Effect of expandable graphite and ammonium polyphosphate on the thermal degradation and weathering of intumescent fire-retardant coating

This research aims to study the effect of ammonium polyphosphate and expandable graphite on the intumescent coating formulations (ICF). The coating presented in this research article is based on carbon source expandable graphite (EG), blowing agent melamine, acid source ammonium polyphosphate (APP), epoxy resin as a binder with polyamide amine. The stability of the developed coating was verified at 950°C for 1-hour fire test. The results showed that the coating is stable and well bond with the steel substrate. The char was characterized by using FESEM, XRD, FTIR, DTA, TGA, XPS, Py-GCMS and Weathering Test. The morphology of the char was studied by SEM of the coating after furnace fire test. XRD and FTIR show the presence of graphite, borophosphate; boron oxide and sassolite in the residual char. TGA and DTG disclosed that EG improved the residual mass of coating. XPS analysis showed the char residue of IF5-APP-EG contains carbon and oxygen contents 47.50 and 40.70, respectively. Py-GCMS analysis described that the IF5-APP-EG released less gaseous compounds. The weathering test illustrated that's the char expansion of coatings samples was decreased due to the presence of a humid environment and UV light. The IF5-APP-EG showed the maximum char expansion, lower substrate temperature and high residual weight among the studied formulations.     

Wet Chemical Treatment and Mg Doping of p-InP Surfaces for Ohmic Low-Resistive Metal Contacts

Manufacturing a low-resistive Ohmic metal contact on p-type InP crystals for various applications is a challenge because of the Fermi-level pinning via surface defects and the diffusion of p-type doping atoms in InP. Development of wet-chemistry treatments and nanoscale control of p-doping for InP surfaces is crucial for decreasing the device resistivity losses and durability problems. Herein, a proper combination of HCl-based solution immersion, which directly provides an unusual wet chemical-induced InP(100)c(2 × 2) atomic structure, and low-temperature Mg-surface doping of the cleaned InP before Ni-film deposition is demonstrated to decrease the contact resistivity of Ni/p-InP by the factor of 10 approximately as compared to the lowest reference value without Mg. Deposition of the Mg intermediate layer on p-InP and postheating of Mg/p-InP at 350 °C, both performed in ultrahigh-vacuum (UHV) chamber, lead to intermixing of Mg and InP elements according to X-ray photoelectron spectroscopy. Introducing a small oxygen gas background (O₂ ≈ 10⁻⁶ mbar) in UHV chamber during the postheating of Mg/p-InP enhances the indium outdiffusion and provides the lowest contact resistivity. Quantum mechanical simulations indicate that the presence of InP native oxide or/and metal indium alloy at the interface increases In diffusion.     

Electrical capacitance tomography as a monitoring tool for high-shear mixing and granulation

Electrical capacitance tomography (ECT) was utilized for monitoring of high-shear mixing and high-shear granulation processes. A finite element method (FEM)-based reconstruction algorithm was utilized to take into account the specific geometrical characteristics of the experimental set-up. Two-dimensional ECT tomograms, mixing index curves and permittivity fractions were computed based on the measurements, and their suitability in the analysis of the processes was assessed. It was found that the different mixing processes and the different granulation processes could be analyzed based on these quantities.     

Preparation of nanocomposite dispersions based on cellulose whiskers and acrylic copolymer by miniemulsion polymerization: Effect of the silane content

A one‐step method was used to prepare stable aqueous nanocomposite dispersions based on cellulose whiskers extracted from the rachis of the date palm tree and a poly(styrene‐co‐2‐ethyl hexylacrylate) copolymer via miniemulsion polymerization. A reactive silane, i.e., methacryloxypropyl triethoxysilane was added to stabilize the dispersion and favor the anchoring of the whiskers on polymer particles. Dynamic light scattering was used to study the effect of the silane and whiskers contents on the average particle size of the polymer. Nanocomposites materials were prepared from these dispersions using a casting/evaporation method. The effect of the silane and whiskers contents on the thermal and mechanical properties were studied using differential scanning calorimetry and dynamic mechanical analysis. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers     

Investigation of the phase separation of PNIPAM using infrared spectroscopy together with multivariate data analysis

The use of vibrational spectroscopy to investigate complex structural changes in polymers yields chemically rich data, but interpretation can be challenging and subtle but meaningful spectral changes may be missed through visual inspection alone. Multivariate analysis is an efficient approach to gain an oversight of small but systematic spectral differences anywhere within the spectra, providing further insight into structural changes and associated transformation mechanisms. In this study, the novel analytical approach of infrared spectroscopy combined with principal component analysis and Gaussian peak fitting was used to investigate the structural changes in aqueous solutions of a polymer, using poly(N-isopropyl acrylamide) (PNIPAM) in the atactic form and with controlled tacticity as a model system. Subtle spectral changes associated with the dehydration and phase separation upon heating included peak shifts, an area ratio change of the amide I band to the amide II band and formation of a new peak in the amide I band were efficiently detected. Dehydration and phase separation of PNIPAM occurred in two temperature ranges, one for the atactic and one for isotactic rich part, both involving a complex re-organization of the hydrogen bonds and change of the hydration layer. The changes agreed with existing results from other techniques, and new insights were gained into the effect of controlled tacticity on phase transformation behaviour. The study demonstrates that infrared spectroscopy combined with the multivariate analytical method principal component analysis and Gaussian peak fitting is an efficient approach to probing structural change in polymers during heating. The simplicity of the presented approach could find excellent use in analysing and understanding the molecular environment of a range of stimuli-responsive polymers, for instance block or grafted types of polymers, as well as those with controlled tacticity.     

