Hydrothermal products of the C3MS2-C12A7-MgO system

The autoclave products of reduced steel-slag of an electronic furnace mainly containing C₃MS₂ phase were detected. The hydrothermal products of this slag included calcio-chondrodite, brucite, and hydrogarnet phases. When suitable (CaO + MgO)/SiO₂ molar ratios were chosen, C₃MS₂ can react with SiO₂ to produce calcium silicate hydrates tobermorite, xonotlite, gyrolite, and truscottite phases with different saturated water vapor pressures. The phase brucite was present along with tobermorite, whereas phases Mg-xonotlite, Mg-gyrolite, and Mg-truscottite can rarely coexist with brucite. Hydrogarnet phase disappeared when Mg-truscottite was formed.     

Theoretical studies of displacement deposition of nickel into porous silicon with ultrahigh aspect ratio

A model is developed to address the uniformity of displacement deposition of nickel inside porous silicon with an ultrahigh aspect ratio as high as 200. The nickel distribution is treated as a current distribution issue as in electrodeposition. It is shown that the deposition distribution along the pore depth exhibits a strong dependence on a polarization parameter ξ. High values of ξ correspond to mass transport limitations and lead to non-uniform distributions, whereas small ξ values, representing interfacial reaction control, produce uniform distributions. Non-uniform deposition primarily occurs at an initial stage in which the reaction is dominated by mass transfer. As the deposition process continues, the deposition rate drops to a low value, and the deposition uniformity shifts from Ni²⁺ mass transport limitations to its interfacial reaction control, leading to uniform Ni²⁺ concentration and deposition rate distributions. It is predicted that the non-uniformity at the initial stage could be remedied by increasing the bulk concentration of the nickel ions and decreasing the plating bath pH. In addition, the uniformity of the deposition distribution can be significantly improved by introducing inhibiting additive coumarin to the plating solution.     

S＆W超选择性裂解炉分区裂解探讨

介绍了S＆W超选择性裂解炉分区裂解改造的情况，包括分区裂解炉的运行情况、对后系统的影响、对产品收率的影响、投用过程存在的问题及处理。指出分区裂解能提高装置的生产能力，而产品的收率基本不变。     

纤维素衍生化手性固定相的制备和对噻吗洛尔拆分

用超声方法合成了三(3,5-二硝基苯甲酰基)纤维素(CTNB)、三(4-溴苯甲酰基)纤维素(CTBB)、三(苯甲酰基)纤维素(CTB)、三(4-甲基苯甲酰基)纤维素(CTMB)、三(4-硝基苯甲酰基)纤维素(CTPB).将此类衍生化纤维素作为薄层色谱的手性固定相,结合展开剂的优化,对噻吗洛尔对映体进行拆分研究,并对衍生化取代基对拆分效果的影响以及对映体在手性固定相上的拆分机理进行了详细的探讨.     

Prediction of mean square radius of gyration of tree-like polymers by a general kinetic approach

This paper describes a kinetic method to predict the z-average molecular mean square radius of gyration of tree-like polymers formed by irreversible reactions, assuming Gaussian chains. It is based on the population balance equations for the two-sided molecular distributions of pendant chains associated with every chemically distinguishable kind of bonds. An automated method for the solution of those equations is valid both before as well as after gelation for complex kinetic schemes. Examples of its use are presented with polycondensation systems leading to hyperbranched polymers, the anionic polymerization of mono- and divinyl monomers and a radical polymerization with terminal branching and transfer to polymer.     

聚甲基丙烯酸缩水甘油酯为主链的咪唑型螯合树脂的合成、表征及吸附性能研究

用分散聚合法合成了聚甲基丙烯酸缩水甘油酯(PGMA),然后引入咪唑功能基合成了螯合树脂(PGMA-Imi),用傅立叶变换红外光谱(FTIR)与扫描电镜(SEM)研究了其结构与粒子表面形态,元素分析测定功能基含量,并对Cu2+等离子进行了吸附研究。结果表明所得PGMA微球为微米级、单分散性很好,所得螯合树脂(PGMA-Imi)对Cu2+的吸附效果最好。     

由双环戊二烯制备环戊烷

对以双环戊二烯为原料,经解聚、加氢制备环戊烷的工艺进行了研究,重点考察了环戊二烯加氢条件。结果表明:在Raney镍催化剂加入量为0.5％～2％,加氢压力为0.5～3.0MPa,加氢温度为30～50℃时,环戊二烯的加氢转化率约为100％,加氢选择性也在99％以上,由双环戊二烯制备环戊烷的总收率>60％,产品的纯度在99％以上。     

Cracking and the Indentation Size Effect for Knoop Hardness of Glasses

The Knoop hardnesses of five glasses decreased with increasing load in accordance with the classic indentation size effect (ISE). At moderate loads, cracking dramatically altered the indentation sizes and the ISE trends in three of the five glasses. Cracked indentations were as much as 10 μm longer than uncracked indentations made under identical conditions. Diagonal length readings must be corrected for optical resolution limitations if low power lenses are used.     

Phase Relationships in the ZrO2-Sc2O3 and ZrO2-In2O3 Systems

Zirconia-rich subsolidus phase relationships in the ZrO₂–Sc₂O₃ and ZrO₂–In₂O₃ systems were investigated. Phase inconsistencies in the ZrO₂–Sc₂O₃ system resulted from a diffusionless cubic-to-tetragonal ( t' ) phase transformation not being recognized in the past. Through three different measuring techniques, along with microstructural observations, the solubility limits of the tetragonal and cubic phases were determined.     

Synthesis and characterization of thermosensitive composite microsphere latex

Monodisperse aqueous latex dispersions, prepared from mixtures of styrene, N‐isopropylacrylamide, and N,N′‐methylenebisacrylamide, were characterized. Thermosensitive composite microspheres with diameters greater than 1.0 μm, consisting of a polystyrene core and a poly(N‐isopropylacrylamide) shell, were prepared. The morphology of the composite microspheres was observed with transmission electron microscopy, and the particle size of the composite microspheres was estimated with dynamic light scattering. The thermosensitive properties of the composite microspheres were evaluated via the hydrodynamic size of the composite microspheres. The particle size of the composite microspheres decreased with increasing temperature. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 824–828, 2005