某厂锆（Zr）生产流程中不同产物的天然放射性核素含量测定

本文报道了某厂锆(Zr)生产流程中原料(锆英砂,主要成份为 ZrSiO_4)、半成品(ZrC,ZrCl_4)、废渣和成品锆中天然放射性核素~(238)U、~(226)Ra、~(232)Th 和~(40)K 含量测定结果。采用 NaI(Tl)γ能谱法进行测定,结果表明,原料、半成品和废渣中都含有一定的放射性,各生产环节应采取适当的防护措施;成品锆中基本不含放射性,可安全地应用于各个生产和生活领域。     

大小样品在液氮中的淬冷沸腾换热比较研究

分析了大小样品在液氮中的淬冷沸腾换热特性。大小样品的淬冷沸腾换热有着明显的差别，小样品的热流密度比大样品的明显高得多。小样品的淬冷沸腾有一起始段，其温降高达６０Ｋ。从实验结果还可以看到，小样品的Ｌｅｉｄｅｎｆｒｏｓｔ点和临界热流点对应的壁面过热度明显比大样品的高。最后还分析了样品直径对临界热流密度的影响。     

Paracetamol poisoning in the north east of England: presentation, early management and outcome

1. Paracetamol is increasingly involved in self-poisoning in the United Kingdom and remains a common cause of fatal poisoning. 2. To document the epidemiology and early management of paracetamol poisoning data were collected on consecutive patients with suspected paracetamol poisoning presenting to 6 hospitals in the North East of England over 12 weeks in 1994. 3. There were 400 presentations (attendance rate 1.14/10(3) population/yr) involving 343 persons (45% male). Paracetamol concentrations at 4 h correlated weakly with reported paracetamol dose (R = 0.49, P < 0.0001) and were similar comparing those treated and not treated by gastric decontamination. 4. In 38 (9%) cases paracetamol concentrations were above the appropriate nomogram treatment line, including 3% and 20% of patients who reported ingesting less than and more than 12 g respectively. In 21 patients acetylcysteine treatment was deferred until admission to the ward, the mean delay involved was 2.8 h. 5. One patient died, from arrhythmias caused by co-ingested dothiepin. 6. Paracetamol poisoning is common. Most cases do not have potentially toxic plasma paracetamol concentrations, but those who do often present late and antidotal treatment may be delayed inappropriately.     

The summary of researches on ADS in China

The conceptual study on the accelerator driven system (ADS) that lasted for about five years ended in 1999 in China. As one project of the National Basic Research Program of China (973 Program) in the energy domain, which is sponsored by the China Ministry of Science and Technology (MOST), a five-year-program of fundamental research of ADS physics and related technology was launched in 2000 and passed national review at the end of 2005. The China Institute of Atomic Energy (CIAE), the Institute of High Energy Physics (IHEP), the Institute of Heavy Ion Physics in Peking University (PKU-IHIP) and other institutions jointly carried out the research. The research activities were focused on HPPA physics and technology, reactor physics of external source driven sub-critical assembly, nuclear data base and material study. For HPPA, a high current injector consisting of an ECR ion source, LEBT and an RFQ accelerating structure of 3.5 MeV was built. In reactor physics study, a series of neutron multiplication experimental study has been carried out and still being done. The VENUS facility has been constructed as the basic experimental platform for neutronics study in ADS blanket. It’s a zero power sub-critical neutron multiplying assembly driven by external neutron produced by a pulsed neutron generator. The theoretical, experimental and simulation study on nuclear data, material properties and nuclear fuel circulation related to ADS is carrying on to provide the database for ADS system analysis. The main results on ADS related researches will be reported.     

Electron microscopic observations and DNA chain fragmentation studies on apoptosis in bone tumor cells induced by ~(153)Sm-EDTMP

ＥｌｅｃｔｒｏｎｍｉｃｒｏｓｃｏｐｉｃｏｂｓｅｒｖａｔｉｏｎｓａｎｄＤＮＡｃｈａｉｎｆｒａｇｍｅｎｔａｔｉｏｎｓｔｕｄｉｅｓｏｎａｐｏｐｔｏｓｉｓｉｎｂｏｎｅｔｕｍｏｒｃｅｌｓｉｎｄｕｃｅｄｂｙ１５３ＳｍＥＤＴＭＰＺｈｕＳｈｏｕＰｅｎｇ，Ｘｉａ...     

用于疏通油水井的脉冲放电技术

评价了各种不同的解堵技术，指出冲击波解堵是一种很有发展前途的技术。介绍了液中脉冲放电产生冲击波的基本原理，并由此研制出了一套井下脉冲放电油水井处理设备样机。通过现场试验，表明用冲击波疏通油井能较好地解除油井污染，提高采收率。     

地域通信网中基于业务量的动态路由研究

本文从地域通信网的特点出发，分析了以前所使用的路由选择方法的优缺点，提出了网控支持的基于业务量的动态中币管理方法，并描述了该路由管理方法的分层结构和在地域网网络管理系统中的具体实现。     

Influence of rubber content in ABS in wide range on the mechanical properties and morphology of PC/ABS blends with different composition

A series of acrylonitrile–butadiene–styrene (ABS) with different rubber content were prepared by diluting ABS grafting copolymer containing 60% rubber with a styrene–acrylonitrile copolymer. ABS prepared were blended with bisphenol‐A‐polycarbonate (PC) at the ratio of 70/30, 50/50, and 30/70 to prepare PC/ABS blends. Influence of rubber content in ABS on the properties of ABS and PC/ABS blends were investigated. PC/ABS blends with different compositions got good toughness when the rubber in ABS increased to the level that ABS itself got good toughness. The tensile properties and processability of PC/ABS blends decreased with the increase of the total rubber content introduced into the blends. ABS with the rubber content of 30 wt% is most suitable to be used to prepare PC/ABS blends. The rubber content in ABS affected the viscosity of ABS, and subsequently the viscosity ratio of PC to ABS. As a result, the morphology of PC/ABS blends varied. The increase of rubber content in ABS results in finer structure of PC/ABS blends. POLYM. ENG. SCI. 46:1476–1484, 2006. © 2006 Society of Plastics Engineers.