如何提高预焙铝电解槽阳极质量

预焙阳极的质量已严重制约铝电解技术的发展，必须予以足够的重视．国外在提高阳极质量方面的有效措施，可以供国内阳极工厂技术改造及科研攻关借鉴．     

PC／PA1010共混物的热行为

利用热失重、微分热失重和显示扫描量热法研究了聚碳酸酯／尼龙１０１０共混物的热行为和解降解过程。结果表明：共混物在６００℃以下分两步降解，降解温度随尼龙１０１０用量增加有下降趋势；共混物的熔点随尼龙１０１０用量增加而升高。     

氯化聚丙烯改性胶粘剂的合成及粘附性能研究

以甲苯为溶剂，过氧化二苯甲酰(BP0)为引发剂，通过自由基聚合，采用甲基丙烯酸羟乙酯(HEMA)和苯乙烯(St)接枝改性氯化聚丙烯(CPP)。研究了不同苯乙烯用量、不同反应温度、不同反应时间、不同引发剂用量对改性氯化聚丙烯胶粘剂粘附性能的影响，得出较佳的工艺条件为反应温度90℃，反应时问2h，原料配比m(CPP)：m(HEMA)：m(St)：m(BPO)=50：0．5：0．6：0．15。     

Poly(3‐chlorothiophene) films prepared by the direct electrochemical oxidation of 3‐chlorothiophene in mixed electrolytes of boron trifluoride diethyl etherate and sulfuric acid

3‐Chlorothiophene (CT) was electrochemically polymerized in mixed electrolytes of a boron trifluoride diethyl etherate solution containing 0–20% (by volume) sulfuric acid. The oxidation potentials of the monomer in these media were measured to be only 1.06–1.31 V (vs Ag/AgCl). These values were much lower than that of CT in acetonitrile and 0.1 mol/L (Bu)₄NBF₄ (1.92 V vs Ag/AgCl). Poly(3‐chlorothiophene) (PCT) films with conductivities of 0.1–2 S cm^?1 were obtained. The structure, morphology, and electrochemical behavior of the PCT films also were investigated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 502–509, 2003     

Strain-induced crystallization,Part IV: Induction time analysis

The empirical equation, 1/t_i = Ae^Ei/RT, which expresses the exponential dependence of the reciprocal of crystallization induction time, t_i, has been analyzed and shown to be equivalent to the nucleation rate equations derived earlier in Part III (1). Consequently we have used the t_i measurements obtained earlier by Krueger and Yeh to calculate not only the nucleation rate enhancements but also the melting point elevations, the relative crystal thickness changes and molecular coil extension ratios of shear-crystallization polyethylene. It is shown that polyethylene when crystallized between 129 and 131°C at shear rates between 1.56 and 9.70 sec^?1 can have melting point increases of 4.2 to 7.2°C and crystal thickness decreases of 20 to 25 percent, when compared to those crystallized at 130°C in the quiescent state. The predicted “coil” extension in the melt just prior to shear-induced crystallization ranges between 21 and 36 percent. The results of these analyses as well as those on nucleation rates of polyethylene oxide are discussed in detail.     

GYM系列亿丰磨在非金属矿物超微粉碎中的应用

干法生产超细粉是我国非金属粉体的重要加工工艺之一，传统的粉磨设备难以达到大量生产d97=2—10μm超细粉的要求，且生产效率低。阐述了采用多磨轮、多磨道原理设计的GYM-83型亿丰磨在生产粒径为11μ的碳酸钙干粉时，其累积分布达98％，粒径为2μm的占总质量44．96％，产量达到了1250kg／h，且基建投资少，性价比好。     

四种杀菌剂对枸杞黑果病的防治效果

枸杞黑果病是枸杞产区的主要病害．发病后造成黑花、黑蕾和黑果，使枸杞产量降低，品质变劣。为探明四种杀菌剂对枸杞黑果病的防治效果及最佳剂量，2003年对下述四种杀菌剂进行了田间药效对比试验，调查防效结果如下：20％三苯基醋酸锡WP450～281g／hm^2(以有效成分计，下同)，20％氟硅唑EC21．08g／hm^21．5％噻霉酮EW16、88～21．08g／hm^2、40％氟硅唑EC450g／hm^2和70％甲基托布津WP787．5g/hm^2对枸杞黑果病防效均在88．25％以上。经LSD检验各处理间防效无显著差异。     

智能混合控制器在转炉干法除尘中的应用

转炉干法除尘蒸发冷却器出口烟气温度大多数采用常规串级控制方式,但转炉冶炼前期控制效果并不理想.对转炉冶炼过程及蒸发冷却器出口烟气温度的控制难点进行研究,找出常规串级控制方式的缺点,并设计出一种智能混合控制器.采用智能模糊控制器和常规控制器并联的控制方式,对蒸发冷却器出口烟气温度进行控制,控制效果理想.实际应用表明,同常规串级控制器相比,智能混合控制器具有响应快、被控对象稳定等优点.     

硫醇自组装膜的电化学研究进展

综述了在金电极上硫醇自组装膜的电化学表征方法，性质和应用，介绍了自组装膜上的电子传递机理，并进行了简要的展望。