掺Li_2O–B_2O_3–SiO_2玻璃低温烧结MgTiO_3–CaTiO_3陶瓷及其微波介电性能

研究了Li_2O–B_2O_3–SiO_2玻璃(LBS)对MgTiO_3–CaTiO_3(MCT)介质陶瓷烧结特性、相组成和介电性能的影响,分析了MCT陶瓷与银电极的共烧行为。结果表明通过液相烧结,LBS能有效降低MCT烧结温度至890℃。X射线衍射结果显示有Li_2MgTi_3O_8、硼钛镁石以及Li_2TiSiO_5等新相生成。随着LBS添加量的增大,陶瓷致密化温度和饱和体积密度降低,介电常数εr、品质因数与谐振频率乘积Q×f也呈现下降趋势,频率温度系数τf向负值方向移动。添加质量分数为20%的LBS的0.97MgTiO3–0.03CaTiO3陶瓷在890℃烧结4h,获得最佳性能εr=16.4,Q×f=11640GHz,τf=–1.5×10–6/℃。陶瓷与银电极共烧界面结合状况良好,无明显扩散。该材料可用于制造片式多层微波器件。     

六面顶金刚石压机液压系统压力及超高压优化控制

针对六面顶人造金刚石压机的复杂生产流程要求,设计开发了六面顶人造金刚石压机液压系统的计算机控制装置.其中液压系统压力控制部分采用外置模拟式PI调节器,可根据生产工序的要求自动优化控制器设定值;超高压控制部分采用智能预测与纯比例控制相结合的控制策略,明显提高了人造金刚石压机的液压控制精度.该控制装置已投入实际运行,在改善产品质量品级方面取得了显著的经济效益.     

海绵钛的生产及应用

介绍了海绵钛的主要特点、用途、质量及生产方法。     

热处理对硬质合金结构参数的改变

硬质合金的质量在很大程度上受其显微组织的影响,使用适宜的热处理工艺可以使圆滑状棱角的晶粒数量增加,从而改变WC邻接度,使硬质合金的塑性变形能力得到提高,改善了合金的性能.研究了回火工艺对热处理产品的影响,系统地分析了回火时过饱和固溶体的析出物,从而制定合适的回火工艺.同时,探讨了热处理对硬质合金疲劳极限的影响,并通过大批量合金的冲击韧性验证以及用户使用实验证明,热处理合金具有较高的冲击韧性,在循环冲击条件下,热处理合金有较高的使用性能.     

中国狂犬病毒疫苗株CTN-1-V三个代次的GP基因序列分析

目的分析三个代次CTN-1-V病毒株糖蛋白(GP)基因部分序列,并与代表性街毒株进行比较。方法利用RTPCR反应,从感染了CTN-1-V病毒的小鼠脑内获得GPcDNA的部分片段,并进行序列测定。结果三个代次的CTN-1-V病毒株GPcDNA序列的690个核苷酸与代表性狂犬病毒GP核苷酸相应序列同源性为83.2%～96.8%,氨基酸序列同源性为90.0%～97.4%。CTN1V株三代之间的核苷酸序列几乎相同。结论CTN1V株在传代过程中GP基因结构基本稳定,与中国流行的代表性街毒株的同源性高于aG株和PV株。     

Morphology,thermal, and mechanical properties of polyamide 66/clay nanocomposites with epoxy‐modified organoclay

A new kind of organophilic clay, cotreated by methyl tallow bis‐2‐hydroxyethyl quaternary ammonium and epoxy resin into sodium montmorillonite (to form a strong interaction with polyamide 66 matrix), was prepared and used in preparing PA66/clay nanocomposites (PA66CN) via melt‐compounding method. Three different types of organic clays, CL30B–E00, CL30B–E12, and CL30B–E23, were used to study the effect of epoxy resin in PA66CN. The morphological, mechanical, and thermal properties have been studied using X‐ray diffraction, transmission electron microscopy (TEM), mechanical, and thermal analysis, respectively. TEM analysis of the nanocomposites shows that most of the silicate layers were exfoliated to individual layers and to some thin stacks containing a few layers. PA66CX–E00 and PA66CX–E12 had nearly exfoliated structures in agreement with the SAXS results, while PA66CX–E23 shows a coexistence of intercalated and exfoliated structures. The storage modulus of PA66 nanocomposites was higher than that of the neat PA66 in the whole range of tested temperature. On the other hand, the magnitude of the loss tangent peak in α‐ or β‐transition region decreased gradually with the increase in the clay loading. Multiple melting behavior in PA66 was also observed. Thermal stability more or less decreased with an increasing inorganic content. Young's modulus and tensile strength were enhanced by introducing organoclay. Among the three types of nanocomposites prepared, PA66CX–E12 showed the highest improvement in properties, while PA66CX–E23 showed properties inferior to that of PA66CX–E00 without epoxy resin. In conclusion, an optimum amount of epoxy resin is required to form the strong interaction with the amide group of PA66. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1711–1722, 2006     

基于能量优化的LEACH路由协议改进

针对LEACH路由算法中簇头选举随机性和簇头与基站直接通信导致能量消耗过快且不平衡的特点,提出新的改进算法,以达到降低能耗目的。在改进算法中,簇头剩余能量高于网络平均能量。根据簇头节点与基站的相对位置划分不同区域,簇头节点发送数据采用多跳方式,避免簇头节点能量消耗过快,达到平衡网络能量消耗的目的。仿真表明,通过改进簇头选举条件和采用多跳路由的方式,即使在数据通信量增加的情况下,依然能够延长网络通信时间。     

A method for transformation of engineering bill of materials to maintenance bill of materials

In order to solve the transformation problem of Bill of Materials (BOM) from engineering BOM to maintenance BOM for Maintenance, Repair and Overhaul (MRO) systems, a formal transformation model of BOM view is proposed. In this model, the intermediate component, inherited component, virtual component are defined in the specific maintenance management domain, and the transformation process from engineering BOM to maintenance BOM is discussed through feature recognition methods and rules. The proposed transformation model has been developed and deployed in an MRO system for a steel manufacturing enterprise.     

3-甲基-4-硝基亚胺基全氢化-1,3,5-(口恶)二嗪的合成

3-甲基-4-硝基亚胺基全氢化-1,3,5-二嗪是合成第二代烟碱类杀虫剂噻虫嗪的重要中间体。介绍并评价了文献中所报道的合成3-甲基-4-硝基亚胺基全氢化-1,3,5-二嗪的方法。以硝基胍为起始原料成功的合成了3-甲基-4-硝基亚胺基全氢化-1,3,5-二嗪,总收率为68.2%。     

纳米有机蒙脱土改性邻甲酚醛环氧树脂的研究

利用插层复合技术制备了邻甲酚醛环氧树脂／蒙脱土纳米复合材料，对固化产物利用X射线衍射(XRD)分析有机蒙脱土的层间距变化。通过对复合材料的力学性能测试表明，少量有机化蒙脱土的加入可以较大地提高材料的拉伸强度和冲击强度，起到了同时增韧增强的作用。并且环氧树脂／蒙脱土复合材料的热分解温度和热变形温度也有明显提高。