Zr+Er及Zr+Y对Al-Mg-Si-Cu-Mn-Cr合金组织和拉伸力学性能的影响

采用光学显微镜(OM)、电子显微镜(SEM)、能谱分析仪(EDS)、透射电子显微镜(TEM)和拉伸强度试验研究了0.3%Zr+0.2%Er和0.3%Zr+0.2%Y(质量分数)两种元素组合对Al-0.6Mg-0.9Si-0.5Cu-0.5Mn-0.2Cr合金热处理前后微观组织和力学性能的影响。研究结果表明,两种元素组合的加入均能细化铸态晶粒,其中Zr+Y改性合金的晶粒细化更明显,且两种改性合金铸态的强度和塑性均较基体合金提高。在热处理过程中,两种元素组合会影响合金中弥散相的析出,降低合金的弥散强化效果。最终,Zr+Er改性合金的强度较基体合金提高,而Zr+Y改性合金的强度则较基体降低,两种合金的塑性均较基体降低。     

单晶PZT-CFO铁电-铁磁复合纳米纤维的制备与磁学性能研究

以不同锆掺杂量的前钙钛矿结构钛酸铅和铁酸钴为原料,采用原位固相烧结法合成了一系列单晶锆钛酸铅-铁酸钴(PZT-CFO)复合纳米纤维。X射线衍射、扫描电子显微镜和能谱分析结果表明,一维单晶PZT-CFO复合纳米纤维同时存在钙钛矿相的锆钛酸铅和尖晶石相的铁酸钴。高分辨透射电子显微镜研究证实锆钛酸铅和铁酸钴之间存在外延生长关系。采用振动样品磁强计对PZT-CFO复合纳米纤维的磁学性能进行测试,发现该复合纳米纤维具有明显的铁磁性能,其剩余磁化强度和矫顽力随着锆掺杂量的增加而增加。     

Ag纳米颗粒等离激元光散射增强对Si刻蚀形貌的影响机制

通过实验与有限元(FDTD)模拟系统研究了不同粒径尺寸的Ag纳米颗粒在P(100)Si表面刻蚀过程中等离激元光散射增强对刻蚀孔形貌的影响。SEM结果表明,刻蚀孔由与粒径尺寸接近的垂直孔演化为一种上大下小的火炬状形貌特征孔,该孔的直径与纳米颗粒尺寸散射半径相仿。模拟不同粒径的Ag纳米颗粒进入刻蚀孔后的光散射特征,证实了Ag纳米颗粒等离激元散射对刻蚀孔初期形成的重要作用。分析表明,基于光照条件下电子-空穴的激发特征,刻蚀孔的形貌主要依赖Ag纳米颗粒等离激元散射的光增强,即通过改变入射光频率以及Ag纳米颗粒粒径可以有效地调控Si表面形貌特征。Ag纳米颗粒等离激元光散射增强技术在Si基太阳能电池、发光二极管(LED)器件等领域有潜在应用前景。     

ITER极向场线圈销轴表面硬化工艺研发

ITER极向场线圈(PF)磁体支撑销轴承载极向场线圈和部分真空室的质量,因使用环境非常恶劣,所以对其表面硬度及耐磨性能有很高的需求。按照ITER极向场线圈销轴的设计要求,研发了两种表面硬化处理方式,包括无界面N离子注入361LN强化处理以及采用在不锈钢表面堆焊一层马氏体不锈钢ER414L的方式分别不同程度地增加基底材料的表面硬度以及耐磨性能,可以满足小尺寸及超大型部件的表面硬化设计需求。     

基于GPS与惯性组件的复合测姿系统设计

针对微小型载体空间有限而无法安装大型测姿系统,提出了一种低成本的微型复合测姿方案.复合测姿系统由单天线GPS和MEMS惯性组件构成.利用扩展卡尔曼滤波将单天线GPS和MEMS惯性组件信息融合,提高了姿态估计精度.室外车载实验结果表明,利用该复合测姿系统解算的滚角和俯仰角误差可控制在1°以内,航向角误差可控制在2°以内.     

