多孔塑料管材挤出工艺和机头模具

扼要介绍了多孔塑料管材的用途、性能、制造方法、配方、生产工艺和机头模具的设计     

我国烧碱市场分析与展望

回顾了2005年我国烧碱的生产与市场消费情况,分析了2006年国内烧碱市场形势,对“十一五”期间我国烧碱市场总体趋势进行了展望。     

Fabricating Water-Insoluble Polyelectrolyte into Multilayers with Layer-by-layer Self-assembly

Summary A water insoluble azo-containing polyelectrolyte (PEAPB6P-AC) was successfully fabricated into multilayer films based on the layer-by-layer adsorption technique by using N, N-dimethylformamide (DMF) as the assembling media. The multilayer growth and structure were studied with UV-vis spectroscopy, and the multilayer surface were imaged with Atomic Force Microscopy and compared with that fabricated in water. The results show that assembling PEAPB6P-AC in DMF can effectively eliminate the hydrophobic aggregation of the azo units and consequently results in a much smoother multilayer surface than that fabricated in water. This improvement to the layer-by-layer adsorption technique, which can avoid some major difficulties faced when assembling hydrophobic polyelectrolytes in aqueous solutions, seems to be a versatile way to fabricate high quality multilayer films when using the hydrophobic even water-insoluble polyelectrolytes as assembling units.     

GYM系列亿丰磨在非金属矿物超微粉碎中的应用

干法生产超细粉是我国非金属粉体的重要加工工艺之一，传统的粉磨设备难以达到大量生产d97=2—10μm超细粉的要求，且生产效率低。阐述了采用多磨轮、多磨道原理设计的GYM-83型亿丰磨在生产粒径为11μ的碳酸钙干粉时，其累积分布达98％，粒径为2μm的占总质量44．96％，产量达到了1250kg／h，且基建投资少，性价比好。     

智能混合控制器在转炉干法除尘中的应用

转炉干法除尘蒸发冷却器出口烟气温度大多数采用常规串级控制方式,但转炉冶炼前期控制效果并不理想.对转炉冶炼过程及蒸发冷却器出口烟气温度的控制难点进行研究,找出常规串级控制方式的缺点,并设计出一种智能混合控制器.采用智能模糊控制器和常规控制器并联的控制方式,对蒸发冷却器出口烟气温度进行控制,控制效果理想.实际应用表明,同常规串级控制器相比,智能混合控制器具有响应快、被控对象稳定等优点.     

Studies on membrane formation mechanism by the light transmission technique. I

New parameters, light transmission rate and minimum light transmissions, are proposed. These two parameters reflect the characteristics of the membrane‐forming system and the formation process of the membranes by phase inversion. The relationship between the light transmission and the porous structure of the membrane can be explained by the geometrical optics principles. Variation of the two parameters combining Reuvers's phase separation theory provided a convenient analytical method to predict effectively membrane morphologies. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 174–181, 2003     

Fabrication and amplification of Rhodamine B‐doped step‐index polymer optical fiber

A step‐index polymer optical fiber (SI POF) containing Rhodamine B in poly(methyl methacrylate) (PMMA) has been fabricated by a preform technique. Fluorescence of different fiber lengths were observed and discussed. A high gain (23 dB) for a SI POF with 60‐cm length, 400‐μm diameter was obtained. The Rhodamine B content of the doped SI POF is 5 ppm‐wt. The signal wavelength providing the highest gain for a 60 cm SI POF is around 630 nm, and the optimum fiber length is about 60 cm at 10 kW launched pump power. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 681–685, 2004     

干法/半干法高效脱硫吸附剂的制备研究

干法／半干法脱硫因占地小、投资小、费用低，能达到中等程度的脱硫效率而受到关注。脱硫剂影响脱硫效率的重要因素，Ca(OH)2作为一种优良的脱硫吸附剂，早已受到人们的重视。本文以比表面积为参数评价脱硫剂性能的优劣，研究选择制备高效脱硫剂的工艺方法。     

Fenton氧化法处理废水的机理及应用

阐述了Fenton试剂的氧化机理 ,分析了各项因素对氧化效果的影响。介绍了光 -Fenton法、电 -Fenton法及Fenton -混凝法在废水处理中应用情况以及存在的问题 ,并展望了其发展趋势。     

气体控制参数对气体辅助成型产品翘曲的影响

从气体辅助注射成型工艺的角度探讨了气体的延迟时间和第一段压力这两个关键的参数对槽的影响进而对产品翘曲变形的影响，结果表明：虽然通过使用气体辅助注射成型技术能改善产品变形，但并不能完全消除变形；造成产品变形的原因和机理十分复杂，只有进行从设计到工艺的全方位考察才能有效的控制变形，气体手指效应也是造成产品变形的一个重要因素，工艺上可以通过调整延迟时间和气体压力来减小产品的变形量。