Pre-service teachers' perspectives of the diffusion of information and communications technologies (ICTs) and the effect of case-based discussions (CBDs)

This study investigates pre-service teachers' perspectives of the diffusion of information and communication technologies (ICTs) in elementary education and the effect of case-based discussions (CBDs). The sample consisted of 170 first-year pre-service teachers from elementary teacher education programs of the largest teacher education college in Turkey. The cases used in the study were obtained from a case repository at http://ornekolay.org, indexing teaching cases from elementary classrooms of the capital city of Turkey. The cases were mainly text-based and presented stories of elementary teachers' in-class usage of ICTs. A quasi-experimental pretest-posttest design was executed to test the effect of pre-service teachers' perspectives on ICTs diffusion in elementary teaching. Three scales were developed based on Rogers' Diffusion of Innovation Theory (2003) to measure pre-service teachers' preferred innovativeness, innovation perceptions, and innovation decisions in the use of ICTs. The results showed that pre-service teachers had pre-established perspectives, mainly positive, about the diffusion of ICTs in elementary teaching; their perceptions about innovativeness and relative advantage were the main indicators of persuasion and decision; and CBDs positively affected their perceptions such that their computer-related persuasion and decisions positively increased.     

LASER SHORT-PULSE HEATING: INFLUENCE OF LASER POWER INTENSITY ON TEMPERATURE FIELDS

High-power-intensity and short-pulse laser heating of metallic surfaces results in thermal separation of electron and lattice subsystems. In this case, energy transport between the subsystems is governed mainly by the collisional process. Moreover, electron and lattice subsystems respond differently for different pulse intensities, despite the fact that the laser pulses have the same energy content. Consequently, in the present study, laser step-input pulse heating of gold substrate is considered and the thermal response of electron and lattice subsystems to four different intensity pulses with the same energy content is examined. The electron kinetic theory approach is introduced to model the nonequilibrium energy transport in the substrate material. It is found that electron temperature rises rapidly in the heating cycle while lattice temperature rise is gradual, which is more pronounced for laser short pulse lengths. In the cooling cycle (time after the laser pulse diminishes), electron temperature decay rate differs from the rate of lattice site temperature rise due to the specific heat ratios of electron and lattice sites.     

Performance evaluation of OFDM and single‐carrier systems using frequency domain equalization and phase modulation

In this paper, we study the performance of the continuous phase modulation (CPM)‐based orthogonal frequency division multiplexing (CPM‐OFDM) system. Also, we propose a CPM‐based single‐carrier frequency domain equalization (CPM‐SC‐FDE) structure for broadband wireless communication systems. The proposed structure combines the advantages of the low complexity of SC‐FDE, in addition to exploiting the channel frequency diversity and the power efficiency of CPM. Both the CPM‐OFDM system and the proposed system are implemented with FDE to avoid the complexity of the equalization. Two types of frequency domain equalizers are considered and compared for performance evaluation of both systems; the zero forcing (ZF) equalizer and the minimum mean square error (MMSE) equalizer. Simulation experiments are performed for a variety of multipath fading channels. Simulation results show that the performance of the CPM‐based systems with multipath fading is better than their performance with single path fading. The performance over a multipath channel is at least 5 and 12 dB better than the performance over a single path channel, for the CPM‐OFDM system and the proposed CPM‐SC‐FDE system, respectively. The results also show that, when CPM is utilized in SC‐FDE systems, they can outperform CPM‐OFDM systems by about 5 dB. Copyright © 2010 John Wiley & Sons, Ltd.     

Thermal performance of different pond cells under actual climatic conditions in Qatar

Experimental work was undertaken to study the thermal performance of three different pond cells under actual climatic conditions of Qatar. The first cell was an open pond. In the second unit, a finned radiator, painted black, was placed over the pond. In the third cell, the water was contained in a polyethylene bag. Experimental results indicated that the exposed pond cell came out best, when considered in terms of how quickly the temperature of the stored water could be reduced, and how low that temperature could be. The water in the exposed pond was cooled directly (by evaporation and radiation to sky) whereas in the case of the finned radiator cell, heat had to be transferred from the stored water to the radiator, and then from the radiator to the surrounding. In the case of water-in-bag cell, evaporation was eliminated and radiative exchange with the sky was reduced due to the partial transparency of the polyethylene bag (in the infrared region).