Analytical study on cantilever resonance type magnet-integrated sensor device for micro-magnetic field detection

A beam-shaped cantilever resonance type magnetic sensor device has been proposed with a micro magnet. Two structural designs, named as design 1 and design 2, have been comparatively analyzed using ANSYS in order to obtain larger frequency shifts (higher magnetism sensitivity) due to the applied exterior magnetic field. The analytical results show that, in the range of 0–10 mT, the frequency shifts are small, while under 100 mT, a relatively larger frequency shift of about 30 Hz can be theoretically obtained. The power consumption of the proposed devices has been further theoretically studied for preliminary understanding. Using the well-known displacement equations, the estimated power consumption is around 0.21 μW, which is very lower than that of the reported magnetic field sensors. This implies that it is possible to fabricate higher sensitive magnetic field sensor with lower power consumption.     

Ultra light-weight and high-resolution X-ray mirrors using DRIE and X-ray LIGA techniques for space X-ray telescopes

We are developing novel ultra light-weight and high-resolution X-ray micro pore optics for space X-ray telescopes. In our method, curvilinear micro pore structures are firstly fabricated by silicon deep reactive ion etching (DRIE) or X-ray LIGA processes. Secondly, side walls of the micro structures are smoothed by magnetic field assisted finishing and/or hydrogen annealing techniques for high reflectivity mirrors. Thirdly, to focus parallel X-ray lights from astronomical objects, these structures are elastically or plastically bent into a spherical shape. Fourthly, the bent structures are stacked to form a multi-stage X-ray telescope. In this paper, we report on fabrication and X-ray reflection tests of silicon and nickel X-ray mirrors using the DRIE and LIGA processes, respectively. For the first time, X-ray reflections were confirmed on both of the mirrors. Estimated rms roughnesses were 5 nm and 3 nm for the silicon and nickel mirrors, respectively.     

Straight-through microchannel devices for generating monodisperse emulsion droplets several microns in size

The authors recently proposed a promising technique for producing monodisperse emulsions using a straight-through microchannel (MC) device composed of an array of microfabricated oblong holes. This research developed new straight-through MC devices with tens of thousands of oblong channels of several microns in size on a silicon-on-insulator plate, and investigated the emulsification characteristics using the microfabricated straight-through MC devices. Monodisperse oil-in-water (O/W) and W/O emulsions with average droplet diameters of 4.4–9.8 μm and coefficients of variation of less than 6% were stably produced using surface-treated straight-through MC devices that included uniformly sized oblong channels with equivalent diameters of 1.7–5.4 μm. The droplet size of the resultant emulsions depended greatly on the size of the preceding oblong channels. The emulsification process using the straight-through MC devices developed in this research had very high apparent energy efficiencies of 47–60%, defined as (actual energy input applied to droplet generation/theoretical minimum energy input necessary for making droplets) × 100. Straight-through MC devices with numerous oblong microfluidic channels also have great potential for increasing the productivity of monodisperse fine emulsions.     

An anaerobic bacterium isolated from Japanese spiny lobster Panulirus japonicus

Eight strains of bacteria which could not grow under aerobic conditions, were isolated from Japanese spiny lobster. All the strains were Gram-positive, non-sporeforming cocci, and grew well under anaerobic conditions. The strains required a decreased oxygen tension rather than an increased CO₂ tension. Catalase, oxidase, nitrate reductase and urease were not produced. The strains fermented glucose, cellobiose, trehalose and levulose. Indole and H₂S were not produced. Macromolecule substances including starch, esculin, casein, gelatin and chitin were not hydrolyzed. Lactic acid was the sole product from peptone-yeast extract-Fildes solution-glucose broth. Fermentable carbohydrates were not required. The strains could grow at 20 to 37°C, and required NaCl for growth. From the above results, the strains were identified as anaerobic (aerotolerant) Streptococcus sp.     

Design and calibration of curved and see-through integral imaging 3D display

Virtual Reality - Heads-up displays that are ‘see-through’ and ‘curved’ and capable of displaying 3D contents are considered crucial for augmented reality-based navigation...     

Electron cyclotron resonance plasma production by using pulse mode microwaves and dependences of ion beam current and plasma parameters on the pulse condition

We measure the ion beam current and the plasma parameters by using the pulse mode microwave operation in the first stage of a tandem type ECRIS. The time averaged extracted ion beam current in the pulse mode operation is larger than that of the cw mode operation with the same averaged microwave power. The electron density n(e) in the pulse mode is higher and the electron temperature T(e) is lower than those of the cw mode operation. These plasma parameters are considered to cause in the increase of the ion beam current and are suitable to produce molecular or cluster ions.     

Effect of different features to drill-wear prediction with back propagation neural network

In this paper, a back propagation neural network (BPNN) has been applied to predict the corner wear of a high speed steel (HSS) drill bit for drilling on different workpiece materials. Specially defined static and dynamic features extracted by a wavelet packet transform (WPT) from the resultant force converted from thrust and torque together with the cutting conditions (workpiece material, spindle speed, drill diameter, feed rate) are used as inputs to train the network to obtain a better output, drill corner wear. Drilling experiments have been carried out over a wide range and, features newly defined and conventional ones, features extracted from different frequency bands are compared.