Effect of hydrophobic hexafluoroisopropylidene group on the water sorption behaviors of rigid poly(p‐phenylene pyromellitimide) polyimide thin films

We prepared poly(p‐phenylene pyromellitimide) (PMDA–PDA), poly(p‐phenylene 4,4′‐hexafluoroisopropylidene diphthalimide), and their copolyimides with various compositions to explore the relationship between the water sorption and structure. The water sorption behaviors were gravimetrically investigated as a function of composition and temperature and interpreted with a Fickian diffusion model in films. Overall, the water sorption behaviors were strongly dependent on the changes in morphological structure, which originated from the variations in composition. When the content of the bulky hexafluoroisopropylidene group (6FDA) was increased, the water uptake decreased from 5.80 to 3.18 wt %, whereas the diffusion coefficient increased from 3.6 × 10^?10 to 11.3 × 10^?10 cm²/s. The relatively high water uptake in the PMDA–PDA polyimide film was successfully healed by the incorporation of 6FDA, which may have resulted from the increases in the intermolecular packing order and hydrophobicity. The degree of orientation and crystallinity, which are in‐plane characteristics, were directly correlated to the diffusion coefficient and activation energy in the polyimide film. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3442–3446, 2003     

Growth Mechanisms for SiC–AlN Solid Solution Crystals Prepared by Combustion Synthesis

AlN–SiC solid solution particles with a variety of morphologies including faceted polyhedrons with or without ledges; hexagonal platelets; hexagonal columns with a hexagonal plate or a pyramidal cap; and interpenetrating cones, have been found in the combustion products of a mixture of Al, Si, and carbon black under a nitrogen pressure of 10 MPa. Combustion temperature (the growth temperature of crystals) is the most important factor controlling the morphology of crystals formed in the combustion product. When temperatures are close to the melting point of the solid solutions, a small driving force for nucleation and long distances of surface migration make nucleation on the basal plane difficult, and thus the solid solution particles tend to grow as platelets. Supersaturation is the second key factor influencing crystal growth. At relatively low temperatures, a low supersaturation at the large pores renders nucleation difficult and the solid solution particles tend to grow as platelets. At relatively low temperatures and high supersaturation, a relatively high driving force for nucleation and short mean distances of surface migration promote the growth of AlN–SiC solid solutions as polyhedrons. The formation of the ledges on the polyhedral particles is attributed to the differences in the evaporation rates and the deposition rates between Al and Si. At relatively low temperatures and an intermediate supersaturation, the solid solution particles grow as prismatic columns. The formation of the prismatic columns with a hexagonal plate, or a pyramidal cap, is attributed to a sudden change of temperature during combustion. A possible growth mechanism for the AlN–SiC solid solution cones is proposed.     

Rheological behavior of two-phase polymer melts

Rheological behavior of dispersed two-phase polymer melts has been investigated by means of a capillary rheometer. The two-phase systems chosen for study were blends of two polymers: high-density polyethylene and polystyrene, which are incompatible in the molten state. In order to investigate the state of dispersion, photographs were taken of the microstructure of extrudate samples, showing that the polystyrene forms long fibers or droplets as a discrete phase dispersed in the polyethylene which forms a continuous phase. Measurements were made of the axial pressure distributions of the two-phase molten polymers flowing through circular tubes, which permit one, according to the theory advanced by Han, to determine viscous and elastic properties of the melts. Also measured was melt die swell ratio. It has been found from the two independent experimental techniques that there exist a maximum and/or minimum elastic property at a certain blending ratio, and that the elastic property decreases first with L/D ratio of a capillary and then levels off.     

Manufacturing and foaming of high melt viscosity of polypropylene by using electron beam radiation technology

The high melt viscosity of polypropylene was studied by grafting bifunctional monomers, 1,6‐hexanediol diacrylate (HDDA) and tripropylene glycol diacrylate (TPGDA), onto homopolypropylene (HPP) and random ter‐polypropylene (RTPP) under electron‐beam irradiation. Creation of the high‐melt‐viscosity polypropylene was possible at low radiation dosage and low monomer content, under a prohibition of both radiation degradation and homopolymerization. TPGDA monomer was more effective in increasing the melt viscosity of HPP compared with RTPP, whereas HDDA monomer was more effective for enhancing the melt viscosity of RTPP. Such different effects of monomers on melt viscosity may arise from different monomer structures, namely, TPGDA has additional three methyl groups, but HDDA has no methyl groups. Electron‐beam radiation technology, on an increase of the melt viscosity, was much more effective in HPP than RTPP, when compared with virgin polymers. Modified RTPP and HPP with high melt viscosity were capable of foaming with numerous fine cells, of which the modified HPP with 1.5 mmol TPGDA and 0.5 kGy could create more spherical foam cells and its bending strength was 1.5 times more than that of the foamed RTPP. POLYM. ENG. SCI., 46:431–437, 2006. © 2006 Society of Plastics Engineers.     

