Dynamic mechanical behavior and nanostructure morphology of hyperbranched‐modified polypropylene blends

Polypropylene (PP) was modified utilizing two types of polyesteramide‐based hyperbranched polymers (amphiphilic PS and hydrophilic PH). A maleicanhydride‐modified PP (PM) was used as a reactive dispersing agent to enhance the modification by grafting the hyperbranched polymers onto the PP chains. Pure PP, two different non‐reactively modified samples, i.e. excluding PM, and two different reactively modified samples, i.e. including PM, were studied. Investigating the morphology of the samples was performed by scanning electron microscopy. To follow the effect of the modification on the dynamic mechanical properties, dynamic mechanical analysis experiments both in the melt (rheometric mechanical spectrometry) and in solid state (dynamic mechanical thermal analysis) were carried out. In the next step, the nanocrystalline structure of the samples was studied by small angle X‐ray scattering (SAXS) in two different modes, i.e. static and recrystallization. Hundreds of SAXS patterns were analyzed automatically using procedures written in PV‐WAVE image‐processing software. The chord distribution function (CDF) was calculated and the long period (l_p) of the crystal lamellae was extracted from the CDFs. The rheometric mechanical spectrometry results show that both hyperbranched polymers decrease complex viscosity η^* and enhance liquid‐like behavior. This happens more significantly when PM is included. The dynamic mechanical thermal analysis results reveal that T_g decreases when PS and PH are added. In the reactively modified samples this reduction is compensated most probably because of the crosslinked structure formed through the grafting reaction between the hyperbranched polymers and PM. Such structure is confirmed by SAXS data and calculated CDFs in the recrystallization mode. Static SAXS data also show enhancement in the crosshatched morphology of the crystalline lamellae of PP for reactively modified samples compared with non‐reactively modified samples. © 2013 Society of Chemical Industry     

Modification of poly(propylene) by grafted polyester‐amide‐based dendritic nanostructures with the aim of improving its dyeability

Fiber‐graded poly(propylene) was modified by polyester‐amide‐based dendritic nanostructures with the aim of improving its dyeability. Two different dendritic polymers were used and the dendritic nanostructures were formed in situ via reactive blending with maleic anhydride‐modified poly(propylene). Samples were chosen exploiting a 4‐component mixture design. Thermal, morphological, and rheological characterizations showed domains with different size and distribution were formed and primary properties of the dendritics determined the characteristics of the resulted domains. Morphological parameters were quantified by digital analysis of scanning electron microscope images. Thermal and rheological behavior also demonstrated good agreements with the inferred morphology of the formed dendritic domains. The modified samples were then dyed with dispersed dyestuffs. A variety of substantivities were obtained, and some of the modified samples showed a significant enhancement in dyeing properties. A predictive model was developed for K/S ratio, where K and S are absorption and scattering coefficients of the Kubelka‐Munk one constant theory, respectively. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

A modern congestion pricing policy for urban traffic: subsidy plus toll

Railway Engineering Science - Congestion pricing is seen as an effective policy to address traffic congestion. In such policies where money, people and authorities are involved, the success...     

On the Refinement Mechanism of Silicon in Al-Si-Cu-Zn Alloy with Addition of Bismuth

Obtained results of micro and nano studies reveal that bismuth refines the silicon in which the flake silicon changed to lamellar structure with reduction in twin spacing from 160 to 75 nm. Bismuth segregates towards the inter-dendritic regions and decreases the Al-Si contact angle resulting in suppression of the silicon growth causing refinement of the eutectic structure. Increased recalescence temperature and time confirmed that the refinement effect is attributed to the growth stage.     

