Near-field optical imaging of unstained bacteria: comparison with normal atomic force and far-field optical microscopy in air and aqueous media

Simultaneous near-field scanning optical and atomic force imaging of bacteria is presented. The bacteria imaged in these studies were unstained. The near-field optical images had excellent signal-to-noise and showed excellent contrast even in these unstained specimens. The images obtained were interpreted in terms of the images that have been obtained by transmission electron microscopy and X-ray imaging. The results show that bacterial near-field optical imaging is going to be a very important tool in the arsenal of the bacteriologist both in terms of understanding the fundamental processes in the life cycle of bacteria with and without cytochemical staining and in terms of clinical diagnostic applications.     

Passive coupling of InGaAsP/InP laser array and singlemode fibres using silicon waferboard

Passive alignment of semiconductor lasers and singlemode fibres has been achieved for the first time using a micro-machined silicon substrate. Mechanical alignment features fabricated on the substrate surface were used to align the active regions of an InGaAsP/InP laser array to four singlemode fibres held in V grooves. Optical coupling efficiencies have been achieved that are comparable to values obtained using the conventional technique of active fibre manipulation. The approach, called silicon waferboard, offers the potential for low-cost optoelectronic device packaging as well as a means for dense hybrid integration of optoelectronic, electronic and optical components required for multifibre, multichip systems.<>     

Planar p-on-n HgCdTe FPAs by Arsenic Ion Implantation

This paper reviews recent developments in the characterization of planar p-on-n photodiodes fabricated from long- and mid-wavelength Hg_1−x Cd _x Te at␣the Electronics and Information Technology Laboratory (LETI). The Hg_1−x Cd _x Te epitaxial layers were grown by both liquid-phase and molecular-beam epitaxy. Planar p-on-n photodiodes were fabricated by arsenic implantation into an indium-doped Hg_1−x Cd _x Te base layer. Electro-optical characterization on these p-on-n photodiodes showed low leakage currents (shunt resistance > 10 GΩ) and mean R ₀ A values comparable to the state of the art, i.e., equal to 5000 Ω cm² at λ _c = 9.3 μm (λ _c: cutoff wavelength). Results of focal-plane arrays operating in both the long-wavelength infrared (IR) and middle-wavelength IR bands are reported, with noise equivalent delta temperature and responsivity values at λ _c = 9.3 μm in excess of 99.64%. These results demonstrate the viability and technological maturity of both material growth and device processing.     

Issues in HgCdTe Research and Expected Progress in Infrared Detector Fabrication

The purpose of this paper is to review the trends in HgCdTe research, illustrating the discussed ideas with the latest results obtained at DEFIR (CEA-LETI and Sofradir joint laboratory). The beginning of this paper is devoted to an extended introduction to today’s issues concerning HgCdTe photodiode performance enhancement. In fact, very high-quality material is mandatory for ultrahigh performance at low temperature as well as for high noise operability at high operating temperature (HOT). Therefore, a strong effort has been carried out during the last few years for lattice-matched CdZnTe substrate and HgCdTe active layer growth improvement, leading to very large substrates and ultraflat liquid-phase epitaxy layers. The same analysis holds for diode process quality and passivation. Therefore, the photodiode process has been completely revisited in order to optimize HOT operability. Also necessary for the next generation of HOT devices, some significant progress has been made in small-pixel-pitch interconnection on silicon read-out circuits. Indeed, the first 10-μm focal-plane arrays (FPAs) have been successfully fabricated this year in the mid-wave infrared (IR) band. The latest avalanche photodiode (APD) realizations are also presented with 15-μm-pitch FPAs for passive imaging and 30-μm-pitch ultrafast arrays running at 1.5 kHz full frame rate. Linear-mode photon counting using APDs is also briefly discussed. Finally, the paper concludes on more complex structures for the third generation of IR detectors, discussing the latest achievements in dual-band FPA fabrication in various spectral bands.     

