Comprehensive ESD protection for RF inputs

We demonstrate that narrow-band tuned circuits may be used for ESD protection of RF inputs, and a figure of merit for optimization of these circuits is presented. The performance of the ESD-protected RF circuit is dependent on the quality factor of the ESD device, and various protection devices are evaluated in this work. Record-breaking human body model (HBM) protection levels, exceeding 5 kV, have been achieved without significantly degrading the RF performance at 5 GHz. Broadband circuit protection is also addressed.     

A comparison analysis of prefiltering methods in space-time trellis-based reduced-state turbo-detection

In this paper, we investigate two different prefiltering strategies, i.e., multiple input multiple output (MIMO) channel shortening and MIMO whitened matched filtering, to decode iteratively a space time bit interleaved coded modulation transmitted over MIMO block fading intersymbol interference channels using a trellis-based post-detector. Indeed, resorting to such front-ends allows significant complexity gain when compared to the optimal maximum a posteriori-based turbo-receiver. While those two approaches have been exhaustively visited in the past, their fair comparison in terms of trade-off between complexity and performance has – to our knowledge – never been tackled before. This paper aims at giving some valuable insights about the respective benefits of these two prefiltering methods with respect to the channel characteristics and overall receiver complexity.     

Transient electromagnetic field of a vertical magnetic dipole on atwo-layer conducting Earth

The transient field-frequency domain of magnetic dipole in a two-layered conducting Earth has been studied. It is obtained as a summation of waveguide modes plus contributions from branch cuts in the complex-plane of the longitudinal wave number. Results can be used to evaluate numerical solutions of more complicated modeling algorithms     

The role of human factors in flexibility management: A survey

Flexibility can be defined as the ability to respond effectively to the ever‐changing and increasing needs of the customer. For this demand to be satisfied, flexibility should be built into the total chain of acquisition, processing, and distribution stages. As a result, there is an increasing interest in flexibility and flexibility enabling mechanisms/parameters to achieve the best strategy for obtaining the right and desired output. Although quite a number of flexibility definitions and mechanisms can be found in the literature, flexibility remains poorly understood and utilized in practice. That is due to the lack of standardization in the terminology about the flexibility definitions and mechanisms. This article presents the finding of an extensive literature survey to determine the Intra flexibility mechanisms/parameters. These mechanisms/parameters are then classified, according to their contribution to the supply chain stages and their interaction with Inter Flexibility mechanisms (e.g., Organizational structure flexibility, Technology flexibility, Information system flexibility, and Human resource flexibility). In addition, the crucial role of human factors and its relationship with flexibility mechanisms are investigated, and related flexibility mechanisms are identified. © 2002 John Wiley & Sons, Inc.     

Determination of flavan-3-ols and trans-resveratrol in grapes and wine using HPLC with fluorescence detection

Concentrations of trans-resveratrol, catechin and epicatechin were analyzed in musts and wines produced from seven red and four white grape cultivars from various wine growing regions of Turkey. Phenolics were quantified using an HPLC method optimized for the separation of wine phenolics. Wine samples contained higher phenolics levels than the corresponding musts. With the exception of Semillion, white wines and musts contained lower concentrations of phenolics than red wines and musts. However, the white cultivar Semillion had the highest concentrations of catechin and epicatechin among all wine and must samples. Semillion wine catechin and epicatechin were 13.7 and 11.8 mg/L, respectively. The highest level of trans-resveratrol among the white cultivars was found in Narince wine (1.93 mg/L). Within the red wine and must cultivars, Bo?azkere, Öküzgozü, and Cabernet contained the highest concentrations of flavan-3-ols and trans-resveratrol. Catechin was the major phenolic in all wines and most musts. Epicatechin was the major phenolic in 6 of the 11 must samples, but none of the wine samples. trans-Resveratrol was generally found in lowest concentrations in both wines and musts.     

