Tolerance to transient faults in microprogrammed control units

The detection of and recovery from transient faults that cause errors in microprogrammed control units are addressed. Error detection is based upon a particular form of signature analysis, namely the run-time computation of a value (the signature) that depends strictly on the microprogram path (the sequence) under execution. The microprogram is statistically segmented (sequences are defined in a fixed way, at design time), and an anticipated signature is associated with each sequence. At run time, at the start of each sequence the computation of the signature is restarted, whereas at the end the computed signature is compared with the anticipated signature of the sequence. If the check is passed, the status of the control unit is saved in suitable registers, and the previously saved status is discarded. If the check fails, the last-saved status is restored (rolled back) and microprogram execution restarts from this last-saved point     

Conception of Stretchable Resistive Memory Devices Based on Nanostructure‐Controlled Carbohydrate‐block‐Polyisoprene Block Copolymers

It is discovered that the memory‐type behaviors of novel carbohydrate‐block ‐polyisoprene (MH‐b ‐PI) block copolymers‐based devices, including write‐once‐read‐many‐times, Flash, and dynamic‐random‐access‐memory, can be easily controlled by the self‐assembly nanostructures (vertical cylinder, horizontal cylinder, and order‐packed sphere), in which the MH and PI blocks, respectively, provide the charge‐trapping and stretchable function. With increasing the flexible PI block length, the stretchability of the designed copolymers can be significantly improved up to 100% without forming cracks. Thus, intrinsically stretchable resistive memory devices (polydimethylsiloxane(PDMS)/carbon nanotubes(CNTs)/MH‐b ‐PI thin film/Al) using the MH‐b ‐PI thin film as an active layer is successfully fabricated and that using the MH‐b ‐PI_12.6k under 100% strain exhibits an excellent ON/OFF current ratio of over 10⁶ (reading at ?1 V) with stable V _set around ?2 V. Furthermore, the endurance characteristics can be maintained over 500 cycles upon 40% strain. This work establishes and represents a novel avenue for the design of green carbohydrate‐derived and stretchable memory materials.     

Testability analysis and behavioral testing of the Hopfield neuralparadigm

Testability analysis and test pattern generation for neural architectures can be performed at a very high abstraction level on the computational paradigm. In this paper, we consider the case of Hopfield's networks, as the simplest example of networks with feedback loops. A behavioral error model based on finite-state machines (FSM's) is introduced. Conditions for controllability, observability and global testability are derived to verify errors excitation and propagation to outputs. The proposed behavioral test pattern generator creates the minimum length test sequence for any digital implementation     

Fault tolerance in FFT arrays: Time redundancy approaches

Fault tolerance in VLSI/WSI FFT arrays acquires relevance when defects and run-time faults become significant, due to large dimensions of processors and arrays. Then, both restructuring to overcome end-of-production defects and reconfiguration to overcome run-time faults are required, to achieve the dual purposes of higher yield and higher reliability.Adopting as basic FFT network the two-dimensions array that directly corresponds to the FFT flow graph, the usual structure redundancy techniques tailored for two-dimensions arrays reconfiguration are not well applicable, since the limited locality of this network leads to relevant area increase due to the augmented interconnection structure.In this paper,time redundancy is suggested as a viable alternative for the two-dimensions FFT array; two different solutions are presented, one based oninter-stage reconfiguration, the other one adoptingintra-state reconfiguration, both allowing for survival to multiple faults with limited increase of network complexity and very small hard-core sections. As usual in many time redundancy methods, both approaches result in a processing speed equal to half the processing speed granted by an ideal, fault-free device.Reliability and survival ratios to multiple faults are evaluated for the two cases, taking into account also the area increments necessary for fault tolerance. The reliability evaluations allow for a direct comparison of the two solutions.     

Transient electromagnetic field of a vertical magnetic dipole on atwo-layer conducting Earth

The transient field-frequency domain of magnetic dipole in a two-layered conducting Earth has been studied. It is obtained as a summation of waveguide modes plus contributions from branch cuts in the complex-plane of the longitudinal wave number. Results can be used to evaluate numerical solutions of more complicated modeling algorithms     

Live Load Distribution in Girder Bridges Subject to Oversized Trucks

A significant challenge facing motor carriers and engineers in this nation is the limitation of vehicle size and weight based on pavement and bridge capacity. However, the current demands of society and industry occasionally require a truck to carry a load that exceeds the size and weight of the legal limit. In these cases, engineering analysis is required before a permit is issued to ensure the safety of the structures and roadways on the vehicle's route. A truck with a wheel gauge larger than the standard 1.83 m (6 ft) gauge requires additional engineering effort because the wheel load girder distribution factors (GDFs) established by AASHTO cannot be used to accurately estimate the live load in the girders. In this study, the finite-element method is used to develop modification factors for the AASHTO flexure and shear GDFs to account for oversized trucks. The results of the analysis showed that the use of the proposed modification factors with the specification-based GDFs can help increase the allowable loads on slab-on-girder bridges.     

Acetylation of Wood with Various Catalysts

Abstract

The purpose of this study was to compare two different acetylation mechanisms using acetic anhydride (AA) or vinyl acetate (VA) modification with using various catalysts. Acetylation of Scots pine wood flour with acetic anhydride could be significantly improved in the presence of potassium acetate, potassium carbonate, and sodium carbonate at 100°C. Sodium carbonate had low effect on VA acetylation, potassium acetate was found to be more effective, and potassium carbonate was better for vinyl acetate modification of wood flour. The two modification methods and the effect of different catalysts on AA or VA modification were characterized by infrared and NMR spectra and analyzed in detail. The acetylation of Scots pine flour with VA and AA showed almost the same WPG values for catalysts when based on long reaction times.     

Copper activated LiF nanorods as TLD material for high exposures of gamma-rays

Lithium fluoride (LiF) doped with proper activators is a highly sensitive phosphor commonly used for radiation dosimetry using thermoluminescence (TL) technique. Nanorods of this material activated with Cu, Mg and P as single dopants are synthesized in our laboratory and exposed to gamma-rays for their thermoluminescence (TL) properties. The induced TL glow curves of the Cu, Mg and P doped samples are similar with a single peak at 410 K. Copper doped sample is found to be the most sensitive sample with TL intensity around 65, 7 and 8 times of those of LiF:Mg, LiF:P and LiF:Mg,Cu,P, respectively, indicating that Cu is the luminescence center in the host of LiF nanorods, while Mg and P act as TL quencher particularly when used as codopants. These observations on the nanostructured form of LiF doped with these activators are entirely different from those of the widely studied LiF:Mg,Cu,P and LiF:Mg,Ti single crystals. The nanorods of LiF:Cu might be used for heavy doses measurement as they are sensitive to gamma-rays and have a linear TL response curve in a long span of exposures.