Modeling of Dark Current in HgCdTe Infrared Detectors

This paper presents modeling work carried out using a finite-element modeling approach. The physical models implemented for HgCdTe infrared photodetectors are reviewed. In particular, generation–recombination models such as Shockley–Read–Hall through a trap level in a narrow bandgap and Auger recombination are included. These well-established models are described using widely published analytical expressions. This paper highlights both the unique set of trap parameters found to fit the dark current as a function of temperature and composition for mercury-vacancy p-type-doped photodiodes and their use in a finite-element code. An equivalent set of trap parameters is also proposed for indium n-type-doped material in a p-on-n photodiode simulated in three dimensions. Device simulations also include the impact ionization process to fine-tune the saturation dark current. Finally, excess dark current is also modeled with the help of nonlocal band-to-band tunneling, which requires no fitting parameters.     

Monolithically integrated laser/rear-facet monitor arrays withV-groove for passive optical fiber alignment

An InGaAsP/InP laser monolithically integrated with a rear facet monitor and a fiber V-groove has been demonstrated for the first time. The integrated device incorporates an etched-facet laser fabricated using an in situ, multistep, reactive ion etch process. The integrated V-groove, which is etched directly into the InP substrate, is designed to enable passive alignment of an optical fiber to the active region of the laser. Passive coupling efficiencies of 18% and 8% have been obtained using cleaved multimode and single mode fibers, respectively. Responsivities of the rear facet monitor were as high as 0.49 A/W     

The effect of scale and interfacial tension on liquid–liquid dispersion in in-line Silverson rotor–stator mixers

The effect of scale, processing conditions, interfacial tension and viscosity of the dispersed phase on power draw and drop size distributions in three in-line Silverson rotor–stator mixers was investigated with the aim to determine the most appropriate scaling up parameter. The largest mixer was a factory scale device, whilst the smallest was a laboratory scale mixer. All the mixers were geometrically similar and were fitted with double rotors and standard double emulsor stators. 1 wt.% silicone oils with viscosities of 9.4 mPa s and 339 mPa s in aqueous solutions of surfactant or ethanol were emulsified in single and multiple pass modes. The effect of rotor speed, flow rate, dispersed phase viscosity, interfacial tension and scale on drop size distributions was investigated.     

Nicotine patch and paroxetine for smoking cessation.

Smokers (N?=?224) were randomized to 1 of 3 groups: (a) transdermal system (TNS) + placebo; (b) TNS + paroxetine (20 mg); (c) TNS + paroxetine (40 mg). Assignment to treatment was double-blind. Nicotine patch (TNS) treatment was provided for 8 weeks; paroxetine or placebo was provided for 9 weeks. Abstinence rates at Weeks 4, 10, and 26 were as follows: (a) TNS + placebo: 45%, 36%, and 25%; (b) TNS + paroxetine (20 mg): 48%, 33%, and 21 %; (c) TNS + paroxetine (40 mg): 57%, 39%, and 27%. The differences were not statistically significant. The combined treatment was more effective in reducing both craving and depression symptoms associated with smoking cessation. A subgroup analysis comparing compliant participants was also conducted. Abstinence rates at Weeks 4, 10, and 26 were as follows: (a) TNS + placebo: 46%, 35%, and 24%; (b) TNS + paroxetine (20 mg): 64%, 43%, and 33%; (c) TNS + paroxetine (40 mg): 74%, 51%, and 38%. The differences between paroxetine groups and placebo at Week 4 were statistically significant. Although paroxetine may add value to the current standard of care in excess of potential risk, more conclusive evidence is needed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The effects of multifocal refractive lenses on occipital extension and forward head posture during a visual task

The purpose of this study was to determine if a change in forward head posture and occipital extension occurred in participants who wore multifocal lenses vs. those persons with non-multifocal lenses while performing an 8-min visual reading task on a visual display unit (VDU). Forty-two healthy human participants were recruited for this study. Thirty-three participants completed the study. Fourteen participants wore multifocal lenses and 19 wore frames with non-multifocal lenses. To evaluate the degree of change of forward head posture and occipital extension digital photographs of cervical posture were taken at four different time intervals: prior to performing the reading task and at 3, 5 and 8 min during the reading task. The digital photographs were analysed utilizing a computer program. Two one-way ANOVA were utilized to determine the degree of change of forward head posture and occipital extension between groups. A significant difference was identified between groups for changes in degrees of forward head posture while performing a visual reading task on a VDU. However, no significant difference between groups was found for occipital extension while performing the same task. Multifocal wearers exhibit greater degrees of change in forward head posture and occipital extension than non-multifocal wearers. These postural changes may place them at a greater risk for musculoskeletal disorders and headaches.