Fracture initiation at a crack or notch in a viscoplastic material under high rate loading

The two-dimensional problem of an edge crack in a half space or plate is considered. The body is loaded by a suddenly applied, spatially uniform normal velocity imposed on the plane boundary of the body on one side of the edge crack. Otherwise, the boundary of the body, including the crack faces, is traction free. Both cases of an initially sharp crack tip and a narrow notch with small but nonzero notch root radius are considered. The material is modeled as elastic viscoplastic, including strain hardening, rate sensitivity and thermal softening. The applied loading produces predominantly mode II loading in the crack tip region. Under these conditions it is possible to nucleate an adiabatic shear band at the crack tip as a precursor to a mode II fracture. On the other hand, because of the rate sensitivity of the material and the high rate of loading, it may be possible under certain conditions to generate tensile stresses in the crack tip region sufficiently large to nucleate brittle tensile fracture. The problem is solved numerically by means of the finite element method in order to investigate the competition between these two possible fracture initiation mechanisms. The magnitude of the impact velocity imposed on the edge of the plate and the notch tip acuity have an effect on processes near the crack tip. For given material, the inception of crack growth is determined by the competition between a stress-based brittle fracture condition, associated with rate sensitivity and strain hardening, and a strain based criterion, associated with high strain rate and thermal softening.     

Quartz microbalance study of4He and H2 on sodium

A quartz microbalance technique has been used to study the growth of⁴He and H₂ adsorbed on sodium. In contrast to cesium, adsorption of⁴He and H₂ do occur on a sodium surface.     

Quantitative NMR spectroscopy by matrix pencil methods

The matrix pencil (MP) method, based on the singular value decomposition (SVD), is applied to quantitative NMR spectroscopy. Its relationship to other SVD-based methods is also presented. Simulations and applications are given to demonstrate the capability of superior performance.©1993 John Wiley & Sons Inc     

Parallel BIST architecture for CAMs

A new parallel test algorithm and a built-in self test (BIST) architecture for efficient testing of various types of functional faults in content addressable memories (CAMs) are developed. The results show that efficient and practical testing with very low complexity and area overhead can be achieved     

Simple approximations of the DC flux influence on the core losspower electronic ferrites and their use in design of magnetic components

The effect of DC flux on the core loss is examined for the practical range of power and frequency. Relevant core loss equations are derived and applied to an optimization algorithm to determine the minimum core loss at a given ratio of s (DC flux density to AC peak flux density). It has been found that the curves of hysteresis loss density versus the ratio of s exhibit a peak at a critical ratio. Below or above this critical ratio, the loss density decreases drastically. On the other hand, the curves of eddy-current loss density versus the ratio of s exhibits a minimum point at a critical ratio. Below or above this critical ratio, the loss density increases gradually     

Solving the gate packing problem using a concurrent network

The layout problem of gate matrices and one-dimensional logic arrays is composed of two major tasks: to find a permutation of gates which minimises the number of tracks required and to layout/pack gates based on the ordering. A parallel algorithm is presented which can pack n gates within O(1) time, whereas the conventional near-optimum algorithm needs O(n/sup 2/) time. The simulation results show that the increase of the problem size does not degrade the solution quality.<>     

Solder engineering for optoelectronic packaging

In addition to providing electrical connections, solder is useful in the formation of passive, precision alignments for optoelectronic packaging. Different designs have demonstrated micrometer-level alignment accuracies, and the aligned structures are becoming more and more complex. Solder engineering has been successfully introduced into the field of optoelectronics, and it is expected to be applied to many other areas demanding low-cost, precision alignments.     

On detecting the presence of fetal R-wave using the moving averagedmagnitude difference algorithm

An efficient algorithm detecting the presence of a fetal QRS complex is presented. The proposed fetal QRS detection method computes the averaged magnitude of the difference between the fetal ECG signal and the reference signal to detect the fetal QRS event. The detected fetal QRS complexes are exponentially averaged to generate the template signal which can track the slowly varying shape of the fetal ECG signal. As an effort to obtain improved detection performances, two approaches of normalizing the fetal ECG signal and the template are considered.