Development of a fluidized bed thermogravimetric analyzer

A new fluidized bed thermogravimetric analyzer (FB‐TGA) was developed that introduces two major particularities: the pseudo variation of the weight of the reactor and the special strategy for gas flow rate adjustment according to temperature. A momentum balance was performed on the reactor and the pseudo variation of the reactor weight was evaluated by measuring the pressure drop through the gas distributor and filter. The real weight loss of the reactor was obtained by subtracting the pseudo variation of the weight from the total weight loss measured by the load cell. In addition, a special program for the gas flow rate as a function of temperature was developed and used; so the minimum fluidization regime is maintained throughout all of the experiments. The validation test of the FB‐TGA was carried out on calcium hydroxide decomposition, and the results were compared with those obtained from the conventional TGA. Diffusion control was suppressed by the application of the FB‐TGA, which was confirmed by the x‐ray diffraction analysis on the treated samples. © 2014 American Institute of Chemical Engineers AIChE J, 61: 84–89, 2015     

Optimal Sizing of a DBD Ozone Generator Using Response Surface Modeling

Dielectric barrier discharge (DBD) reactors used as ozone generators are well known today and widely used for water treatment and air disinfection. The purpose of this article is to propose an experimental procedure based on the response surface modeling in order to optimize the geometrical dimensions of the cylindrical shape ozone generator, i.e., the discharge gap and the electrodes length. Because an effective ozone generator is expected to give high ozone concentration with a minimum of power requirements, the applied high voltage was associated with the geometrical parameters to carry out a composite centered faces design. Obtained results indicate that for an efficient ozone generator, length of the electrodes needs to be optimized while the discharge gap should be minimized.     

The Tyrosine Gate of the Bacterial Lectin FimH: A Conformational Analysis by NMR Spectroscopy and X‐ray Crystallography

Urinary tract infections caused by uropathogenic E. coli are among the most prevalent infectious diseases. The mannose‐specific lectin FimH mediates the adhesion of the bacteria to the urothelium, thus enabling host cell invasion and recurrent infections. An attractive alternative to antibiotic treatment is the development of FimH antagonists that mimic the physiological ligand. A large variety of candidate drugs have been developed and characterized by means of in vitro studies and animal models. Here we present the X‐ray co‐crystal structures of FimH with members of four antagonist classes. In three of these cases no structural data had previously been available. We used NMR spectroscopy to characterize FimH–antagonist interactions further by chemical shift perturbation. The analysis allowed a clear determination of the conformation of the tyrosine gate motif that is crucial for the interaction with aglycone moieties and was not obvious from X‐ray structural data alone. Finally, ITC experiments provided insight into the thermodynamics of antagonist binding. In conjunction with the structural information from X‐ray and NMR experiments the results provide a mechanism for the often‐observed enthalpy–entropy compensation of FimH antagonists that plays a role in fine‐tuning of the interaction.     

Microbial Fuel Cell Application for Azoic Dye Decolorization with Simultaneous Bioenergy Production Using Stenotrophomonas sp.

A single‐chamber air‐cathode microbial fuel cell (MFC) was successfully applied for decolorization of the diazoic dye Reactive Black 5 (RB5) with simultaneous production of electricity. An innovative low‐cost medium, the marine water‐glucose‐yeast extract medium (MWGY), was developed which appears as a textile marine effluent in terms of salinity. The anode compartment containing a single bacterial strain of Stenotrophomonas sp. showed almost complete dye decolorization with different RB5 concentrations after seven days of treatment. For the four dye concentrations used, a correlation between dye removal and production of electrical energy was found. The comparison of the decolorization process in the MFC with that in a batch reactor as control experiment highlights the efficiency of the single‐chamber air‐cathode MFC technology which improved the dye removal by the same bacterial strain.     

