Concurrent denitrification and oxygen uptake in microbial films

Mixed microbial films were grown on the inner walls of a tubular reactor with recirculation of the reactor contents and continuous flow-through of nutrient solution. The loss of total oxidized nitrogen was correlated to the film population, the nitrite concentration and the dissolved oxygen concentration in the reactor. When film population was greater than 0.5 × 10⁹ cells cm⁻², reactor dissolved oxygen concentration greater than 1 mg l⁻¹ had little effect on the nitrate loss. Nitrate loss declined for film populations greater than 2 × 10⁹ cells cm⁻². Models based on Monod and zero-order microbial kinetics were calibrated using these data and a nonlinear least squares method. There was little difference in the residual errors with these methods.     

Indirect check of aggregate pore effects on concrete

It is very difficult to quantify aggregate pores directly in a way that allows pore/water interaction to be accurately related to hardened concrete properties. This work examines, a number of aggregates through water absorption checks and gives results of tests on some concretes made with them. Three especially relevant concrete properties are examined, initial surface absorption, freeze/thaw behaviour and drying shrinkage; it is shown that aggregate absorption is reflected in these properties.     

Tunnelling projects in Southern Africa

Until some thirty years ago tunnelling in southern Africa for civil engineering purposes had been on a relatively small scale and of a sporadic nature. The first major tunnel to be built in the region was the 82 km long Orange-Fish Tunnel. Since 1970 more than 175 tunnels with an aggregate length of just over 400 km have been built. Much of the first phase of the Lesotho Highlands Water Project, which will have more than 100 km of tunnels, is about to be completed. The last thirty years represent the busiest period of tunnelling by civil engineers that southern Africa has ever known. The paper starts by summarising the early history of tunnelling in the region, and goes onto describe recent and current tunnelling projects. It also gives an indication of the possible demand for tunnels in the future.     

A research about a method for restoration of traditional lime mortars and plasters: A staging system approach

Turkey is quite rich with historical buildings. Depending on various factors like time, increasing air pollution due to technological improvements of the present era together with insufficiency of inspection leads to the formation of damages on these buildings which are part of our historical heritage. Conservation of such buildings which are as important as historical documents should be the first and foremost target of any project. Where maintenance is insufficient, conservation and restoration attempts should replace it. What is necessary in restoration is the use of material which resembles the original material to the closest degree or, producing appropriate material which is compatible with the properties of the original material. The first dimension of the current problem is the insufficiency of resources while the second dimension stems from the lack of proper evaluation of the material to be used in conservation and restoration. This study defines the importance of mortars and plasters along with their history and the reasons of deterioration. In addition, it sets up the information flow of mortar and plaster within a systematic decision making process. The necessary experimental methods for the production of new repair mortar or plaster that can be used in determining the character analysis of original mortar and deterioration morphology are also analyzed. Thus, a method that can be used in the conservation and restoration studies is determined with this paper.     

Determination of flexibility of beam-to-column connectors used in thin walled cold-formed steel pallet racking systems

This paper describes a new test to determine flexibility of beam-to-column connectors used in conventional pallet racking systems. In this study, two different ways were used to find the flexibility of a connector. The connector developed was tested using the conventional cantilever method [Bajoria, KM. Three dimensional progressive collapse of warehouse racking, PhD Thesis, University of Cambridge, UK 1986], and then also using a newly proposed double cantilever method. To verify the results obtained from both the tests, a full scale frame test was carried out. In the double cantilever test the connector is subjected to three types of forces namely moment, shear and the axial pull by the beams, thereby giving behavior close to practical usage of connectors. Non-linear finite element analysis of both the tests and also of the full scale test were carried out using ANSYS [ANSYS 7.0—User's Manual, ANSYS Inc., 2005] software. The results obtained from the double cantilever test were found to match well with the full scale frame test. The experimental results and the finite element results are compared in this paper.     

Aggregate and concrete microfracture

Thin sections cut from cast concrete cylinders have been examined in transmitted light to investigate the significance of coarse aggregate type in “primary” microfracturing. Concretes manufactured with crushed-rock aggregates and gravel aggregates were studied and, in every case, the dominant fracture type was a parting of the aggregate-matrix bond. Bond cracking was least severe with the marble aggregate where epitaxial calcite over-growth was indicated. The ability of bond cracks to maintain continuity by bridging surface irregularities, via mortar cracks, reduced the inhibiting influence of rough-surfaced aggregate on bond-crack development.     

Spatial and temporal evolution of trihalomethanes in three water distribution systems

Spatial and seasonal changes in trihalomethane (THM) concentrations were investigated in three distribution systems of Quebec (Canada) which are supplied by different surface waters and which use a variety of physicochemical treatment strategies. The investigation was based on an intensive 25-week sampling programme, undertaken at a time of year when the temperature of southern Quebec surface waters exceeds 4 degrees C (April-November). THMs and other water quality and operational parameters were monitored at points along the distribution system--between the treatment plant and the system extremities--which represented variable residence times of water. Results showed that THM concentrations vary significantly (from 1.5 to 2 times, depending on the utility) between finished waters as they leave the plant and water at the system extremities. When water temperature exceeds 15 degrees C, spatial THM variations are particularly high (from 2 to 4 times, depending on the utility). The development of multivariate regression models showed that water temperature was a better predictor of THM seasonal variability than chlorine dose, surrogates of natural organic matter and pH. Also, initial THM formation (in finished waters leaving the plant) was a good predictor of THM levels at distribution system extremities.     

Toxicity, accumulation and elimination studies of α-hexachlorocyclohexane (α-HCH) with freshwater organisms of different trophic levels

A short- and long-term toxicity study with α-hexachlorocyclohexane (α-HCH) was carried out with freshwater organisms of different trophic levels (algae, crustaceae and fishes). In this study mortality, immobilization, growth, reproduction, histopathologic changes and enzyme activities were chosen as criteria.Furthermore accumulation and elimination processes were investigated in separate organisms as well as the uptake of α-HCH by one organism and through a food-chain.Finally a tentative method for deriving an “ecological limit” for χ-HCH in surface water is described.     

Oscillations of Foundations Installed on the Ground and Cast-in-Place Piles Subject to Kinematic Effects

Results are presented for experimental investigations on the traffic-induced oscillations of two full-scale foundations of a metallic tunnel, one of which is installed directly on the ground, and the other on cast-in-place piles. The foundations are close to one another with respect to mass and the load applied to them. Differences are revealed between the parameters of the actual oscillations of these foundations and their computed values.