隧道掘进聚能水压光面爆破新技术与应用

为了解决成兰铁路金瓶岩隧道出现围岩扰动和隧道超挖的问题,采用聚能水压光面爆破技术。在实施该技术的过程中,根据聚能水压光面爆破技术原理、聚能装置装药和装填技术的要点,严格执行每一操作步骤,并结合隧道掘进工程实践进行现场写实记录。然后将写实记录结果与常规光面爆破进行技术、经济效果对比分析,效果明显。即新技术成型效果好,造孔率减少了50%,又节约了爆破材料,降低施工成本,提高了劳动生产率。该项技术有助于实现隧道开挖"精细化"和"绿色施工",对类似工程具有一定的参考价值。     

快速检验技术在自制炸药爆炸事故现场勘查中的应用

针对自制炸药爆炸事故造成人员伤亡、财产损失巨大,社会影响恶劣的情况,采用红外光谱法(IR)和拉曼光谱法(Raman)等快速检验技术对爆炸现场的遗留物、残留物和抛散物等进行检验、初步定性和来源推断。通过一起自制炸药爆炸事故的现场勘查和物证临场快速检验,实现了对自制炸药主要组分的快速推断和爆炸现场重建,并对爆炸事故原因进行了分析判定,可为同类爆炸事故现场快速勘验和原因分析提供借鉴,对提升爆炸事故现场勘查效率,实现爆炸事故原因快速认定具有重要的应用价值,并对查清犯罪事实,打击犯罪和维护社会稳定有着重要的作用。     

Application of Elastic Stiffness Damper with Disc Spring to Numerical Control Punch

The paper aims to analyze the impacts of punch damper stiffness on equipment base and vibration,and introduce the development and application of a disc spring damper featured hard-soft-hard variable stiffness. A damper has four damping columns with C-type disc springs whose laminates plate number gradually increases set by set. Compared with its counterparts,this kind of dampers has the advantages of high energy absorption and vibration damping effect,which not only can effectively reduce the vibration of the foundation of punch press,but also prevents the vibration range from increasing. Also,this kind of dampers is of low cost and convenient to use.     

Study on Carbon Emission Driving Factors and Low-carbon Policy of Transportation Industry in Henan Province

The transportation industry is the basic industry of national economic development. At the same time,it is the only industry in China that has continuously increased CO_2 emissions,and the high energy consumption problems have not been solved. Henan province,as a major energy consumption province,it is urgent to improve the supply quality of transportation industry. The paper uses the IPCC calculation method for carbon emission to calculate the CO_2 emissions of transportation industry in Henan province from 2004 to 2014. Then,this paper uses the LMDI method to decompose the CO_2 emission in the transportation industry and give the proposal to reduce the CO_2 emission according to the CO_2 emission drivers.     

Patterning of Discotic Liquid Crystals with Tunable Molecular Orientation for Electronic Applications

The large‐area formation of functional micropatterns with liquid crystals is of great significance for diversified applications in interdisciplinary fields. Meanwhile, the control of molecular alignment in the patterns is fundamental and prerequisite for the adequate exploitation of their photoelectric properties. However, it would be extremely complicated and challenging for discotic liquid crystals (DLCs) to achieve the goal, because they are insensitive to external fields and surface chemistry. Herein, a simple method of patterning and aligning DLCs on flat substrates is disclosed through precise control of the formation and dewetting of the capillary liquid bridges, within which the DLC molecules are confined. Large‐area uniform alignment occurs spontaneously due to directional shearing force when the solvent is slowly evaporated and programmable patterns could be directly generated on desired substrates. Moreover, the in‐plane column direction of DLCs is tunable by slightly tailoring their chemical structures which changes their self‐assembly behaviors in liquid bridges. The patterned DLCs show molecular orientation–dependent charge transport properties and are promising for templating self‐assembly of other materials. The study provides a facile method for manipulation of the macroscopic patterns and microscopic molecular orientation which opens up new opportunities for electronic applications of DLCs.