-dependent partial differential equations. Another feature of our work is the presence of a quantity of interest different from the unknown parameters, which is to be estimated based on the available data. In this setting, we employ a simplicial decomposition algorithm for an optimal sensor placement and set forth formulae for the efficient evaluation of all required quantities. As a guiding example, we consider a thermo-mechanical PDE system with the temperature constituting the system state and the induced displacement at a certain reference point as the quantity of interest.     

Nitroreductase-Mediated Release of Inhibitors of Lysine-Specific Demethylase 1 (LSD1) from Prodrugs in Transfected Acute Myeloid Leukaemia Cells

Lysine-specific demethylase 1 (LSD1) has evolved as a promising therapeutic target for cancer treatment, especially in acute myeloid leukaemia (AML). To approach the challenge of site-specific LSD1 inhibition, we developed an enzyme-prodrug system with the bacterial nitroreductase NfsB (NTR) that was expressed in the virally transfected AML cell line THP1-NTR⁺. The cellular activity of the NTR was proven with a new luminescent NTR probe. We synthesised a diverse set of nitroaromatic prodrugs that by design do not affect LSD1 and are reduced by the NTR to release an active LSD1 inhibitor. The emerging side products were differentially analysed using negative controls, thereby revealing cytotoxic effects. The 2-nitroimidazolyl prodrug of a potent LSD1 inhibitor emerged as one of the best prodrug candidates with a pronounced selectivity window between wild-type and transfected THP1 cells. Our prodrugs are selectively activated and release the LSD1 inhibitor locally, proving their suitability for future targeting approaches.     

Influence of the Temperature on Coccolith-Containing Systems from Emiliania huxleyi Cultivations

Thermogravimetric analysis of a coccolith-containing biogenic broth showed a three-step degradation process. According to this system behavior, the biogenic broth was heated to specific temperatures and characterized in terms of its morphology, surface chemistry, and crystallinity. The elemental and organic composition of the treated samples was also evaluated and compared to the reference material. The presented results were acquired in an effort to exploit pretreatment scenarios for such a biogenic system that would improve and support a separation process.     

Ram‐air kite airfoil and reinforcements optimization for airborne wind energy applications

We present a multidisciplinary design optimization method for the profile and structural reinforcement layout of a ram‐air kite rib. The aim is to minimize the structural elastic energy and to maximize the traction power of a ram‐air kite used for airborne wind energy generation. Because of the large deformations occurring during flight, a fluid‐structure interaction (FSI) routine is included in the optimization, which determines the actual deformed rib geometry and its corresponding aerodynamic characteristics. A qualitative comparison between FSI inclusion and exclusion in the optimization is given. Discrepancies in airfoil profile and structural layout are observed.     

Numerical verification of the continuous calculation method for tip stress during the driving process of the dynamic penetration test

This paper presents a calculation method for obtaining the continuous variation in stress between the tip and the soil during dynamic penetration tests, particularly in the case of using the Panda 3® penetration testing device. The originality of the method is that the tip stress can be computed continuously throughout the driving process. For each impact of the hammer on the penetrometer, data are recorded by sensors located at the top of the apparatus. Then, the stress at the tip and the displacement of the apparatus are calculated with a method based on the propagation of waves in the device. A three-dimensional numerical model of the penetration test, based on the Panda 3® specifications and using the discrete element method (DEM), is proposed in this paper. The purpose of the simulations is to validate the calculation method by comparing the curves of the tip stress versus the penetration distance obtained in two different ways, the first being the distance directly observed at the tip and the second being the distance calculated from the data recorded at the top of the penetrometer, as with the experimental device. The entire apparatus is represented, including the hammer, the rod, and the tip, and is driven into the model soil. The calculation method is applied, and the results are compared to the actual response of the soil to the driving of the penetrometer directly at the tip, which can be obtained with the numerical model. The responses are found to be very similar, confirming the theoretical framework and its underlying assumptions. This method is applied to dynamic penetration tests and provides the opportunity to obtain mechanical parameters other than the tip resistance from the tests.     