Polyhydroxybutyrate/chitosan/bioglass nanocomposite as a novel electrospun scaffold: fabrication and characterization

Scaffolds and their features play a central role in tissue engineering; so this study is based on the production of a series of electrospun PHB/Chitosan/nBG nanocomposite scaffolds with 9 wt% polyhydroxybutyrate, 10, 15 and 20 wt% chitosan and 7.5, 10 and 15 wt% nanobioglass (nBG). Electrospinning process was performed with optimal conditions of spinning machine including voltage of 16 kV, syringe-collector spacing of 16 cm, and output rate of 1 µl per hour. The developed phases and the formation of chemical bonds between ceramic and polymer bands were studied through XRD and FTIR analyses. The FE-SEM and TEM analyses showed uniform morphology of nanofibers and dispersion of bioglass nanoparticles in the fiber structure. The presence of 10 wt% bioglass nanoparticles and 15 wt% chitosan increased the tensile strength of fibers to 3.42 MPa, which was about four times greater than strength of control sample (pure PHB). The developed fibers were kept 28 days in SBF solution and 60 days in PBS solution to assess their bioactivity and biodegradability. The results showed that the presence of bioglass nanoparticles leads to a dramatic increase in absorption of calcium and phosphorus ions and weight loss of scaffold. The developed scaffold can be used for bone and teeth tissue engineering applications.     

Sonoelectrochemical synthesis of a nanoscale complex of lead(II) and 2-methyl-8-hydroxyquinoline: spectroscopic, photoluminescence, thermal analysis studies and its application in an OLED

A new lead complex, [Pb(mq)₂], (mq = 2-methyl-8-hydroxyquinoline) was prepared via an electrochemical route from the oxidation of lead metal in the presence of 2-methyl-8-hydroxyquinoline in a fast and facile process. The complex was fully characterized by means of NMR and IR spectra and elemental analysis. The nanostructure of the prepared compound was obtained by sonoelectrochemical process and studied by scanning electron microscopy, atomic force microscopy, X-ray powder diffraction, IR spectroscopy and elemental analysis. Thermal stability of single crystalline and nanosize samples of the prepared compound was studied by thermal gravimetric and differential thermal analysis. The photoluminescence properties of the prepared compounds, as single crystals and as nanorods, have been investigated. The results showed a good correlation between the size and the shape of the complex particles and emission wavelength. The prepared complex was doped in PVK:PBD blend as guest and its application in the fabrication of OLED was studied. The ratio of lead complex was modified and was equal to 8 (w/w %) in PVK:PBD (100:40).     

Effect of metal loading on catalytic activity and selectivity of ZSM-5 zeolite catalyst in conversion of methanol to olefins and aromatics

Effect of ZSM-5 zeolite promotion using potassium, strontium, and cerium metals on conversion of methanol to light olefins and aromatics was investigated. ZSM-5 catalyst was promoted using wet impregnation of metal salts and its activity was tested in methanol to hydrocarbons process under optimum operational condition obtained in our group previously. Zeolite samples were characterized by X-ray powder diffraction, scanning electron microscopy, N₂ adsorption-desorption, acid sites distribution, and strength using temperature programmed desorption of NH₃. Results showed that presence of these metals could significantly affect acid site distribution and therefore influence the catalyst activity and selectivity to olefins and aromatics.     

Effect of various efficient vulcanization cure systems on the compression set of a nitrile rubber filled with different fillers

Effect of various efficient vulcanization (EV) sulfur cure systems on the compression set of a nitrile rubber filled with carbon black and silica/silane fillers was examined. The cure systems had different amounts of thiuram and sulfenamide accelerators and elemental sulfur, whilst the loading of zinc oxide and stearic acid activators was kept constant. The fillers had surface areas from 35 to 175 m²/g. In this study, the lowest compression set was measured for the rubber filled with carbon black with 78 m²/g surface area, which was cured with an EV cure system made of a small amount of elemental sulfur and large amounts of the two accelerators. Interestingly, a small change in the amount of elemental sulfur had a bigger effect on the compression set than did large changes in the loading of the accelerators in the cure system. Among the fillers, carbon black caused less compression set of the rubber vulcanizate than the silica/silane system did. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41512.