Anisotropic loss of toughness with physical aging of work toughened polycarbonate

We have studied the response of mechanically toughened and physically aged polycarbonate primarily using Charpy impact and ultrasonic wave speed measurements. The toughening was conducted through plastic compression on as‐received PC. The Charpy impact tests showed anisotropic toughening, both in the absorbed energy and in the mode of fracture. The amount of toughening with plastic compression, even though anisotropic, is centered around the response of annealed and quenched samples, which represent the response of an unaged PC. There was an anisotropic drop in the toughness of some samples with aging. The time of this drop was uncorrelated in the different directions and disappeared for the highly toughened samples. This transition was bimodal and statistically distributed between either a fully ductile or a fully brittle failure. As the samples were prepared in a manner to remove induced residual stresses, this drop in toughening may be associated with an intrinsic anisotropic thermal aging of the deformed material. POLYM. ENG. SCI., 54:794–804, 2014. © 2013 Society of Plastics Engineers     

An observer‐metamerism sensitivity index for electronic displays

The effect of observer metamerism induced by electronic displays depends to a large extent on their primary spectra (red, green, and blue in the most common case). In particular, for narrow‐band primary spectra whose peak wavelength lies in the range of high variability of the observer's color‐matching function, some observers can experience very large differences between actual surface colors (e.g. in a light booth) and displayed colors if the monitor is optimized for the International Commission on Illumination (CIE) 1931 standard observer. However, because narrow‐band light‐emitting diodes lead to larger color gamuts, more and more monitors with very narrow band primaries are coming onto the market without manufacturers taking into account the associated problem of observer variations. Being able to measure these variations accurately and efficiently is therefore an important objective. In this paper, we propose a new approach to predict the extent of observer metamerism for a particular multiprimary display. Unlike existing dedicated models, ours does not depend on a reference illuminant and a set of reflectance spectra and is computationally more efficient.     

Some aspects on ruggedness of SiC power devices

This article is on effects that can destroy SiC power semiconductor devices. The failure physics in SiC devices are discussed based on the well understood effects in silicon devices. In some device properties, such as surge current, short circuit, static avalanche and dynamic avalanche, SiC has significant possible advantages compared to silicon. For cosmic ray stability, there are no unique results. Regarding thermal mechanical stress on interface materials, SiC is more challenging. The same may hold for electrical stress in passivation layers at the junction termination.     

Measuring errors and violations on the road: A bifactor modeling approach to the Driver Behavior Questionnaire

The Driver Behavior Questionnaire (DBQ) is a self-report measure of driving behavior that has been widely used over more than 20 years. Despite this wealth of evidence a number of questions remain, including understanding the correlation between its violations and errors sub-components, identifying how these components are related to crash involvement, and testing whether a DBQ based on a reduced number of items can be effective. We address these issues using a bifactor modeling approach to data drawn from the UK Cohort II longitudinal study of novice drivers. This dataset provides observations on 12,012 drivers with DBQ data collected at .5, 1, 2 and 3 years after passing their test. A bifactor model, including a general factor onto which all items loaded, and specific factors for ordinary violations, aggressive violations, slips and errors fitted the data better than correlated factors and second-order factor structures. A model based on only 12 items replicated this structure and produced factor scores that were highly correlated with the full model. The ordinary violations and general factor were significant independent predictors of crash involvement at 6 months after starting independent driving. The discussion considers the role of the general and specific factors in crash involvement.     

Optimization of subtractive-transformative hybrid processes supported by the technological heredity concept

This paper presents the optimization procedure of a hybrid removal-forming type process based on the minimum energy consumption and demanded surface roughness which is supported by the analysis of transformation of the surface and sublayer properties termed as the technological heredity. The experimental investigation covers an alloy steel hardened to 35 HRC and 55 HRC which was initially turned using coated carbide and CBN tools and subsequently burnished to produce surfaces with Ra roughness parameter of about 0.15 μm. The modifications of the initial surface profiles, microstructure and microhardness of the sublayer were determined and relevant technological limits are selected.     

Crystallization of Stoichiometric SbSI Glass

Congruent crystallization of antimony sulphoiodide (SbSI) glass of stoichiometric composition, which is prepared successfully for the first time using rapid melt‐quenching, has been investigated using differential scanning calorimetry (DSC). The results for glass powder show a glass transition at 127°C and two separate exothermal peaks with maxima around 140°C and 190°C. The ratio of the intensities of the exothermal peak at ~190°C to the peak at ~140°C increases as the particle size and heating rate are increased, but their total enthalpy remains constant at 62 ± 2 J/g for all DSC runs. Surface heating of the glass induced by a 520 nm CW laser shows two contracted regions: needle‐like crystalline formations at low temperature and bulk crystallization at high temperature. The observed phenomena and DSC results suggest two different kinds of crystallization of the SbSI phase: one‐dimensional crystallization at low temperature which starts from the sample surface and three‐dimensional bulk crystallization that continues the transformation to crystalline state at higher temperatures. The origin of the two different crystallizations can be traced to the strong anisotropy of the SbSI crystal structure due to the weak van der Waals interaction between covalent‐ionic chains (Sb₂S₂I₂)_n.