Scaling up effects of Mg hydride in a temperature and pressure-controlled hydrogen storage device

A research program addressed to evaluate the magnesium hydride storage scaling up effects is being developed by CESI RICERCA, Milano, and the Hydrogen Group of Padova University. A storage device containing 500 g of magnesium hydride powder (manufactured by Venezia Tecnologie S.p.A. using high-energy ball milling) has been designed and tested in different operating conditions. A number of absorption and desorption cycles at different temperatures and pressures has been carried out in order to see if the results are comparable with laboratory data obtained on small amounts (fractions of grams) of powder samples. A sensible performance degradation that reduced the overall storage capacity of about 50% has been noticed after 20 cycles, presumably due to local powder heating, fragmentation and subsequent compaction. Further tests on a smaller tank equipped also with a porous baffle gave useful indications for the design of an improved large hydrogen reservoir.     

Low-enthalpy geothermal energy: An opportunity to meet increasing energy needs and reduce CO2 and atmospheric pollutant emissions in Piemonte,Italy

The scope for diffusion of very low-enthalpy geothermal plants in the Piemonte region of Italy, using groundwater heat pumps (GWHP), was analyzed to check environmental sustainability and the benefits in terms of reducing greenhouse gas emissions from fossil fuels. GWHP implementation seemed particularly suitable to the specific characteristics of the Piemonte plain. An important thick and productive shallow aquifer is present across the entire plain beneath the major energy users and is therefore appropriate for geothermal energy development purposes. The building stock could be adapted to heat pumps in different ways, but objective-oriented policies will be required to reach the best results in terms of environmental benefits.     

The Effect of Support on Sulphur Tolerance of Rh Based Catalysts for Methane Partial Oxidation

The presence of sulphur containing compounds, naturally occurring in natural gas or added as odorants, can adversely affect the performance of noble metals based catalysts for the partial oxidation of methane to syngas. In this paper the effect of SO₂ addition on the catalytic partial oxidation of methane was investigated on Rh (1 wt.%) catalysts prepared by incipient wetness impregnation method on two different commercially available high temperature γ-alumina supports stabilized either with 10% SiO₂ or 3% La₂O₃. Based on the results of catalytic activity measurements and in-situ FT-IR spectroscopic characterisation, as well as TPR/TPD studies, it has been shown that the presence of sulphur can severely suppress the formation of synthesis gas by inhibiting the reforming reactions during the catalytic partial oxidation of methane. The results also demonstrated that the support plays a crucial role in the partial oxidation reaction. In the presence of a sulphating support such as La₂O₃–Al₂O₃ the partial oxidation reaction was much less inhibited than a less sulphating support such as SiO₂–Al₂O₃. The sulphating support acts as a sulphur storage reservoir, which minimises the poison from adsorbing on or near the active Rh sites where reactions take place.     

Solvent-induced crystallization of syndiotactic polystyrene in different liquids—sorption and diffusion phenomena

Transport properties of different liquids inducing crystallization in syndiotactic polystyrene (sPS) were investigated at 25°C. The weight uptake kinetics in the different liquids imply Fickian behaviour, with the exclusion of n-hexane and cyclohexane for which the weight uptake starts after an induction time. The equilibrium concentration of the different liquids in sPS is a function of the solubility parameter and shows a maximum with respect to chloroform, indicating a maximum in the polymer-solvent interaction. The swollen samples are birefringent but appear substantially amorphous on the basis of the X-ray diffractograms. After drying a well developed crystalline order appears, and the diffractograms indicate the presence of solvated structures, characterized by chains in helical conformation.     

Influence of loading method and stocking density during transport on meat and dry-cured ham quality in pigs with different halothane genotypes

The effect of loading method and stocking density in transit on meat and dry-cured ham quality was investigated in pigs with different halothane genotypes. A total of 507 Italian heavy pigs, supplied by two farms, were loaded by ramp or lift and transported unmixed for 35–55 min to the abattoir at a stocking density of either <0.4 or >0.6m² per 100 kg pigs. After overnight lairage in separate pens with free access to water, the pigs were slaughtered. Halothane genotype was assessed post mortem. Four hundred and thirty-nine pigs had a homozygous dominant (NN) genotype and 68 pigs were heterozygous (Nn). Carcass skin damage, meat quality traits and ham curing parameters were evaluated. Loading method and stocking density showed a negligible effect on meat and dry-cured ham quality while the predominant factor affecting these was the halothane genotype. Nn pigs produced meat with a faster rate of pH fall and lower water holding capacity as well as ham with higher weight losses in salting and greater incidence of defects in the dry-cured product. There were insignificant interactions between halothane genotype and loading method or stocking density. Overall, irrespective of pre-slaughter treatment, the Nn pigs were less suitable for the production of high quality products such as dry-cured ham.     

Crossover enhancements in GEFREX

This letter describes some improvements to the crossover operator in the genetic-neuro-fuzzy algorithm called genetic fuzzy rule extractor (GEFREX). Although, the new crossovers studied are very simple, the performance of GEFREX, in terms of learning time, is decidedly improved.     

Traumatic brain injury and memory: The role of hippocampal atrophy.

In traumatically brain-injured (TBI) patients (n?=?83), memory performance was examined on the Warrington Recognition Memory Test, Rey-Osterrieth Complex Figure, and the Logical Memory and Visual Reproduction subtests of the Wechsler Memory Scale-Revised in relationship to time postinjury and structural changes based on MRI volumetry, including hippocampus volume. Significant trauma-induced changes were observed, including hippocampal atrophy. Structure-function relationships generally became significant only after 90 days postinjury. Memory tended to relate more to the degree of hippocampal atrophy, particularly left hippocampus, than to nonspecific indicators such as the temporal horns or the ventricle-to-brain ratio. A stronger relationship with left versus right hippocampus was evident for measures of verbal and supposedly nonverbal memory. These results are discussed with regard to the role the hippocampus may play in a neural system of memory. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

BIODEGRADATION PROCESS ANALYSIS BY ULTRAFILTRATION

Detailed analysis of biological processes for hazardous waste-water treatment presents extreme difficulty. Complexity of organic and inorganic solute mixtures in solution prohibits GC-MS analysis. Gross parameters must be used to monitor treatment process performance. Ultrafiltration, coupled with gross parameter estimation, provides enhanced definition of treatment. Results, employed to monitor in-situ biodegradation of a hazardous landfill leachate, are discussed.     

Signatures: A language extension for improving type abstraction and subtype polymorphism in C++

C++ uses inheritance as a substitute for subtype polymorphism. We give examples where this makes the type system too inflexible. We then describe a conservative language extension that allows a programmer to define an abstract type hierarchy independent of any implementation hierarchies, to retroactively abstract over an implementation, and to decouple subtyping from inheritance. This extension gives the user more of the flexibility of dynamic typing while retaining the efficiency and security of static typing. With default implementations and views flexible mechanisms are provided for implementing an abstract type by different concrete class types. We first show how the language extension can be implemented in a preprocessor to a C++ compiler, and then detail and analyse the efficiency of an implementation we directly incorporated in the GNU C++ compiler.