PAA-PSF交联复合膜的制备及对低浓度有机醇水溶液反渗透分离性能研究

进行了ＰＡＡ（ＰｏｌｙａｃｒｙｌｉｃＡｃｉｄ）－ＰＳＦ（Ｐｏｌｙｓｕｌｆｏｎｅ）交联复合膜的制备，研究了交联剂、添加剂对膜性能的影响，并通过扫描电镜观察了膜的断面结构．研究了ＰＡＡ－ＰＳＦ交联复合膜对低浓度有机醇类水溶液反渗透分离性能．发现对于１０００×１０－６乙醇水溶液截留率达到６６．２％，透过流束可达０．９×１０－６（ｍ３·ｍ－２·ｓ－１）．随醇的分子量的增加，截留率不断上升，对戊醇的截留率达９４．３％，而透过流束则保持相对稳定．对不同结构醇类的分离性能研究表明，截留率存在有：ｔｅｒｔ－＞ｓｅｃ－＞ｉｓｏ－＞ｎ－的规律．     

新取代苯基荧光酮试剂的合成及其性质的研究Ⅱ．新型取代苯基荧光酮与金属离子显色反应的研究

研究了３，５－二溴－４－氨基苯基荧光酮、３，５－二溴－４－偶氮变色酸等８种苯基荧光酮在酸性介质中与高价金属离子Ｚｒ（Ⅳ）、Ｍｏ（Ⅵ）、Ｗ（Ⅵ）、Ａｌ（Ⅲ）、Ｇａ（Ⅲ）等的显色反应。３，５－位二溴取代的试剂的灵敏度高于未取代的灵敏度，摩尔吸光系数绝大多数在１０５Ｌ·ｍｏｌ－１·ｃｍ－１以上。     

钛容器的特点

根据钛材的化学、物理、力学和工艺性能介绍了钛容器在设计、制造、检验和应用方面的特点。     

TNT-RDX混合废水处理的实验研究——生物-吸附法

介绍了在２５￣３５℃的温度下，用厌氧－兼氧－水生生物－吸附组合工艺处理ＴＮＴ和ＲＤＸ混合废水的方法，进行了日处理量为６０￣９００Ｌ的实验室放大实验。当ＴＮＴ和ＲＤＸ混合废水总浓度为４￣１２ｍｇ／Ｌ时，经过该工艺处理后可达到国家排放标准。其中厌氧－兼氧能去除废水中８０％以上的ＴＮＴ和ＲＤＸ，水生生物（水葫芦）对ＴＮＴ及ＲＤＸ也有一定的降解效果，最后用活性炭吸附可以实现深度处理。     

ACAT inhibitors derived from hetero-Diels-Alder cycloadducts of thioaldehydes

Acyl-CoA:cholesterol acyltransferase (ACAT) is the enzyme largely responsible for intracellular cholesterol esterification. A systemic inhibitor of ACAT is believed to be able to slow or even reverse the atherosclerotic process. Towards that goal, a series of cyclic sulfides, derived from the hetero-Diels-Alder reaction of thioaldehydes with 1,3-dienes, and bearing carboxamide substituents, were prepared and evaluated for in vitro (in several tissues and species) and ex vivo ACAT inhibition. Minor changes in subsequent structure were found to have a significant effect in optimization of the biological activity of this series of compounds.     

Complete forward displacement solutions for a class of three-branch parallel manipulators

Forward displacement solutions are presented for a class of spatial parallel manipulators. In particular, considered are manipulators consisting of a platform supported through passive spherical joints by three branches, each branch having three-revolute joints forming its main arm. Solutions are described for arbitrary main-arm layouts and for all possible cases of redundant (nine, eight, and seven sensors) and non-redundant (six sensors) sensing of branch main-arm joint displacements. It is demonstrated that closed-form forward displacement solutions can be found for all cases of redundant sensing. Furthermore, it is shown that a closed-form solution can be obtained for one of the two possible cases of non-redundant sensing of the main-arm joint displacements. The only case of joint displacement sensing not allowing a closed-form forward displacement solution is two joints sensed per branch, a case that can be expressed as a 16th-order polynomial of a single variable. Due to the importance of having efficient and failure-safe solutions for the forward displacement problem, it is suggested that appropriate redundancy in displacement sensing should be an important consideration in the design of parallel manipulation devices. © 1994 John Wiley & Sons, Inc.     

More investigations of leakage and nonleakage conductor-backedcoplanar waveguide

Through rigorous full-wave analysis, the effective dielectric constant, normalized attenuation constant, characteristic impedance, and radiation pattern of two types of conductor-backed coplanar waveguides are obtained. The analytic results show that the leakage effect is not only controlled by the thickness and dielectric constant of the substrate but also by the slot width. The leakage power transforms to a radiation space wave and a surface wave, the transverse electric field diagrams in the substrate and the far-zone radiation pattern verify the leakage phenomenon. The first structure has the maximum radiation intensity in the endfire direction, while the second one which has more leaky waves radiates into the air, is better served as a radiating device. For both structures under the nonleakage condition, the characteristic impedance is sensitive to the change of the strip width but not the slot width. Using these properties, the nonleaky and leaky circuits can exist on the same circuit board by choosing appropriate circuit dimensions     

微量Ag对CP276合金性能和组织的影响

研究添加不同含量的Ａｇ对ＣＰ２７６合金的拉伸性能和时效组织的影响。对拉伸强度、延伸率测试及透射电镜观察表明：０．１１ｗｔ％加入可促进Ｔ１相析出，使合金强度值升高；０．３５ｗｔ％Ａｇ的加入可在时效前期生成富Ａｇ、Ｍｇ的稳定的ＧＰ区，从而降低合金中Ｃｕ的固溶度，阻碍Ｔ１相析出，时效后期，ＧＰ区分解，生成大量Ｔ１相，使合金强度值显著升高。     

Enhancement of power system data debugging using GSA-based data-mining technique

In this paper, a gap-statistic-algorithm (GSA)-based data-mining technique is applied to enhance the data debugging in power system operations. In the proposed approach, the GSA technique is embedded into a neural network frame in anticipation of improving the detection capability of bad data. Thanks to the clustering capability exhibited by GSA in which the number of clusters can be optimally determined, the proposed approach becomes highly effective to localize the group of abnormal data. This proposed approach has been tested through the data collected from different scenarios made on an IEEE 30-bus system and 118-bus systems. Test results reveal the feasibility of the method for the data diagnosis applications.