Transient aspects of inner wall temperatures at different spatial positions in fluidized bed evaporators

In this work, the instantaneous data of inner wall temperatures obtained at given axial positions but for different heated tubes or at various axial positions but at the same heated tube in a tube-bank fluidized bed evaporator with a vapor–liquid–solid external natural circulation flow were analyzed by employing linear and nonlinear time series analysis methods, including correlation dimension and Kolmogorov entropy analyses besides time domain, power spectrum and autocorrelation analyses. It is found that nonlinear characteristics of the wall temperature time series vary with spatial position in the evaporator at given operation conditions, and thus the multi-phase flow boiling behavior. However, the signals obtained at given axial position but different heated tubes in the evaporator exhibit more similar nonlinear evolution behavior, and those measured in the same heated tube but at different axial heights in the evaporator undergo more distinct nonlinear dynamic behavior. Multi-scale phenomena in different spatial positions are also found and discussed. These transient aspects of inner wall temperatures are closely related to the average holdup of solid particles and motion of vapor bubbles in vapor–liquid–solid flow. These results can provide some valuable information on the system modeling and controlling from the point of view of nonlinearity.     

Preparation and adsorption behavior of a cellulose‐based,mixed‐mode adsorbent with a benzylamine ligand for expanded bed applications

A novel mixed‐mode expanded bed adsorbent with anion‐exchange properties was explored with benzylamine as the functional ligand. The cellulose composite matrix, densified with stainless steel powder, was prepared with the method of water‐in‐oil suspension thermal regeneration. High activation levels of the cellulose matrix were obtained with allyl bromide because of the relative inertness of the allyl group under the conditions of the activation reaction. After the formation of the bromohydrin with N‐bromosuccinimide and coupling with benzylamine, the activated matrix was derived to function as a mixed‐mode adsorbent containing both hydrophobic and ionic groups. The protein adsorption capacity was investigated with bovine serum albumin as a model protein. The results indicated that the prepared adsorbent could bind bovine serum albumin with a high adsorption capacity, and it showed salt tolerance. Effective desorption was achieved by a pH adjustment across the isoelectric point of the protein. The interactions between the cell and adsorbent were studied, and the bioadhesion was shielded by the adjustment of the salt concentration above 0.1M. Stable fluidization in the expanded bed was obtained even in a 2% (dry weight) yeast suspension. The direct capture of target proteins from a biomass‐containing feedstock without extra dilution steps could be expected with the mixed‐mode adsorbent prepared in this work, and this would be especially appropriate for expanded bed adsorption applications. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation and Characterization of Carboxymethyl Chitosan and β-Cyclodextrin Microspheres by Spray Drying

Three kinds of carboxymethyl chitosan/β-cyclodextrin microspheres loaded with theophylline were prepared by spray drying intended for pulmonary delivery. Mucociliotoxicity, permeation rate, and drug release characteristics of the product were investigated. The microspheres obtained by spray drying were found to be spherical with smooth or wrinkled surfaces. The mean particle size was between 3.39 and 6.06 µm. The microspheres demonstrated high product yield (43.7-50.2%), high drug loading (13.7-38.1%), and high encapsulation efficiency (86.9-92.8%). FT-IR indicated that there were interactions of theophylline with carboxymethyl chitosan matrix. Further studies on mucociliotoxicity and permeation confirmed that microspheres had better adaptability and high permeation rate. In vitro drug release from the microspheres was not related to the drug/polymer ratios.     

