Axial Compression of Footings in Cohesionless Soils. II: Bearing Capacity

An extensive database of full-scale field load tests was used to examine the bearing capacity for footings in cohesionless soils. Each load test curve was evaluated consistently to determine the interpreted failure load (i.e., bearing capacity) using the L1-L2 method. This test value then was compared with the theoretical bearing capacity, computed primarily using the basic Vesi? model. The comparisons show that, for footing widths B>1?m, the field results agree very well with the Vesi? predictions. However, for B<1?m, the results indicated a relationship between B and the predicted-to-measured bearing capacity ratio. Accordingly, a simple modification was made to the bearing capacity equation, and the resulting predictions are very good.     

Thermal comfort and use of thermostats in Finnish homes and offices

Thermal comfort and use of thermostats in homes and office rooms were examined by a quantitative interview survey with a nationally representative sample in Finland. The total number of respondents was 3094. The results show that thermal comfort levels are lower in offices than in homes. People feel cold and hot more often in offices than in homes during both the winter and summer seasons. The perceived control over room temperature is remarkably low in offices. Higher thermal comfort levels and perceived control in homes are supported by greater adaptive opportunities. In offices people have fewer opportunities to control the thermal environment, people deal worse with thermostats, and people have lower opportunities to adapt to different thermal environments.     

Biochemical characterization of horA-independent hop resistance mechanism in Lactobacillus brevis

We isolated a strain from hop-resistant Lactobacillus hrevis ABBC45, which had lost a plasmid (pRH45) harboring a putative hop resistance gene, horA. The hop resistance level of this horA-deficient strain, named ABBC45(C), was initially low but gradually induced by repeated growth in media containing progressively increasing levels of hop compounds. Although the hop resistance level was substantially lower than that of the hop-adapted wild type strain, hop-adapted ABBC45(C) (ABBC45(CR)) was still capable of growing in beer, suggesting ABBC45 possesses at least two hop resistance mechanisms. Hop resistance acquired by ABBC45(CR) gradually diminished to the pre-adapted level, when the strain was grown repeatedly in the absence of hop compounds. ABBC45(CR) was found to be cross-resistant to several structurally unrelated drugs, including ethidium bromide, daunomycin and nisin. In addition, ABBC45(CR) was shown to extrude ethidium in an energy-dependent manner, while ABBC45(C) did not show such activity. This indicates that the efflux pump was induced by adaptation to hop compounds. The efflux activity of ethidium was reduced by the addition of hop compounds, suggesting hop compounds are also the substrate of the efflux pump. It was also shown that the efflux activity was completely dissipated with the abolition of proton motive force (PMF). These results, taken together, suggest the hop resistance mechanism of ABBC45(C) is mediated by PMF-dependent multidrug efflux pump.     

Catalytic combustion of carbon tetrachloride

The catalytic combustion of carbon tetrachloride (CCl4) by metal oxide catalysts coated on the monolith support was investigated. The prepared catalysts were tested at temperatures between 300 and 800 degrees C and at varying gas hourly space velocity (GHSV) values with an excess air ratio of 3100%. The catalyst, whose composition was 18% Cr2O3, 2% Ce2O3 and 80% gamma-Al2O3, was found to almost completely oxidize CCl4. The operating conditions proposed are 5702 h(-1) for GHSV, 3100% excess air and a temperature slightly higher than 800 degrees C. The reaction rate expression was found to be independent of oxygen partial pressure but strongly dependent on CCl4 partial pressure.     

Self-assembled polymeric solid films with temperature-induced large and reversible photonic-bandgap switching

In aqueous solutions the response of polymers and biological matter to external conditions, such as temperature and pH, is typically based on the hydrophobic/hydrophilic balance and its effects on the polymer conformation. In the solid state, related concepts using competing interactions could allow novel functions. In this work we demonstrate that polymeric self-assembly, reversibility of hydrogen bonding, and polymer-additive phase behaviour allow temperature response in the solid state with large and reversible switching of an optical bandgap. A complex of polystyrene-block-poly(4-vinylpyridinium methanesulphonate) and 3-n-pentadecylphenol leads to the supramolecular comb-shaped architecture with a particularly long lamellar period. The sample is green at room temperature, as an incomplete photonic bandgap due to a dielectric reflector is formed. On heating, hydrogen bonds are broken and 3-n-pentadecylphenol additionally becomes soluble in polystyrene, leading to a sharp and reversible transition at approximately 125 degrees C to uncoloured material due to collapse of the long period. This encourages further developments, for example, for functional coatings or sensors in the solid state.     

