Photovaractor for remote optical control of microwave circuits

A photovaractor for the remote optical control of microwave circuits was studied. The photovaractor was fabricated as a p-i-n photodiode placed in a pigtailed fiber optical module. The study of the impedance in the frequency range up to 3 GHz in darkness and under illumination has shown that the photovaractor capacitance strongly depends on the incident optical power. The capacitance variation of the photovaractor diode under illumination is discussed     

Relation between abrasion resistance and flexural strength of high volume fly ash concrete

In this paper, abrasion of high volume fly ash (HVFA) concretes made with 50% and 70% of cement replacement with fly ash was assessed in terms of its relation to flexural tensile strength. Comparisons were made between normal Portland cement (NPC) concrete and fly ash concrete. Comparisons were also made between fly ash concretes. Investigation results have shown that the abrasion resistance increased as flexural tensile strength increased. Analysis of the results showed that, for concrete with tensile strength of greater than 4–5 MPa, the abrasion resistance of HVFA concrete with 70% replacement with cement was found to be higher than that of counterpart control NPC concrete and concrete made with 50% fly ash. The comparison between the relation of abrasion to compressive strength and abrasion to flexural tensile strength made in terms of R² of the linear regression showed that a stronger relation existed between abrasion and flexural tensile strength than that of abrasion to compressive strength of the concrete studied.

---

Résumé L'étude a pour but d'estimer la relation entre la résistance à l'usure avec la résistance à la traction en flexion des bétons contenant de 50% et 70% de cendres volantes. On a comparé le béton pur au béton contenant des cendres volantes. Des comparaisons ont été faites également entre les différents bétons contenant des cendres volantes. Les resultats de la recherche ont montré que la résistance à l'usure augmente à mesure que la résistance à la traction en flexion de 4∼5 MPa ont une résistance à l'usure plus grande s'ils contienneint 70% de cendres volantes que s'ils étaient purs ou contenaient 50% de cendres volantes. La comparaison entre les relation de la résistance à l'usure en compression et de la résistance à l'usure en traction a été établie en termes de R² de la régression linéaire. On a prouvé qu'une relation plus forte a été obtenue entre la résistance à l'usure et la résistance à la traction en flexion par rapport à la résistance à l'usure en compression du béton étudié.

     

Rupture or stress injury of the flexor tendon pulleys? Early diagnosis with MRI

In node-positive breast carcinoma, the presence of tumour cells in the efferent vessels (EV) of the axillary nodes (positive EV status) was shown to be of poor prognosis in 1979. Later the presence of nodal micrometastases was also related to survival. This report describes a new subgroup in this system that is of potential therapeutic interest. It consisted of the 40% of the EV-positive cases with micrometastases (< 0.2 cm2) in their nodes, in addition to nodes with macrometastases. In them the difference in prognosis associated with EV status no longer held. Their prognosis did not differ markedly from that in the EV-negative patients. In the absence of such 'additional' micrometastases, the prognostic difference was still highly significant. There was also some indication that the presence of micrometastases consisting of embolic tumour growth alone may be associated with early death in EV-negative cases, in keeping with the prognosis in cases with lone micrometastases.     

Analysis of line-commutated converters during unbalanced operatingconditions

In this paper, a method of analyzing the salient performance characteristics of line-commutated power converters during unbalanced operating conditions is presented. Simple analytical relationships are established which relate the negative-sequence component of AC current to the negative-sequence component of voltage. These results are verified using a detailed valve-by-valve simulation of a line-commutated inverter connected to a photovoltaic array     

A numerical investigation on the geometry dependence of the crack growth resistance in CT specimens

The influence of the specimen thickness B and the ligament length b on the J _R -curves is numerically investigated for CT specimens. The thickness effect is taken into account with 2-D analyses by dividing a plain sided specimen into a plane stress part and a plane strain part. The fracture process is controlled by experimentally determined critical values of the crack tip opening displacement for crack growth initiation (CTOD_i) and the crack tip opening angle for stable crack growth (CTOA_C). It is shown that for the global behaviour of a plain sided specimen, the B/b ratio is essential. The difference between the geometry dependence of the initiation value of the J-integral and the geometry dependence of the slope of the J _R -curves is also shown.     

Dynamics of Crust Formation and Kinetics of Quality Changes During Frying of Meatballs

Mathematical models describing dynamics of crust formation and kinetics of crust color and firmness changes were developed for the deep-fat frying of beef meatballs. Good agreement (R2 ranged between 0.815 and 0.987) was observed between experimental and predicted data. Crust color lightness, redness, and yellowness decreased exponentially with frying time while total color change increased. All color parameters followed first order reaction kinetics. Meatball firmness was measured by peak force obtained from a puncture test whose kinetics model had a reaction rate constant of 5.39E-3 1/(s.N^n-1) and a reaction order of 0.0013.