Hartstoffschichten für das Pressen und Prägen von Gläsern bei hohen Temperaturen

Hard and wear resistant coatings for the moulding and embossing of glasses at elevated temperatures Hard and wear resistant coatings of Titanium Aluminium Nitride TiAlN were deposited on various substrates by the application of different reactive deposition processes: RF-magnetron-sputtering, ion beam-sputtering and by the energetic cluster impact (ECI) process. The deposition of the coatings was performed under variation of biasing conditions and of process parameters such as pressures and flow rates of the process gases argon and nitrogen as well as of energies of species hitting the substrate surfaces. The microstructure particularly the growth morphology of several films was investigated by pictures of film cross sections recorded by transmission electron microscopy. Residual intrinsic film stresses were analyzed by measuring deflections of substrates in an interference optical microscope before and after the deposition of the coatings. By heating coated substrates and in-situ observation of deflections at elevated temperatures dependencies of thermally induced stresses on temperatures and variations of intrinsic stresses due to changes within the films could be analyzed and related to microstructure and growth conditions. In the paper specific characteristics of the deposition processes occuring on the scale both of atoms and of clusters which may contain several thousand of atoms are described and related to microstructure, residual stress states and damaging conditions. Different contributions to residual film stresses are analyzed on the base of theoretical considerations taking into account deposition kinetics and thermomecanical properties. The significance of achieved film properties for application, i. e. for the coating of tools for the manufacturing of optical components by moulding and embossing of glasses is discussed.     

γ 射线引发 VAc 乳液聚合以制备白乳胶的动力学及工艺条件研究

研究了ＶＡｃ的辐射乳液聚合动力学，并对其聚合工艺条件作了初步探索。得出ＶＡｃ乳液在进行辐射聚合时，成核期结束较早（转化率在１０％以下），有相当长的恒速期存在。乳胶粒子直径在０．５～３μｍ之间，比一般的乳液聚合乳胶粒子要大。同时从动力学数据还可以看出几种成核机理（胶束成核，水相成核和液滴成核）同时存在，由此对试验条件提出了相应的要求。     

Cdc34 and the F-box protein Met30 are required for degradation of the Cdk-inhibitory kinase Swe1

Ubiquitin-mediated proteolysis controls the abundance of many cell cycle regulatory proteins. Recent work in Saccharomyces cerevisiae suggests that a complex consisting of Cdc53, Skp1, and a third component known as an F-box protein (termed SCF) in combination with Cdc34 specifically targets regulatory proteins for degradation, and that substrate specificity is likely to be mediated by the F-box subunit. A screen for genetic interactions with a cdc34 mutation yielded MET30, which encodes an F-box protein. MET30 is an essential gene required for cell cycle progression and met30 mutations interact genetically with mutations in SCF components. Furthermore, physical interactions between Met30, Cdc53, Cdc34, and Skp1 in vivo provide evidence for an SCFMet30 complex. We demonstrate the involvement of Met30 in the degradation of the Cdk-inhibitory kinase Swe1. Swe1 is stabilized in met30 mutants and GST-Met30 pull-down experiments reveal that Met30 specifically binds Swe1 in vivo. Furthermore, extracts prepared from cdc34 or met30 mutants are defective in polyubiquitination of Swe1. Taken together, these data suggest that SCF-mediated proteolysis may contribute to the regulation of entry into mitosis. Our data, in combination with previously published results, also provide evidence for distinct SCF complexes in vivo and support the idea that their F-box subunits mediate SCF substrate specificity.     

金湖县防汛信息化的现状分析与对策研究

水利信息化作为水利现代化的基础和标志,是防洪减灾、水资源管理、水环境监测和水土保持的重要手段和技术支撑,是提高水利管理工作效率和效能、实现水利服务社会的重要途径和必然要求,是改造传统水利、促进水利改革与发展的重要措施和迫切需要.阐述了目前水利工程现状和非工程措施建设现状,存在的问题及需求分析,并提出相关解决对策.     

Incorporating Actor-Critic in Monte Carlo tree search for symbolic regression

Neural Computing and Applications - Most traditional genetic programming methods that handle symbolic regression are random algorithms without memory and direction. They repeatedly search for the...     

基于互联网实现多种信息传输技术

随着信息技术的迅速发展,使用互联网实现楼宇内电话、电视、电脑、安防和环境监控、计量数据等信息的合路传输,是实现智能家居和数字楼宇的一种主要发展趋势。最终目的,实现对物和过程的智能化感知。文章首先介绍信息合路编码、中央控管电路,然后介绍网络接口电路原理和系统体系构架。重点介绍多种多样的信息传输技术。它对现代楼宇信息化、智能化建设有很好的参考作用。