Temperature modeling and measurement of an electrokinetic separation chip

This work presents experimental [infrared (IR) thermography] and computational (finite element model) results of temperature distributions of an electrokinetic separation chip. Thermal characteristics of both the electrolyte solution and the polymer chip (SU-8) are taken into account in modeling temperature distributions during electrokinetic flow. Multiphysics and multiscale simulation couples electrostatics, heat transfer, and fluid dynamics. The accompanying IR thermography is a non-contact method, which can measure fractional temperature differences with sub-second time resolution. Any structures or temperature marker molecules interfering with the experiment are not needed. Nominal spot size in the IR measurements is 30 μm with a field of view of several millimeters enabling both local and chip-scale temperature monitoring simultaneously. As a result, we present a computer model for electrokinetic chips, which enables simulation of fractional temperature changes during electrophoresis under real operating conditions. The accuracy of the model is within ±1°C when the deviation in electrochemical processes is taken into account. The simulation results also suggest that the temperature on the chip surface qualitatively reflects the temperature inside the microchannel with an average offset of 1–2°C.     

Modal Identification Study of Vincent Thomas Bridge Using Simulated Wind-Induced Ambient Vibration Data

Abstract:   In this article, wind-induced vibration response of Vincent Thomas Bridge, a suspension bridge located in San Pedro near Los Angeles, California, is simulated using a detailed three-dimensional finite element model of the bridge and a state-of-the-art stochastic wind excitation model. Based on the simulated wind-induced vibration data, the modal parameters (natural frequencies, damping ratios, and mode shapes) of the bridge are identified using the data-driven stochastic subspace identification method. The identified modal parameters are verified by the computed eigenproperties of the bridge model. Finally, effects of measurement noise on the system identification results are studied by adding zero-mean Gaussian white noise processes to the simulated response data. Statistical properties of the identified modal parameters are investigated under an increasing level of measurement noise. The framework presented in this article will allow us to investigate the effects of various realistic damage scenarios in long-span cable-supported (suspension and cable-stayed) bridges on changes in modal identification results. Such studies are required to develop robust and reliable vibration-based structural health monitoring methods for this type of bridge, which is a long-term research objective of the authors.     

Synthesis and rheological properties of an associative star polymer in aqueous solutions

Rheological properties of aqueous solutions and hydrogels formed by an amphiphilic star block copolymer, poly(acrylic acid)-block-polystyrene (PAA₅₄-b-PS₆)₄, were investigated as a function of the polymer concentration (C_p), temperature, and added salt concentration. The water-soluble polymer synthesised by atom transfer radical polymerization (ATRP) was found to form hydrogels at room temperature at polymer concentrations, C_p, over 22 g/L due to the interpolymer hydrophobic association of the PS blocks. Increasing C_p leads to stronger elastic networks at room temperature that show a gel-to-solution transition with increasing temperature. Increase of ionic strength decreases the moduli compared with the pure hydrogel but did not affect the gel-sol transition temperature significantly. Small-angle X-ray experiments showed two distinct scattering correlation peaks for samples above the gelling C_p, which indicates the aggregates formed due to hydrophobic association. Upon heating the intensity of the scattering correlation peaks was found to decrease indicating the loss of the network structure due to thermal motion.     

Prediction of capillary tubes with alternative refrigerants to CFC‐502

A numerical model is presented in this paper, for predicting capillary tube performance using new alternative refrigerants to CFC‐502. The model has been established after the fluid flow conservation equations written for a homogeneous azeotropic refrigerant fluid flow under saturated, sub‐cooled and two‐phase conditions. The study was limited to the following azeotropic mixtures; R‐507, R‐404A, and quaternary mixture (R32/R125/R134a/R143a). Numerical results showed that the proposed model in question fairly simulated our experimental data and fairly predicted the capillary tube behaviour under different conditions. The results also indicated that a system using R‐507 would experience smaller pressure drop across the capillary compared to the other alternatives under question. Copyright © 2001 John Wiley & Sons, Ltd.     

Instructional texts rewritten by five expert teams: Revisions and retention improvements.

700 undergraduates were tested in 3 experiments on original or rewritten versions of 52 instructional texts about Army job tasks, general science, philosophy, and history. Five experts had rewritten various sets of the texts and stated hypotheses about the efficacious features of their revisions. We tested their hypotheses and several others. Recall and recognition tests were given immediately and after a 24-hr delay. Results showed that revisions made by 3 of the 5 experts improved retention of text information. The kind and number of revisions and improvements varied across the text sets. Most expert hypotheses were not supported, and they made many revisions they were declaratively unaware of. Some of our hypotheses about the revision features were supported, but different features were effective for different sets of texts. It was concluded that some experts have effective knowledge about improving instructional text, but it exists primarily in procedural form. (PsycINFO Database Record (c) 2010 APA, all rights reserved)