四相永磁容错电机短路故障容错策略

四相永磁容错电机采用被容错齿隔开的集中式绕组结构,本质上具有一定的容错能力和故障出现后连续运行的能力.针对H桥和星形这两种驱动拓扑结构,在发生单相绕组出线端部短路时,以容错控制后的转矩满足正常需求为目标,分别采用直接转矩补偿方法和旋转磁动势不变方法进行容错控制;对两种容错控制策略进行了推导和对比分析,并对相关结果进行了磁-路联合仿真计算,验证了理论分析的正确性.     

Conducting blends of poly(o‐toluidine) and ethylene–propylene–diene terpolymer

Poly(o‐toluidine) (POT) is an electroactive polymer with poor mechanical and thermal characteristics. We examined the scope for improving such properties by making blends of POT with ethylene–propylene–diene rubber (EPDM). We prepared POT–EPDM blends containing different weight fractions of POT by intimately mixing known volumes of separate solutions of the two polymers (POT in THF and EPDM in toluene). Films of EPDM and POT–EPDM blends in solution were obtained by spreading, solvent evaporation, and film casting techniques. POT, EPDM, and their blends were characterized in solution by ultraviolet‐visible spectroscopy, and the respective dried samples were analyzed by Fourier transform infrared spectroscopy and thermogravimetry. The polymer samples were further analyzed morphologically by scanning electron microscopy, and their tensile strengths were also evaluated. Spectroscopic and thermal studies of the blends indicated some sort of interaction between the two constituent polymers. The direct current electrical conductivity of the blends in increasing order of POT loading (12.5–100%) was in the range 9.9 × 10^?5 to 11.6 × 10^?2 S cm^?1. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2550–2555, 2003     

Radiation-induced copolymerization of trioxane with tetrahydrofuran

Radiation-initiated copolymerization of solid trioxane (TOX) with tetrahydrofuran (THF) was investigated. The effects of radiation dose, THF concentration, and post-polymerization temperature and duration on copolymer yield and THF incorporation were studied. These results are compared with the results of TOX homopolymerization under identical conditions. Copolymer yield was lower than that of homopolymer. Only a fraction of charged THF entered into the polymer chain. THF content and radiation dose also altered the MW of the copolymer but it showed better thermal stability. The initial reaction rates of the copolymerization were determined and from these the activation energy was found to be 36.2 kcal mol^?1.     

汛限水位动态控制在石门水库主汛期调度中的应用研究

在汛限水位静态控制的运行方式下常导致水库汛期不敢蓄水,汛后库水位却常常达不到正常蓄水位,极大地限制了水库兴利效益,造成水资源浪费。以石门水库为例,针对其静态汛限水位运行的现状,分析该运行方式下对水库兴利效益的影响,提出采用汛限水位动态控制的方法来提高水资源利用率。实际调度中,结合石门水库天气、水文等预报信息,采用预蓄预泄方法,分析汛限水位动态控制的上下限,给出了动态控制的调度策略,并以"20110728"洪水对比了两种调度方式。结果表明:当预报降雨或洪水偏小时,可抬高汛限水位最高至617.5 m,拦蓄洪尾,有效增加水库的蓄水量;当预报降雨或洪水偏大时,可降低汛限水位最低至610.0 m,腾空库容,迎接洪水。     

原油及油品体系微生物损害的研究

油品在加工、储运过程中存在着许多适宜于微生物生长繁殖的环境,有充足的碳源、水、氧和所需的其它有机物、无机物。当微生物在某一环节大量繁殖后,将造成油品的污染、降级;长期带菌,也会给设备带来严重的腐蚀和损坏。探讨了以脱硫弧菌、脱氮硫杆菌、亚铁杆菌为代表的有害厌氧菌和好氧菌的腐蚀机理,总结了微生物腐蚀的几种方式。最后概括了原油及油品体系的杀菌现状,并介绍了一种新型油品专用杀菌剂。     

Preparation of dibasic acid-containing soy phospholipids by chemical and enzyme-catalyzed transesterification and evaluation of their surface-active properties

The preparation of dibasic acid-containing soy phospholipid was made by transesterification reaction with alkyl ester of diabasic acid with both lipase and alkoxide as a catalyst. The extent of incorporation of a dibasic acid varied with the molecular size of the dibasic acid. The extent of incorporation in soy phospholipids was 4–13% in the case of adipic acid and 9–20% in the case of sebacic acid. The surface-active properties of these modified soy phospholipids were examined and were found to be different from those of the original (unmodified) soy phospholipid. The interfacial properties such as critical micelle concentration (CMC), γ_CMC, surface excess concentration Γ_max, and minimum area per molecule (Å), and thermodynamic parameters such as standard free energy of micellization, were found to depend on the hydrophobic part of the dibasic acids.     