Influences of Mn doping on the microstructural,semiconducting, and optoelectronic properties of HgO nanostructure films

Mn-doped HgO nanostructured thin films (Hg_1-xMn_xO) have been prepared using electron beam evaporation technique on Corning glass (1022) substrate at room temperature with different concentrations x = 0, 0.015, 0.05, 0.1, 0.15, and 0.2. The microstructural, morphological, semiconducting, and optoelectronic properties of the films have been investigated. The X-ray diffraction spectra suggest a hexagonal wurtzite type structure with lattice parameters decreased with increasing Mn content. It was found that the average particle size of the films decreases with increasing Mn doping which is confirmed by FE-SEM and AFM micrographs. The optical band gap of the investigated Mn-doped HgO nanocrystalline films is determined from the absorption coefficient and found to increase with the increase of Mn concentration which is attributed to the sp-d exchange interaction and/or the quantum confinement effect. The refractive index and extinction coefficient of the Mn-doped HgO films are also reported. The refractive index dispersion n(λ) is analyzed by single-effective-oscillator dispersion model proposed by the Wemple–DiDomenico (WDD). The oscillator parameters were estimated. The obtained dispersion values are suitable for the design of optoelectronic devices.     

Facile modification of polysulfone hollow-fiber membranes via the incorporation of well-dispersed iron oxide nanoparticles for protein purification

Protein existence in wastewater is an important issue in wastewater management because proteins are generally present as contaminants and foulants. Hence, in this study, we focused on designing a polysulfone (PSf) hollow-fiber membrane embedded with hydrophilic iron oxide nanoparticles (IONPs) for protein purification by means of ultrafiltration. Before membrane fabrication, the dispersion stability of the IONPs was enhanced by the addition of a stabilizer, namely, citric acid (CA). Next, PSf–IONP–CA nanocomposite hollow-fiber membranes were prepared via a dry–wet spinning process and then characterized in terms of their hydrophilicity and morphology. Ultrafiltration and adsorption experiments were then conducted with bovine serum albumin as a model protein. The results that an IONP/CA weight ratio of 1:20 contributed to the most stable IONP dispersion. It was also revealed that the membrane incorporated with IONP–CA at a weight ratio of 1:20 exhibited the highest pure water permeability (58.6 L m⁻² h⁻¹ bar⁻¹) and protein rejection (98.5%) while maintaining a low protein adsorption (3.3 μg/cm²). The addition of well-dispersed IONPs enhanced the separation features of the PSf hollow-fiber membrane for protein purification. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47502.     

Simulation and Empirical Studies of Solvent Evaporation Rates in Vacuum Evaporation Crystallization

Simulation results for continuous vacuum evaporation crystallization obtained by Aspen Plus and experimental results for semi‐batch vacuum evaporation crystallization are presented. In the crystallization experiments, the fixed heat duty was used to compare the water evaporation rates and crystal properties obtained at different pressures. The solution selected was aqueous glycine. It has the ability to form a number of different crystalline polymorphs, which allows it to exhibit a variety of different physical properties while maintaining its chemical properties. X‐ray diffraction results demonstrated that mainly the γ‐crystal form is produced under the conditions applied in vacuum evaporation crystallization.     

Effects of Fluids on the Simulated Clinical-Dental Machining of a Glass Ceramic

Effects of fluids on material removal rate, chipping damage, and surface roughness in the simulated clinical-dental machining of a dental-type glass ceramic were investigated. Significant differences in removal rate were obtained among the fluids investigated, but only a 4 wt% boric acid solution gave a higher removal rate than conventionally used water. Chipping damage was substantially lower for the boric acid and an oil-emulsion coolant compared with other fluids tested. Surface roughness was independent of the fluids used. The results indicate that improvement can be achieved in both material removal rate and machining damage by the appropriate selection of coolant chemistry.     

A novel classification approach based on Extreme Learning Machine and Wavelet Neural Networks

Multimedia Tools and Applications - In this paper, we present a novel classification approach based on Extreme Learning Machine (ELM) and Wavelet Neural Networks. We introduce two novel...