Heat flow near Orlando,Florida and Uvalde,Texas determined from well cuttings

Heat flow has been determined in a borehole near Orlando. Florida and another near Uvalde, Texas. Thermal conductivities in both boreholes were obtained by divided-bar measurements on rock discs and by needle-probe measurements on rock chips. For the needle-probe method, the rock chips were pulverized into powder, saturated with water, and the conductivity of the solid rock was obtained from the conductivity of the mixture by an empirical relationship. Divided-bar measurements for the Florida borehole indicate a heat flow of 0.92 = .03 H.F.U., while needle-probe measurements on rock chips show a heat flow of 1.24 = .06 H.F.U. The discrepancy is attributed to anisotropy of the sedimentary rocks penetrated by the borehole. Heat flow obtained from these two different methods of determining conductivity show good agreement in the Texas borehole. Divided-bar measurements indicate a heat flow of 1.08 = .03 H.F.U. while the chip technique gives a value of 1.13 = .03 H.F.U.     

Release of reduced inorganic selenium species into waters by the green fresh water algae Chlorella vulgaris

The common green fresh water algae Chlorella vulgaris was exposed to starting concentrations of 10 μg/L selenium in the form of selenate, selenite, or selenocyanate (SeCN(-)) for nine days in 10% Bold's basal medium. Uptake of selenate was more pronounced than that of selenite, and there was very little uptake of selenocyanate. Upon uptake of selenate, significant quantities of selenite and selenocyanate were produced by the algae and released back into the growth medium; no selenocyanate was released after selenite uptake. Release of the reduced metabolites after selenate exposure appeared to coincide with increasing esterase activity in solution, indicating that cell death (lysis) was the primary emission pathway. This is the first observation of biotic formation of selenocyanate and its release into waters from a nonindustrial source. The potential environmental implications of this laboratory observation are discussed with respect to the fate of selenium in impacted aquatic systems, the ecotoxicology of selenium bioaccumulation, and the interpretation of environmental selenium speciation data generated, using methods incapable of positively identifying reduced inorganic selenium species, such as selenocyanate.     

Preparation of the Ge(001) surface towards fabrication of atomic-scale germanium devices

We demonstrate the preparation of a clean Ge(001) surface with minimal roughness (RMS ~0.6 ?), low defect densities (~0.2% ML) and wide mono-atomic terraces (~80-100 nm). We use an ex situ wet chemical process combined with an in situ anneal treatment followed by a homoepitaxial buffer layer grown by molecular beam epitaxy and a subsequent final thermal anneal. Using scanning tunneling microscopy, we investigate the effect on the surface morphology of using different chemical reagents, concentrations as well as substrate temperature during growth. Such a high quality Ge(001) surface enables the formation of defect-free H-terminated Ge surfaces for subsequent patterning of atomic-scale devices by scanning tunneling lithography. We have achieved atomic-scale dangling bond wire structures 1.6 nm wide and 40 nm long as well as large, micron-size patterns with clear contrast of lithography in STM images.     

The visual detectability analysis associate

The outcome of this work is a knowledge-based associate ergonomic tool that assists in determining visibility of stationary small objects critical to the work environment. The Luchlesh and Moss detection solid, a design handbook guideline, accounts for non-search visibility in terms of three fundamental variables — visual angle, brightness and contrast. To reduce the difficulty of using the solid in its current form, this effort first quantified the empirical relationships of the solid. The intelligent system building tool, Exsys, was then employed: (1) to convert the results into rules for a knowledge base, and (2) to generate a tool called the Visual Detectability Analysis Associate. An efficient, convenient and easy to use ergonomic design tool is now available that determines visibility of small stationary objects in work environments where viewing time may be limited, but visual search is not required. In current use by a company to solve visibility problems encountered in system design, the VDAA tool has demonstrated beneficial savings in both time and effort.     

Neutrophil accumulation is reduced during partial liquid ventilation

OBJECTIVE: This study evaluates the ability of perflubron to inhibit pulmonary neutrophil accumulation during partial liquid ventilation (PLV) in the setting of acute lung injury. DESIGN: Randomized, controlled, nonblinded study. SETTING: Research laboratory at a university. SUBJECTS: Male, Sprague-Dawley rats (n = 120, 506 +/- 42 g). INTERVENTIONS: Animals were divided into eight groups (n = 15 in each group, of which n = 12 for myeloperoxidase content and n = 3 for histologic neutrophil counting): a) GV-CVF group, animals received gas ventilation (GV) with the induction of lung injury using cobra venom factor (CVF); b) PLV-CVF group, animals received partial liquid ventilation before the induction of lung injury; c) PEEP-CVF group, animals received positive end-expiratory pressure (PEEP) before the administration of cobra venom factor; d) CVF-PLV group, animals received partial liquid ventilation after cobra venom factor; e) CVF-PEEP group, animals received PEEP after cobra venom factor; f) PLV only group, animals received partial liquid ventilation only; g) GV only group, animals received gas ventilation only; and h) NVSBA group, nonventilated spontaneous breathing animals. MEASUREMENTS AND MAIN RESULTS: After the experimental period, total lung myeloperoxidase content was significantly decreased in the PLV-CVF (0.29 +/- 0.08, p = .02) and PEEP-CVF (0.34 +/- 0.04, p = .01) groups when compared with the GV-CVF group (0.62 +/- 0.07). When compared with the GV-CVF group, a trend toward a reduction in myeloperoxidase was observed in the CVF-PLV (0.42 +/- 0.05, p = .07) and the CVF-PEEP (0.39 +/- 0.06, p = .07) groups. When compared with the cobra venom factor only group (GV-CVF 47 +/- 2 neutrophils/high-power field), reductions in neutrophil count were observed in all groups (neutrophils/high-power field): PLV-CVF (20 +/- 2, p = .009); PEEP-CVF (24 +/- 1, p = .01); CVF-PLV (30 +/- 2, p = .03); and CVF-PEEP (37 +/- 1, p = .04). CONCLUSION: These data suggest that both partial liquid ventilation and PEEP result in a reduction in neutrophil accumulation in the setting of acute lung injury.     

Dental practice patterns. II: Treatment related to oral health status

We report and describe the clinical findings of three patients who developed atonic pupil after uncomplicated extracapsular cataract extraction with posterior chamber intraocular lens implantation. All patients had normally reactive pupils one day postoperatively, but after two weeks, the pupils were dilated and nonreactive to light, accommodation, and miotics. To estimate the incidence of atonic pupil after cataract surgery, we sent a survey on the frequency, clinical features, and possible etiologies of this syndrome to members of the American Society of Cataract and Refractive Surgery. Of the 567 respondents, 60% had seen at least one case of atonic pupil in the past five years; they reported a total of 1543 cases during that time. This is probably a conservative figure since many cases undoubtedly go unnoticed because of a lack of visual disturbance. We believe this condition occurs more frequently than previously reported. The atonic pupil should be recognized as a possible complication of cataract surgery that should be included in the preoperative consent form.