Reactively compatibilised polyamide6/ethylene-co-vinyl acetate blends: mechanical properties and morphology

Mechanical properties and morphological studies of compatibilised blends of PA6/EVA-g-MA and PA6/EVA/EVA-g-MA were studied as functions of maleic anhydride content (MA) and dispersed phase (EVA-g-MA) concentrations, respectively at blending composition of 20 wt% dispersed phase (EVA-g-MA or combination of EVA and EVA-g-MA). The maleic anhydride (MA) was varied from 1 to 6 wt% in the PA6/EVA-g-MA blend, whereas MA concentration was fixed at 2 wt% in the ternary compositions with varying level of EVA-g-MA. ATR-IR spectroscopy revealed the formation of in situ copolymer during reactive compatibilisation of PA6 and EVA-g-MA. It was found that notched Izod impact strength of PA6/EVA-g-MA blends increased significantly with MA content in EVA-g-MA. The brittle to tough transition temperature of reactively compatibilised blends was found to be at 23 °C. The impact fractured surface topology reveals extensive deformation in presence of EVA-g-MA whereas; uncompatibilised PA6/EVA blend shows dislodging of EVA domains from the matrix. Tensile strength of the PA6/EVA-g-MA blends increased significantly as compared to PA6/EVA blends. Analysis of the tensile data using predictive theories showed an enhanced interaction of the dispersed phase and the matrix. It is observed from the phase morphological analysis that the average domain size of the PA6/EVA-g-MA blends is found to decrease gradually with increase in MA content of EVA-g-MA. A similar decrease is also found to observe in PA6/EVA/EVA-g-MA blends with increase in EVA-g-MA content, which suggest the coalescence process is slower in presence of EVA-g-MA. An attempt has been made to correlate between impact strength and morphological parameters with regard to the compatibilised system over the uncompatibilised system.     

多交叉混沌选择反向小生境遗传算法

为提高小生境遗传算法的全局以及局部搜索能力,提出一种多交叉混沌选择反向小生境遗传算法。利用分段线性混沌映射函数生成一组混沌数序列,在每次进行交叉操作前,依据序列中对应元素的数值大小选择不同的交叉算子进行操作,通过小生境遗传算法产生较优的子代种群。针对子代种群,应用反向搜索策略获得反向种群,在子代种群和反向种群中进行精英选择得到最终新种群,以进一步加强算法的局部寻优能力。仿真实验结果表明,该算法在最优解及均值方面好于小生境遗传算法,从而证明其可行性和优越性。     

海军航空兵机动转场辅助决策系统设计与实现

针对海军航空兵部队实施机动转场时需要完成的选择转场飞机、确定物资携行量、物资装载和调配运输资源这四个关键决策任务,在充分需求分析的基础上,讨论了模型构建规则和系统功能要求,提出了辅助决策系统的设计方案,并利用面向服务的体系结构和Web Service开发技术,给出了系统实现方法.应用结果表明该系统具有先进的技术体系,稳定可靠的运行结果,为科学生成机动转场预案提供了新途径,从而提高飞行团机动转场决策能力.     

Molecular weight distribution of the graft copolymer comprising mixtures of styrene and acrylamiae on cellulose acetate film by means of gel permeation chromatography

Styrene portion of the radiation-induced graft copolymer comprising styrene and acrylamide was separated by acid hydrolysis and the effects of various grafting parameters (e.g., reaction time, reaction temperature, solvents, monomer composition, etc.) on molecular weight distribution were evaluated by means of gel permeation chromatography. When a single monomer or mixture of two monomers are grafted, the molecular weights is found to increase, but polymer dispersity decreases with the increase of reaction time or reaction temperature except at a higher reaction time due to the continuous enlargment of the growing chain through increased swelling and molecular motion of the trapped radicals. At higher reaction time the degradation of the graft chains lead to lower molecular weight and higher polymer dispersity. Effects of solvents (e.g., methanol, ethanol, and t-butanol) on the molecular weight and molecular weight distribution were discussed on the basis of swelling property and chain transfer constants of the solvents. Styrene-type graft radical being long lived compared to acrylamide type, gave long-chain styrene graft with the increase of styrene content in the reaction mixture. A comparison of the effect of one-and two-component systems on a molecular weight distribution is also discussed.