Communicating Is Crowdsourcing: Wi-Fi Indoor Localization with CSI-Based Speed Estimation

Numerous indoor localization techniques have been proposed recently to meet the intensive demand for location-based service (LBS). Among them, the most popular solutions are the Wi-Fi fingerprint-based approaches. The core challenge is to lower the cost of fingerprint site-survey. One of the trends is to collect the piecewise data from clients and establish the radio map in crowdsourcing manner. However the low participation rate blocks the practical use. In this work, we propose a passive crowdsourcing channel state information (CSI) based indoor localization scheme, C²IL. Despite a crowdsourcing based approach, our scheme is totally transparent to the client and the only requirement is to connect to our 802.11n access points (APs). C²IL is built upon an innovative method to accurately estimate the moving speed solely based on 802.11n CSI. Knowing the walking speed of a client and its surrounding APs, a graph matching algorithm is employed to extract the received signal strength (RSS) fingerprints and establish the fingerprint map. For localization phase, we design a trajectory clustering based localization algorithm to provide precise real-time indoor localization and tracking. We develop and deploy a practical working system of C²IL in a large office environment. Extensive evaluations indicate that the error of speed estimation is within 3%, and the localization error is within 2 m at 80% time in a very complex indoor environment.     

Buckling of jets in electrospinning

Various buckling instabilities of electrospinning jets were observed and compared with the buckling instabilities of uncharged fluid jets. Buckling instability arises due to jet compression at impingement on a collector surface and occurs independently of the electrical bending instability. The velocity, diameter, density and viscosity of the electrospinning jets are the key factors that determine the buckling frequency. The electrically charged jets impinging onto grounded, horizontal or inclined (wedge-like) electrodes moving laterally at a constant velocity are studied experimentally. Straight and bending (electrospinning) jets emerge at short and sufficiently long inter-electrode distances, respectively. The experiments show that both straight segment and bending jets, when impinging onto a counter-electrode, buckled and produced patterns of meandering deposits. In the case of bending electrospun jets these short-length buckling patterns were superimposed on the bending loops found in the deposits. Buckling-related and bending-related morphologies are easily distinguishable. The buckling patterns have frequencies of the order of 10⁵-10⁶ Hz, whereas the bending loops are formed at the frequencies of the order of 10³ Hz. The deposited buckling patterns include sinuous, zigzag-like, figures-of-eight, recurring curves, coiled and other structures that resembled many patterns created by uncharged jets of highly viscous fluids impinging a hard flat surface. In addition, several new morphologies which were not observed before with uncharged jets were found. The experimentally measured frequencies of the buckling patterns were compared to the theoretical predictions and a reasonable agreement was found.     

多降液管筛板塔的设计计算

简要介绍多降液管筛板塔的特点及塔板参数的设计计算方法。     

Modification of a carbon/carbon composite with a thermosetting resin precursor as a matrix by the addition of carbon black

Carbon/carbon composites were made through the pyrolysis of stabilized PAN felt and phenolic resin with the addition of 5 or 10 wt % carbon black to the matrix and then heat treatment at 600–2500°C. The effects of adding carbon black to the matrix precursor on the physical properties, microstructure, and mechanical properties of the resultant composites were investigated. Adding carbon black not only reduced the weight loss but also limited the shrinkage of the resultant composites. Adding carbon black also accelerated the formation of carbon basal planes in the matrix. At 2500°C, the crystalline stacking height in the composite with 10 wt % added carbon black was 200% greater than that with no additive. The flexural strength of the composite also increased from 15 to 42 MPa (almost 300%). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 333–337, 2006     

用电势法测定混合电解质溶液中各个组分的活度系数

本文用无液接电势电池：Ｎａ－ＩＳＥ（或Ｋ－ＩＳＥ）｜（ＮａＣｌ（ｍＡ），ＫＣｌ（ｍＢ），Ｈ２Ｏ｜Ｃｌ－ＩＳＥ同时测定了２９８．１５Ｋ，溶液离子强度Ｉ：０．１、０．５、１．０、１．５、２．０和２．５ｍｏｌ／ｋｇ时，钠电极与氯电极组成的电池和钾电极与氯电极组成的电池的可逆电势值，根据Ｎｅｒｎｓｔ方程分别求出ＮａＣｌ－ＫＣｌ－Ｈ２Ｏ体系中，ＮａＣｌ和ＫＣｌ的平均活度系数。用Ｐｉｔｚｅｒ方程拟合两套实验数据，求出两套基本一致的Ｐｉｔｚｅｒ混合参数θＮａ－Ｋ和。将混合参数代回Ｐｉｔｚｅｒ方程，分别求出另一组分的平均活度系数，计算值与实验值比较，标准偏差分别为：０．００８１（ＮａＣｌ）和０．００７３（ＫＣｌ）。     

基于WEB的高校教材评价体系的研究与实现

建立基于WEB的教材评价体系,可以及时有效地收集到学生、教师、专家对教材科学的评价意见,并且可以自动生成教材综合评级,为以后的教材编写和教材选取提供科学可靠的重要依据。本文为实现高效、科学、规范、准确的高校教材评价设计开发了一个简易高效的基于WEB的平台,系统基于MVC架构,采用JSP进行功能实现,数据库采用MySQL实现,WEB容器采用TomCat实现。设计中按逻辑划分为:模型(Model)、视图(View)、控制(Control)三个层次。