Microchip atmospheric pressure chemical ionization source for mass spectrometry

A novel microchip heated nebulizer for atmospheric pressure chemical ionization mass spectrometry is presented. Anisotropic wet etching is used to fabricate the flow channels, inlet, and nozzle on a silicon wafer. An integrated heater of aluminum is sputtered on a glass wafer. The two wafers are jointed by anodic bonding, creating a two-dimensional version of an APCI source with a sample channel in the middle and gas channels symmetrically on both sides. The ionization is initiated with an external corona-discharge needle positioned 2 mm in front of the microchip heated nebulizer. The microchip APCI source provides flow rates down to 50 nL/min, stable long-term analysis with chip lifetime of weeks, good quantitative repeatability (RSD < 10%) and linearity (r(2) > 0.995) with linear dynamic rage of at least 4 orders of magnitude, and cost-efficient manufacturing. The limit of detection (LOD) for acridine measured with microchip APCI at flow rate of 6.2 muL/min was 5 nM, corresponding to a mass flow of 0.52 fmol/s. The LOD with commercial macro-APCI at a flow rate of 1 mL/min for acridine was the same, 5 nM, corresponding to a significantly worse mass flow sensitivity (83 fmol/s) than measured with microchip APCI. The advantages of microchip APCI makes it a very attractive new microfluidic detector.     

Time-out in user interface: the case of mobile text input

In many user interfaces with restricted input capabilities, a time-out is used to automatically change the user interface (UI) from one mode to another. In this paper, we study the learning of time-outs and the effect of feedback on it in the case of mobile phone text entry. The effects of three different feedback schemes (auditory/visual/no feedback) on the learning of two different time-out lengths were compared. We measured the response time (RT) from the time-out occurrence to the time of the users action. Error rates and the development of the RTs in different schemes were used as measures of learning. We also studied if the users learned to estimate the time-out lengths, or if they just reacted to the available feedback. There were three main findings. Without feedback, RTs had a great variation. Auditory feedback enabled faster RTs than visual feedback. Finally, we found evidence of short-term learning, but not much of a lasting effect. The possible application of adapting time-out length to user RT is discussed.     

Intercalibration of SUMER and CDS on SOHO. III. SUMER and CDS-GIS. Solar and Heliospheric Observatory

Simultaneous observation of the same solar sources with different instruments is one way to test prelaunch radiometric calibrations and to detect changes in responsivity with time of extreme-ultraviolet instruments in space. Here we present the results of intercalibration of the SUMER (Solar Ultraviolet Measurements of Emitted Radiation) spectrometer (detectors A and B) and the GIS (Grazing Incidence Spectrometer), one of two spectrometers that compose the CDS (Coronal Diagnostic Spectrometer) on the Solar and Heliospheric Observatory (SOHO). The two instruments observed simultaneously radiances of emission lines at or near the center of the solar disk. The emission line chosen for intercomparison was Ne VIII at 770 A. However, such an intercomparison of the SUMER and CDS-GIS measurements means comparing two data sets with large differences in resolution and field of view. The latter difference, especially, introduces differences in the measured intensities caused by the solar variability that is relatively strong in the 770-A line. Using a statistical approach to overcome this problem, we found that the ratio of the GIS to the SUMER average radiances amounted to 2.6 +/- 0.9 before the SOHO's loss of attitude and to 2.1 +/- 0.7 afterward. These findings confirm earlier estimates of the GIS's responsivity being too low, and an update of the GIS calibration is recommended. Despite the large differences in resolution and field of view of the two instruments, the shapes of their normalized and rescaled histograms of the radiances agree well and therefore represent characteristic features of the Ne VIII line.