Chlorophyll Fluorescence Imaging for Monitoring the Effects of Minimal Processing and Warm Water Treatments on Physiological Properties and Quality Attributes of Fresh-Cut Salads

In this study, chlorophyll fluorescence imaging (CFI) was used to monitor plant stress induced by cutting of mini romaine lettuce (Lactuca sativa L. var. longifolia) and by cutting and washing of endive (Cichorium endivia L.) during storage. Regarding the more detailed study of endive fresh-cut salads, we additionally monitored respiratory activity, phenylalanine ammonia lyase (PAL) activity, contents of plant pigments, and cut edge browning. Determination of maximum quantum efficiency F _v/F _m was feasible through sealed consumer-sized film bags, thus, enabling the non-invasive monitoring of both fresh-cut salad types in the corresponding modified atmosphere during storage. Cutting of romaine lettuce provoked a partially reversible drop of F _v/F _m during the first 24 h. Subsequently, F _v/F _m of cut romaine strongly decreased with elapsing shelf life, whereas intact leaves exhibited only a slight decline. Regarding minimally processed endive, warm water washing progressively reduced F _v/F _m with increasing heat exposure, while respiratory activities and the content of accessory pigments remained unaffected. The heat-dependent decrease of F _v/F _m was correlated to the inhibition of the PAL activity. Mildly warm washing (40 °C, 120 s; 45 °C, 60 s) reduced PAL activities, while F_v/F_m remained widely unaffected and visual quality was only partially improved. However, warm water washing at elevated temperatures (45 °C, 120 s; 50 °C, 30–60 s) enabled maximum visual quality retention, accompanied by a significant decrease of F _v/F _m. CFI may represent a useful tool to monitor the stress conditions due to cutting and warm water treatments, hence, allowing the systematic improvement of fresh-cut produce.     

Some compositional changes in malted sorghum (Sorghum vulgare) grain and its value in broiler chicken diet

Grains of two sorghum (Sorghum vulgare L) varieties were germinated at room temperature for 2, 4 and 6 days. Germination resulted in an increase in protein content due to dry matter loss; this rose with increasing time of germination. The absolute amount of tannin was unchanged until the fourth day of germination but decreased markedly by the sixth day. Fractionation of the grain protein of one variety showed that there was a large increase in the albumin-globulin fraction (rich in lysine) and a decrease in the kafirin and cross-linked kafirin fraction (low in lysine) as a result of germination. Although these changes resulted in a more than 30% increase in lysine content on the fourth and sixth days of germination, a substantial loss in dry matter occurred when germination was continued up to 6 days. When 14-day-old Hubbard chicks were fed a diet containing about 59% malted sorghum supplemented with lysine, they showed better (P < 0.05) weight gain and efficiency of feed conversion than those on malted sorghum without lysine supplementation. However, malting reduced the amount of lysine needed to supplement the diet from 0.25% for unmalted sorghum to 0.18% for malted sorghum.     

Regression Techniques for Oceanographic Parameter Retrieval Using Space-Borne Microwave Radiometry

Variations of conventional multiple regression techniques are applied to the problem of remote sensing of oceanographic parameters from space. The techniques are specifically adapted to the scanning multichannel microwave radiometer (SMMR) launched on the Seasat and Nimbus 7 satellites to determine ocean surface temperature, wind speed, and atmospheric water content. The retrievals are studied primarily from a theoretical viewpoint, to illustrate the retrieval error structure, the relative importances of different radiometer channels, and the tradeoffs between spatial resolution and retrieval accuracy. Comparisons between regressions using simulated and actual SMMR data are discussed; they show similar behavior.     

Extraction of heavy metals from soils using biodegradable chelating agents

Metal pollution of soils is widespread across the globe, and the clean up of these soils is a difficulttask. One possible remediation technique is ex-situ soil washing using chelating agents. Ethylenediaminetetraacetic acid (EDTA) is a very effective chelating agent for this purpose but has the disadvantage that it is quite persistent in the environment due to its low biodegradability. The aim of our work was to investigate the biodegradable chelating agents [S,S]-ethylenediaminedisuccinic acid (EDDS), iminodisuccinic acid (IDSA), methylglycine diacetic acid (MGDA), and nitrilotriacetic acid (NTA) as potential alternatives and compare them with EDTA for effectiveness. Kinetic experiments showed for all metals and soils that 24 h was the optimum extraction time. Longer times only gave minor additional benefits for heavy metal extraction but an unwanted increase in iron mobilization. For Cu at pH 7, the order of the extraction efficiency for equimolar ratios of chelating agent to metal was EDDS > NTA> IDSA > MGDA > EDTA and for Zn it was NTA > EDDS > EDTA >MGDA > IDSA. The comparatively low efficiency of EDTA resulted from competition between the heavy metals and co-extracted Ca. For Pb the order of extraction was EDTA > NTA >EDDS due to the much stronger complexation of Pb by EDTA compared to EDDS. At higher concentration of complexing agent, less difference between the agents was found and less pH dependence. There was an increase in heavy metal extraction with decreasing pH, but this was offset by an increase in Ca and Fe extraction. In sequential extractions EDDS extracted metals almost exclusively from the exchangeable, mobile, and Mn-oxide fractions. We conclude that the extraction with EDDS at pH 7 showed the best compromise between extraction efficiency for Cu, Zn, and Pb and loss of Ca and Fe from the soil.